Professional Documents
Culture Documents
com)
Search...
The ASME B16.34 specification covers pressure and temperature ratings for forgings, castings, plate,
bar, and tubular products. The ASME B16.34 charts show the max allowed pressure for a material
depending on the product rating and the process temperature (the higher the temperature, the lower
the pressure at a given rating).
1.1 C A105 A216 Gr. A515 Gr. A675 Gr. A672 Gr.
C-SI A350 Gr. WCB 70 70 B70
C-MN-SIC- LF2A350 A516 Gr. A105 A672 Gr.
MN-SI-V Gr. LF6 70 A350 Gr. C70
Cl.1 A537 Gr. LF2
Cl.1 A696 Gr.
C Welcome to our online shop: can
I help you?
1.5 C-1/2MO A182 Gr. A217 Gr. A204 Gr. A A182 Gr. A691 Gr.
F1 WC1 A204 Gr. B F1 CM-70
A352 Gr.
LC1
1.7 C-1/2MO A182 Gr. A217 Gr. A204 Gr. C A182 Gr. A691 Gr.
1/2CR-1/2MO F2 WC4 F2 MC-75
NI-1/2CR- A217 Gr.
1/2MO WC5
3/4NI-MO-
3/4CR
1.9 1CR-1/2MO A182 Gr. A217 Gr. A387 Gr. A182 Gr. –
1 1/4CR- F12 Cl.2 WC6 11 Cl.2 F12 Cl.2
1/2MO-SI A182 Gr. A182 Gr.
1 1/4CR- F11 Cl.2 F11 Cl.2 Welcome to our online shop: can
1/2MO A739 Gr. I help you?
B11
1.15 9CR-1MO-V A182 Gr. A217 Gr. A387 Gr. A182 Gr. A335 Gr.
F51 C12A 91 Cl.2 F91 P91
[1] Upon prolonged exposure to temperatures above 800°F, the carbide phase of the steel may be converted to graphite.
[5] For service temperatures above 850°F, it is recommended that killed steels containing not less than 0.10% residual
1.2 C-SI A350 Gr. A352 Gr. A203 A350 A106 Gr.
2 1/2 NI LF3 [2] LC2 [2] Gr. B Gr. C [3]
3 1/2 NI A350 Gr. A352 Gr. [1] LF3
C-MN-SIC-MN-SI-V LF6 Cl.2 LC3 [2] A203 [2]
[4] A216 Gr. Gr. E
WCC [1] [1]
A352 Gr.
LCC [2]
[1] Upon prolonged exposure to temperatures above 800°F, the carbide phase of the steel may be converted to graphite.
Permissible, but not recommended for prolonged use above 800°F. Welcome to our online shop: can
[2] Not to be used over 650°F. I help you?
[1] Upon prolonged exposure to temperatures above 800°F, the carbide phase of the steel may be converted to graphite.
silicon be used.
[1] Upon prolonged exposure to temperatures above 800°F, the carbide phase of the steel may be converted to graphite.
[3] Leaded grades shall not be used where welded in any application above 500°F.
Welcome to our online shop: can
I help you?
Maximum gage pressure (in psi) by temperature for Group 1.4
ASME B16.34 materials:
1.5 C-1/2MO A182 Gr. A217 Gr. A204 A182 A691 Gr.
F1 [1] WC1 [1] Gr. A Gr. F1 CM-70
[2] [1] [1] [1]
A352 Gr. A204
LC1 [3] Gr. B
[1] Upon prolonged exposure to temperatures above 875°F, the carbide phase of carbon-molybdenum steel may be
converted to graphite. Permissible, but not recommended for prolonged use above 875°F.
200 260 680 905 1360 2035 3395 5660 Welcome to our online shop: can
I help you?
300 230 655 870 1305 1955 3260 5435
[1] Upon prolonged exposure to temperatures above 875°F, the carbide phase of carbon-molybdenum steel may be
converted to graphite. Permissible, but not recommended for prolonged use above 875°F.
[2] Permissible, but not recommended for prolonged use above 1100°F.
500 170 550 735 1105 1655 2755 4595 I help you?
2.1 18CR-8NI A182 Gr. A351 Gr. A240 Gr. A182 Gr. A312 Gr.
F304 CF3 304 F304 TP304
A182 Gr. A351 Gr. A240 Gr. A182 Gr. A312 Gr.
F304H CF8 340H F304H TP304H
A479 Gr. A358 Gr. 304
304 A376 Gr.
A479 Gr. TP304
304H A376 Gr.
TP304H
A430 Gr.
FP304
A430 Gr.
FP304H
2.2 16CR-12NI-2MO A182 Gr. A351 Gr. A240 Gr. A182 Gr. A312 Gr.
18CR-8NI18CR- F316 CF3A 316 F316 TP316
13NI-3MO A182 Gr. A351 Gr. A240 Gr. A182 Gr. A312 Gr.
16CR-12NI-2MO F316H CF8AA351 316HA240 F316H TP316H
19CR-10NI-3MO Gr. CF3M Gr. 317 A479 Gr. A358 Gr. 316
A351 Gr. 316 A376 Gr.
CF8M A479 Gr. TP316
A351 Gr. 316H A376 Gr.
CG8M TP316H
A430 Gr.
FP316
A430 Gr.
FP316HA312
Gr. TP317
Welcome to our online shop: can
I help you?
2.4 18CR-10NI-TI A182 Gr. – A240 Gr. A182 Gr. A312 Gr.
F321 321 F321 TP321
A182 Gr. A240 Gr. A479 Gr. A312 Gr.
F321H 321H 321 TP321H
A182 Gr. A358 Gr. 321
F321H A376 Gr.
A479 Gr. TP321
321H A376 Gr.
TP321H
A430 Gr.
FP321
A430 Gr.
FP321H
2.5 18CR-10NI-CB A182 Gr. A351 Gr. A240 Gr. A182 Gr. A312 Gr.
F347 CF8C 347 F347 TP347
A182 Gr. A240 Gr. A182 Gr. A312 Gr.
F347H 347H F347H TP347H
A182 Gr. A240 Gr. A182 Gr. A358 Gr.
F348 348 F348 TP347
A182 Gr. A240 Gr. A182 Gr. A376 Gr.
F348H 348H F348H TP347
A479 Gr. A376 Gr.
347A479 TP347H
Gr. 347H A376 Gr.
A479 Gr. TP348
348 A430 Gr.
A479 Gr. FP347
348H A430 Gr.
FP347H
A312 Gr.
TP348
A312 Gr.
TP348H
2.7 25CR-20NI A182 Gr. A351 Gr. A240 Gr. A182 Gr. A312 Gr.
F310H CK20 310S F310H TP310HA358
A240 Gr. A479 Gr. Gr. 310H
310H 310H
A479 Gr.
310S
2.1 18CR-8NI A182 Gr. A351 Gr. A240 A182 A312 Gr.
F304 [1] CF3 [2] Gr. Gr. TP304
A182 Gr. A351 Gr. 304 F304 [1]
F304H CF8 [1] [1] [1] A312 Gr.
A240 A182 TP304H
Gr. Gr. A358 Gr.
340H F304H 304 [1]
A479 A376 Gr.
Gr. 304 TP304
[1] [1]
A479 A376 Gr.
Gr. TP304H
304H A430 Gr.
FP304
[1]
A430 Gr.
FP304H
[1] At temperatures over 1000°F, use only when the carbon content is 0.04% or higher.
[1] Use with buttweld valves only. Flanged end rating stop at 1000°F.
1450 20 [1] 60 80 115 175 290 485 Welcome to our online shop: can
I help you?
3.15 33NI-2FE-21CR B564 Gr. B494 Gr. B409 B408 Gr. B407 Gr.
NI-MO N08810 N-12MW Gr. N08810 N08810
NI-MO-CR B494 Gr. N08810
CW-
12MW
3.16 35NI-19CR-1 1/4SI B511 Gr. – B536 B511 Gr. B535 Gr.
N08330 Gr. N08330 N08330
N08330
1000 20 95 125 185 280 465 770 Welcome to our online shop: can
I help you?
1050 20 [1] 75 100 150 220 370 615
[1] Use with buttweld valves only. Flanged end rating stop at 1000°F.
[1] Use with buttweld valves only. Flanged end rating stop at 1000°F.
We recommend purchasing the ASME B16.34 specification from the ASME website
(https://www.asme.org/products/codes-standards/b1634-2017-valvesflanged-threaded-welding-
end)or f (https://www.techstreet.com/standards/asme-b16-34-2017?product_id=1990370)rom the IHS
store (https://global.ihs.com/doc_detail.cfm?rid=GS&item_s_key=00007189)to get a complete
understanding of this topic.
Buy
Lincoln
Electric
Welcome to our online shop: can
Products I help you?
Solder & Flux
An Endless
Assortment on
One Easy-to-Use
Site. Register for Privacy & Cookies Policy
F Shi i
Free Shipping.
Shop Now!
zoro.com
OPEN
Ni
Alloys
Competitively
Priced
Langley Alloys
Are A Leading
Supplier Of Ni
Alloys. Contact
Our Team
Today For More
Info.
langleyalloys.com
OPEN
casting mold
O
FF
A quality tool is
ER
not only
manufactured to
specification, but
is designed to
maximize
kl-mould.com
OPEN
Privacy & Cookies Policy
Need an Offer?
Post your RFQ · Get Offers · Close Deals
One Response
https://waterfallmagazine.com (https://waterfallmagazine.com)
Thank you for sharing your thoughts. I really appreciate your
efforts and I will be waiting for your next write ups thank you once again.
Reply
Leave a Reply
Your email address will not be published. Required fields are marked *
Comment
Name *
Email *
Post Comment
(https://blog.projectmaterials.com/project-procure (https://blog.projectmaterials.com/pipes/pipe-end
Stay in Touch
Projectmaterials is the world’s most viewed website for piping products. We have more than 2.5 million visitors
per year, and counting
SUBSCRIBE
Leave your email to receive our news. We won’t spam you or sell your profile to anyone.
(https://www.youtube.com/channel/UC3DIAnU3KtfA_j2XAUysPmQ)
(https://www.linkedin.com/company/projectmaterials/)
(https://www.facebook.com/projectmaterials34/)
(https://twitter.com/proj_materials)
(https://www.pinterest.ch/projectmaterials/)
(https://projectmaterials.com)
Contact Us (mailto:rfqs@projectmaterials.com)