Professional Documents
Culture Documents
Stuck pipe- Causes and different Schedule: 20th April to 22nd April 2021
Mechanisms, Stuck mechanism (Tuesday to Thursday)
identification, Detailed discussion Two sessions of three hours daily.
on sticking mechanisms - Timings: Session 1: 10:00 hrs. to 13:00 hrs.
Differential, Geometrical and hole
pack off /bridging, Drilling Jars, Session 2: 14:00 hrs. to 17:00 hrs.
Wellbore instability and shale Faculty: - Drilling Technology School, IDT (Internal)
problems, Important Drilling fluid
Course Type: Online
related factors to avoid pipe
sticking, Hole cleaning, General Who may attend: E1 to E6 level Executives, fresh GTs and non-
guidelines to avoid pipe sticking, executives directly associated with Drilling operations from Drilling
CASE STUDIES services (Drilling, Cementing, and Chemistry)
TEAM EXERCISES
1. All HDSs are requested to nominate suitable candidates to attend the course.
2. On receiving the nomination, course link for participating in the training program along with other IDT
documents will be sent to the individual’s e-mail.
3. IDT training certificate will be issued to the participants after attending all the sessions and on
submission of all the required documents (online).
4. For any further queries regarding nomination, please contact, Mr. Ram Kumar, GM (D), CPF No 60238
or Mr. A. Bora, GM (D), CPF No 81571.
5. Candidates must use PC/Laptop with webcam and microphone. Use of smartphone for the same is
not allowed.