LGFP 2 LGFP 2 is a clean, non-toxic grease which is based on medical white oil using an aluminium complex soap. This is formulated using only FDA* tested ingredients and is authorised by the NSF** for category H1*** service.
* FDA - Food and Drug Administration
** NSF - National Sanitation Foundation *** H1 - Incidental Contact with Food
■ Compliance with all existing legislation on food protection
■ High resistance to water washout making it suitable for applications subject to frequent wash down ■ Excellent grease life ■ Excellent corrosion resistance ■ An essentially neutral pH value
Technical specifications Typical applications where
Basic characteristics LGFP 2 can provide excellent DIN 51825 code K2G-20 lubrication include: NLGI consistency class 2 Soap type aluminium complex ■ Bakery equipment Colour transparent ■ Food processing equipment Base oil type medical white oil Operating temperature range, ºC (ºF) -20 to 110 (-4 to 230) ■ Multipack cassette bearings Dropping point DIN ISO 2176, ºC (ºF) 250 min. (482 min.) ■ Wrapping machines Base oil viscosity 40 ºC, mm /s 2 130 ■ Conveyor bearings 100 ºC,mm2/s 7,3 Penetration DIN ISO 2137 60 strokes, 10-1 mm 265-295 Bearing operating conditions 100,000 strokes, 10-1 mm +30 max. Temperature Medium Mechanical stability Speed Medium Roll stability, 50 hours at 80 ºC, change 10-1 mm - Load Medium to low SKF V2F test - Corrosion protection Vertical shaft O SKF Emcor: Outer ring rotation - - standard ISO 11007 - water washout test 0-0 - Oscillating movements - - salt water test (100% seawater) - Low friction O Water resistance Shock load or frequent start up - DIN 51 807/1, 3 hrs at 90 ºC 1 max. Low noise - Oil separation DIN 51 817, 7 days at 40 ºC, static, % 1-5 Severe vibration - Lubricating ability Rust inhibiting properties + SKF R2F, running test B at 120 °C - Water resistance + Copper corrosion + = Recommended O = Suitable - = Not suitable