Professional Documents
Culture Documents
com
PRINCIPLE
The single unit or multiple reed switch units are When the float internal magnet approaches the
housed tightly in stainless steel or engineering reed switch, it will actuate the reed switch contact
plastic stem, and the permanent magnet is point to create an open or close circuit. We can
sealed into the middle of the specified float apply such on-off output signals to reach liquid
ball(s). You can mount the float ball to penetrating level controlling and monitoring purpose.
through the stem, then the liquid buoyancy will The figures below show the float orientations on
deliver the float ball up and down at the specified N.O. (Normal Open) and N.C. (Normal Close).
position by graduating rings.
Float ball
Reed switch
NO NO
NC NC
Permanent
magnet
FEATURES
Multiple points measuring, multiple level points The housing protection is at least IP65.
could be for custom-made.
Rugged construction and multiple options for
Employing the magnet to actuate the reed switch materials from engineering plastics as PVDF,
requires no power. PP, PVC, and stainless steels such as SUS304,
Life expectancy of each contact can reach up to 2 SUS316, float switches can be applied to
million times. versatile applications in chemical corrosion
of acidity and alkalinity liquid, solvents or oil
All output signal wiring are simplified in same fuels.
junction box (housing) to economize the external
wiring construction. The reed switch and lead wire are isolated
with liquids absolutely. All stainless steel
FC(D) type magnetic float level switches are more
switches are applicable to high pressure and
cost-effective than other level switches in terms of
high temperature environment.
multiple points.
1
FlneTek
APPLICATIONS
Shipbuilding Industry, Generator Facilities, Petrochemical Industry, Food/Beverage Industry,
Waste Water/Water Purified Facilities, Electronic Industry, Dyeing and Finishing Industry,
Chemical Industry, Rubber/ Plastic Industry, Hydraulic.
SPECIFICATION
- 20°C~120°C
SUS316 10~ 30kg/cm2
(200°C Max.)
2
FlneTek
CHEMICAL RESISTANCE
3
FlneTek
Excellent Good Fair Corroded
Concentration Temp Plastic Rubber Stainless
Chemical
% BC PVC PP PVDF PTFE NBR 304 316
Citric Acid 10 40 104
C6H8O7 10 80 176
Gasoline 10 40 104
10 80 176
Diesel Fuels 40 104
80 176
Ethyl Alchol 40 104
Pure
C2H5OH 80 176
Formic Acid 90 40 104
HCOOH 80 176
Hydrofluric Dilute 40 104
Acid Dilute 80 176
HF 30 40 104
30 80 176
40 40 104
40 80 176
50 40 104
50 80 176
Hydrogen 5 40 104
peroxide 5 80 176
H2O2 20 40 104
20 80 176
30 40 104
30 80 176
50 40 104
50 80 176
90 40 104
90 80 176
Isopropyl Alcohol 40 104
(CH3)CHOH
Pure
80 176
Kerosene 40 104
80 176
Methyl Alcohol 40 104
CH3OH 80 176
Methyl Ethyl Ketone 40 104
CH3COC2H5 80 176
Potassium Chromate 40 104
K2CrO4 80 176
4
FlneTek
CONTACT PROTECTION CIRCUITS
INDUCTIVE LOADS
When using a reed switch with inductive Such high induced voltage (transients) may
loads such as motors, relays, solenoids, etc., cause damages to the reed switch or
The contact will be subjected to a high significantly reduce its life.
induced voltage during opening of the Therefore, protective circuits such as: RC
contact (load circuit). (snubber), varistors or clamping diodes are
recommended.(refer to Fig.1)
(Fig.1)
Inductive load
H
DC
C R
N
(RC)
DC DC
N
(Varistor) (Diode)
. It is prohibited to connect directly with any solenoid valve, motor or magnetic switch.
CAPACITIVE LOADS
When using a reed switch with capacitive Therefore, protective circuits such as:
loads such as capacitors, incandescent lamps surge suppressors or current limiting resistors
or long cables, the contact will be subjected to are recommended.(refer to Fig.2)
a high surge (inrush) current.
(Fig.2)
Capacitive load Bulb load
+
C R
AC AC
R
_
Parallel connection of RC circuit and switch will Series connection of resistance and switch limit
surge current bypass. surge current.
5
FlneTek
HOUSING SPECIFICATION
B 128
C 128 D
f118 f118 f113
1/2" NPT
108
107 107
1/2"PF 1/2"PF
E G H
88 85x80 f70
55
84
70
PG16 1/2"PF
1/2"PF
K Enclosure Explosion-proof
100
L Enclosure Explosion-proof M
80 f70
f90
80 1/2"NPT
100 1/2"NPT
3/4"NPT 80
3/4"NPT 1/2"NPT
Material : Aluminum Material : Aluminum
Enclosure : INERIS 09 ATEX 0049 Enclosure : INERIS 09 ATEX 0049 Material : SUS316
II 2GD Ex d IIC T4~T6 II 2GD Ex d IIC T4~T6 Enclosure : IP65
Terminals : 2~6 Terminals : 2~6 Terminals : 2~6
Max.Temp.: -20BC ~100BC Max.Temp.: -20BC ~90BC Max.Temp.: -20BC ~200BC
*For flow switch series. *For side-mounting float series.
6
FlneTek
FLOAT SPECIFICATIONS
C
S13 38x50x15 E>0.62 12 22.9 SUS 316L 200
A
F2 40x41.5x14 E>0.63 5 18.5 PP 80
It is requested the minimum interval for a single A= Minimum distance from the mounting
ball driving dual actuated positions (D) or position to the highest actuation level.
neighboring two balls (B), or from the bottom to B= Minimum distance between any two
the lowest ball interval (C) or from the mounting actuation levels.
position to the first ball (A), otherwise, there will
be some magnetic mutually interference involved C= Minimum distance from end of the lowest level.
by insufficient interval. To ensure the defined D= Minimum distance between two actuation levels
distance, please see the data below: by one float.
E= Screw length
FLOAT
TYPE S1 S2 S3 S4 S5 S6 P1 P2 P3 F4
A(mm) 25 32 40 39 50 70 23 27 47 55
B(mm) 50 64 82 78 99 136 44 55 85 98
C(mm) 25 32 40 39 50 70 23 31 43 50
D(mm) 30 40 55 50 65 70 30 30 45 65
(E) (mm) 14 16 19 22 22 25 28 32
8
FlneTek
THREAD /FLANG SIZE SELECTION
Float Thread size for Flange size for direct installation
Float type Material
dimensions direct installation SCH40S SCH80S
9
MODEL / NUMBER ORDER CODE COMPARISON TABLE
10
FlneTek
ORDER INFORMATION
05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
05 06 Model
00: Standard
01: Economy type
07 08 Certification
00: None
09 Type
A: Standard (Next page)
B: Side mounting type
C: Vertical adjustment type
D: Top mounting type
(Thread toward up/Without thread)
E: Side mounting type
(Thread toward up/Without thread)
10 Housing
0: Without housing
C: PP (Anti-acidity)
G: PC (Anti-acidity)
Connection
11 12 13 14 15 16
17 18 Probe diameter
1F: f8.0mm
2A: f12.7mm
2C: f16mm
2D: f17.2mm
11
FlneTek
05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
19 20 Material
14: PFA
18: PP
23: PVC
24: PVDF
21 22 Float
P1: 25*15*10 Q7: 25*25*8.8
P2: 25*25*10 F2: 42*44*14
P3: 48*45*18.5 F3: 45*45*20
P4: 20*25*10 F4: 48*62*18
23 Quantity of float
1: 1
2: 2
3: 3
4: 4
24 Contact type
A: SPST
B: SPDT
C: 1 foat 2 points(SPST)
25 26 27 28 Length
Code Probe Length
0100~3000 100~3000mm
0100~5900 100~5900mm
29 Buckle type
C: C buckle
A: Handmade car buckle
12
FlneTek
ANTI-CORROSION SCREW TYPE / FLANGE TYPE
Housing material apply by PP, wet portion material options in PP, PVDF, specially applicable for chemical
applications against corrosive environments.
1/2"PFx1 1/2"PFx1
130 130
2"PT 2"PT
NO 1 NO 1
NC mm NC mm
2
2 NO
NO
NC mm
NC mm
L=
mm NO 3
L= 3 NC mm
mm NO
NC mm
NO 4
NC mm
NO 4
NC mm 45
60
f17.2
Wetted Parts:PVDF f 48 Wetted Parts:PP
f16
f 48
1/2"PFx1 1/2"PFx1
145 145
Flange Flange
2"x10kg/cm2 2"x10kg/cm2
NO 1
NO 1
NC mm
NC mm
2
NO
2 NC mm
NO
NC mm
L= mm NO 3
L= 3
NC mm
mm NO
NC mm
NO 4
NC mm
NO 4
NC mm 45
60 f17.2
f 48
Wetted Parts:PVDF Wetted Parts:PP
f16
f 48
13
FlneTek
STANDARD FLANGE TYPE
The housing complies with the IP65 rating and can therefore be used in outdoor environment.
Type
FD B (EM) 3 S2 4 Type
FD B (FM) 4 S3 4
128 128
1/2"PFx2 1/2"PFx2
107 107
Flange Flange
1-1/2"x 5kg/cm2 2"x 5kg/cm2
NO 1 NO 1
NC mm NC mm
2
NO 2
NC mm NO
NC mm
3
L= NO
mm NC mm
NO 3
L=
mm NC mm
NO 4
NC mm
38 NO 4
NC mm
f9.5 55
f 41
f12.7
f 45
1/2"PFx2 1/2"PFx2
107 107
Flange Flange
2"x 5kg/cm2 3"x 5kg/cm2
NO 1
NC mm
NO 1
NC mm
2
NO
NC mm
2
NO
3 NC mm
L= NO
mm NC mm
NO 4
NC mm
NO 3
52 L= NC
mm mm
f12.7
f 52
NO 4
NC mm
108
f17.2
f 75
14
FlneTek
STANDARD SCREW TYPE
The housing complies with the IP65 rating and can therefore be used in outdoor environment.
Type
FD B (EQ) 3 S2 4 Type FD B (FQ) 4 S3 4
128 128
1/2"PFx2 1/2"PFx2
107 107
1-1/2"PT 2"PT
NO 1
NO 1
NC mm NC mm
2
NO
NC mm 2
NO
NC mm
3
L= NO
mm NC mm
L= NO 3
mm
NO 4 NC mm
NC mm
38
NO 4
NC mm
f9.5
f 41 55
f12.7
f 45
Type
FD B (FQ) 4 S4 4 Type
FD B (HQ) 7 S6 4
128 128
1/2"PFx2 1/2"PFx2
107 107
2"PT 3"PT
NO 1
NC mm
NO 1
NC mm
2
NO
NC mm
2
3 NO
L= NO
mm
mm NC mm
NC
NO 4
NC mm
52 NO 3
L= NC
mm mm
f12.7
f 52
NO 4
NC mm
108
f17.2
f 75
15
FlneTek
SCREW TYPE / FLANGE TYPE
The housing complies with the IP65 rating and can therefore be used in outdoor environment.
88 88
1/2"PFx1 1/2"PFx1
Flange Flange
1-1/2"x5kg/cm2 84 1-1/4"x5kg/cm2 84
NO 1
NO 1
NC mm
NC mm
2
NO
L= NC mm
mm
2
L= NO
3
mm NC mm NO
NC mm
NO 3 28
NC mm
f8
38
f28
f9.5
f 41
Type
FD E (EQ) 3 S2 3 Type
FD E (DQ) 1 S1 3
88 88
1/2"PFx1 1/2"PFx1
84 84
1-1/2"PT 1"PT
NO 1
NO 1
NC mm
NC mm
2
NO
L= NC mm
2 mm
L= NO
3
mm NC mm NO
NC mm
NO 3 28
NC mm
f8
38 f28
f9.5
f 41
16
FlneTek
INERIS 09 ATEX 0049 II 2GD Exd IIC T4~T6
IM2 ExdI ExtD A21
ENCLOSURE EXPLOSION PROOF IP66 T85~135BC
FLANGE TYPE
Type FD K (FQ) 4 S4 4
Type
FD K (FM) 4 S4 4 100
100 f90
f90
3/4"NPTx1
3/4"NPTx1
120
120 Flange
2"x5kg/cm2 2"PT
NO 1
NO 1 NC mm
NC mm
2 2
NO NO
NC mm NC mm
3 L= NO 3
L= NO mm
mm NC mm NC mm
4 NO 4
NO
NC mm NC mm
52 52
f12.7 f12.7
f52 f 52
3/4"NPTx1 3/4"NPTx1
NO 1
NC NO 1
mm
NC mm
2
NO
NC mm
2
NO
NC mm
NO 3
L= NC
mm mm
NO 3
L= NC
mm mm
NO 4
NC mm
NO 4
NC mm
108
108
f17.2
f 75
f17.2
f 75
17
FlneTek
VERTICAL ADJUSTMENT TYPE
FD E (EK) 3 S2 1
Connection Pipe Diameter Float Type
93
1/2"PFx1
EJ=1-1/2"PT 3=f9.5 S2=f41x38 84
6
FJ=2"PT 4=f12.7 S4=f52x52
EK=1-1/2"
3=f9.5 S2=f41x38
5kg/cm2
L= NO L1
mm NC mm
1-1/2"x5kg/cm2
8
90
38
f 9.5
f41
18
FlneTek
TEST ROD GL Marine Approval 50885-04HH
FUNCTION MATERIAL
When the Test Rod is attached to a magnetic float 1. Rod Connection: Bronze
level switch, user could test the performance of the 2. Compressed Spring: Stainless Steel
magnetic switch directly by pulling the handle of the 3. Positioning Clip: Stainless Steel
test rod on the top of the switch. 4. Test Rod Stem: Stainless Steel
FD......T
FDB-4000
HEX27 45
Connecting flange 1
Min. 3"x5kg/cm 2
2
f8
88
19
FlneTek
MARINE GRADE APPROVAL
FH DM 4 S3 1 FM FM 4 S3 1
f70 f70
1/2"NPTx1 1/2"NPTx1
70 70
200
2"x5kg/c㎡
L(Max. 2M)
L(Max. 2M)
C-C
FH DM 4 S3 1 0500 A FM DM 4 S3 1 0500 A
Contact Form Contact Form
A: SPST, C: SPDT A: SPST, C: SPDT
Length: mm Length: mm
0500: below 500mm 0500: below 500mm
1000: 501~1000mm 1000: 501~1000mm
1500: 1001~1500mm 1500: 1001~1500mm
Float quantity Float quantity
Float Type Float Type
Pipe diameter Pipe diameter
Connection Connection
* Please specify the , 2 , C-C and L while placing an order. DM=1"x 5kg/cm2 4= f12.7 S3= f45x55
(Length from lower end of housing to center line of float ball)
FM=2"x 5kg/cm2 4= f 12.7 S4= f52x52
* Special term for LR Marine approval: "Environmental test has been carried out but it is not applicable to use in the ship
and offshore that type of screw fittings is used for pipe exceeding 51mm outer diameter".
20
FlneTek
NEPSI PROOF No.GYJ111215 Ex d IIC T3~T6
PTB PROOF No. 05 ATEX 1027 II 2G Ex d IIB T6~T3 GB
II 2D Ex tb IIIC
EXPLOSION PROOF TYPE T85BC~T200BC Db IP65
FLANGE TYPE
Type
FD7 D FM 4 S4 4 Type FD7 D HM 7 S6 4 Type FD7 N HM 7 S6 4
f113 f113 f70
1/2"NPTx2 1/2"NPTx2
1/2"NPTx2
108 108
80
Flange Flange
2 3"x 5kg/cm
2 Flange
2"x 5kg/cm 3"x 5kg/cm
2
NO 1
NC mm
NO 1
NO 1
NC mm NC mm
2
NO
NC mm
2
NO 2
mm NO
3 NC
L= NO NC mm
mm NC mm
NO 4
NC mm
NO 3
L= NO 3
52 mm NC mm L=
mm NC mm
f12.7
f 45
NO 4
NO 4
NC mm
NC mm
108 108
f75 f75
1/2"NPTx2 1/2"NPTx2
1/2"NPTx2
108 108
80
2"PT 3"PT
3"PT
NO 1
NC mm
NO 1
NO 1
NC mm NC mm
2
NO
NC mm
2
3 NO 2
L= NO mm NO
mm NC mm
NC
NC mm
NO 4
NC mm
52 NO 3
3
L= NC L= NO
mm mm
mm NC mm
f12.7
f 45
NO 4
NO 4
NC mm
NC mm
108 108
f17.2 f17.2
f 75 f 75
21
FlneTek
MODEL / NUMBER ORDER CODE COMPARISON TABLE
22
FlneTek
ORDER INFORMATION
05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
05 06 Model
00: Standard(No housing)
01: Economy type(120B)
02: Hi-temperature type(200B)
10: Low-temperature type
07 08 Certification
00: None C0: ABS
1C: ATEX-Exd D0: GL
7C: NEPSI-Exd E0: BV
B0: DNV F0: LR (Next page)
09 Type
A: Standard
B: Side mounting type
C: Vertical adjustment type
D: Top mounting type
(Thread toward up/Without thread)
E: Side mounting type
(Thread toward up/Without thread)
F: Marine Grade Approval
(Top mounting type with protection tube)
G: Marine Grade Approval
(Side mounting type with chamber)
10 Housing
0: Without housing L: L type housing
B: B type housing N: N type housing
D: D type housing H: H type housing
E: :E type housing
K: K type housing
Connection
11 12 13 14 15 16
23
05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
17 18 Probe diameter
1F: f8.0mm 2A: f12.7mm
1G: f9.5mm 2D: f17.2mm
19 20 Material
MA: SUS 304
MB: SUS 316
MC: SUS 316L
21 22 Float
S1: 28*28*9.5 S5: 75*73*20 S8: 100*100*20
S2: 41*38*11 S6: 75*108*20 S10: 30*32*9.5
S3: 45*55*15 S7: 30*28*9.5 S11: 28*32*9.5
S4: 52*52*15
23 Quantity of float
1: 1
2: 2
3: 3
4: 4
24 Contact type
A: SPST C: 1 float 2 points(SPST)
B: SPDT D: 1 float 2 points(SPDT)
25 26 27 28 Length
Code Probe Length
0100~3000 100~3000mm
0100~5900 100~5900mm
29 Buckle type
C: C buckle
U: U buckle
A: Handmade car buckle
N.O. N.C. R2 R2
Supply
water HI LOW
N.O. LEVEL LEVEL
N.C.
AUTO SUPPLY CASE: R1
SINGLE FLOAT
DUAL SWITCHES R1 R2
N.O.
N.C. Stop Supply Solenoid
water valve
R2 R2
N.C. N.O.
LOW HI
LEVEL LEVEL
N.O.
AUTO DRAIN CASE: N.C. R1
SINGLE FLOAT
DUAL SWITCHES R1 R2
Drain N.O.
water N.C. Stop Drain Solenoid
water valve
Supply HI N.C. R1
water N.O. LEVEL
AUTO SUPPLY CASE: N.C.
DUAL FLOATS LOW N.C. R1
DUAL SWITCHES LEVEL
N.O. R1
N.C.
Supply / stop Solenoid
valve
HI N.O. R1 R1
LEVEL
N.O.
AUTO DRAIN CASE: N.C. LOW N.O.
DUAL FLOATS LEVEL
DUAL SWITCHES
N.O.
Drain
water N.C.
The "N.O." Means normally opened circuit of the reed switch (off) in lower liquid
level. As the float moves up to the specified higher level, the circuit closed (on).
The "N.C." Means normally closed circuit of the reed switch (on) in lower liquid
level. As the float moves up to the specified higher level, the circuit open (off).
25
FlneTek
INSTALLATION
26
FlneTek
CONNECTION DIAGRAMS
NO C NC
Means that the NC-C circuit will be close while liquid level lower than the float ball,
by mark of NC or B or ¯ ON.
NO C NC
Means that the NO-C circuit will be close while liquid level higher than the float ball,
by mark of NO or A or ON.
NO C NC
Means that the NO-C circuit will be close while liquid level higher than the float ball,
and NC-C circuit will be close while liquid level lower than the float ball.
Please screw the housing cap tightly and fix the conduit outlet, it will reinforce the housing
performance against the moisture and direct water. (f8mm multiple cord is recommended
for wiring)
If the end user is intended to adjust the actuation level position independently, please move
the float ball(s) position as well as the interior reed switches, otherwise, it will appear an
error or no signal.
27
FlneTek
Global Network
Germany
China
Taiwan U.S.
Singapore
Malaysia
Indonesia
Singapore
FineTek Pte Ltd. - Singapore Office
37 Kaki Bukit Place, Level 4 Singapore 416215
TEL: 65-6452-6340
EMAIL: info.sg@fine-tek.com
Indonesia
FineTek Co., Ltd. - Indonesia Office
Ruko Golden 8 Blok H No.38
Gading Serpong, Tangerang, Indonesia
TEL: 62 (021)-2923-1688
Distributor:
EMAIL: info.id@fine-tek.com
Malaysia
FineTek Co., Ltd. - Malaysia Office
8-05, Plaza Azalea, Persiaran Bandaraya,
Seksyen 14, 40000 Shah Alam, Selangor, Malaysia
TEL: 603-5524-7168
EMAIL: info.my@fine-tek.com
08-FDXEP-021319