Professional Documents
Culture Documents
Códigos Control Remoto SONY
Códigos Control Remoto SONY
3-276-523-11(1) Operating a DVR (Digital video recorder) Operating a digital satellite receiver Operating a DVD Home Theater
Setting the Code Searching for the Correct Code Remote Button Descriptions Component code numbers / DVR (Digital Video Recorder)/
2 To change the input mode. ws D: (*Live TV) 2 To switch the output of the wa N: To play. 2 To change the input mode. wa N: To play.
Follow the steps 1 and 2 below for each component you plan to use DVR (Videograbadora digital)
Remote Commander RM-V210 with the Commander.
You can find a code number available for a
component that doesn’t have one in the
supplied “Component code numbers.”
SET POWER
1
3 SET indicator
General
3 and qd
To change the channel.
For example, to change to
To bring up Master Guide.
A: (*REPLAY)
To replay.
digital satellite receiver to the
TV. (When you connect a TV
cable or antenna to the receiver,
m:
M:
zREC:
To rewind.
To fast-forward.
To record, press N
3 and qd
Number buttons: To set items
selected on the screen.
m:
M:
zREC:
To rewind.
To fast-forward.
To record, press N
Números de código de componentes
English Tivo ReplayTV
TV VCR CBL DVD
2 Brand Code No. Code No.
Step 1: Entering the Code Number SET POWER
1 To set up the Commander, channel 5, press 0 and 5 (or, Or to go into REC/REVIEW the output switches between a while pressing zREC. 4 To select numbers 10 and while pressing zREC. DVR (digital video recorder), SAT (digital satellite receiver),
Operating Instructions 2
Before starting the Search function 1
4
2
5
3
6
TV VCR CBL DVD
press SET more than two press 5 and ENTER). mode during play. (After about TV and SAT program.) x: To stop. above. x: To stop. Cable box, TV, DVD Home Theater, DVD and VCR
Sony
Humax
3201, 3205, 3206
3202, 0413
—
—
1 See the supplied “Component code Set each component to the following status so 1 2 3 8 To turn on the display. 5-second rewind, replay 3, 4 and qd X: To pause. 6 VOL+: AMP volume up X: To pause. The following tables show brand names and their corresponding code numbers.
Manual de instrucciones (parte posterior) numbers”, and find the four-digit code
SET POWER
that the Search function works effectively. 7 8 9 4 5 6 seconds.
9 To bring up Master Guide. begins.) To change the channel. For .: To proceed to the VOL–: AMP volume down .: To proceed to the
Panasonic — 3203
TV VCR CBL DVD
3 TV, DVD Home Theater: Power-on
0 ENTER
4 7 8 9 6 Volume up: + Español Philips 3202, 0412 —
number for the desired component. VOL
INPUT
CH
q; To clear the setting. wd PAGE+ : (*THUMBS+) example, to change to channel previous location. 7 AMP volume muting previous location. Pioneer 0413 —
© 2007 Sony Corporation Printed in China 1 2 3
Other components: Power-off 0 ENTER
Volume down: – To exit the setting menu. To select the desired recorded
If more than one code number is listed, use 4
PIP
3
VOL CH 5, press 0 and 5 (or press 5 and >: To proceed to the next 8 To show the current play status >: To proceed to the next DVR (Videograbadora digital), SAT (Sintonizador de recepción vía satélite ReplayTV — 3203, 3204
4 5 6 INPUT
7 To mute the volume on a TV qg CH+: Channel up . program. digital), adaptador para cablevisión, Televisor, Sistema de cine doméstico en
the number that’s listed first. 7 8 9 * If any of these components are assigned to any
SLEEP
ENTER). location. on the screen. location. Tivo 3201, 3202 —
PIP
or a DVD Home Theater. (*PAGE+) Page up. (It is necessary to have DVD, DVD (reproductor de discos DVD) y Videograbadora
For example, if you’re setting up a Sony 0 ENTER
5 of the Component Select buttons, you can set a
INFO
8 To turn on the display. : Replay 9 To change the sound. : To operate “ Flash –.” Toshiba 0413 —
qa To turn on and off the power
SLEEP
MUTING RECALL
VOL CH
CH–: Channel down. recorded the desired program.) Las tablas que se presentan a continuación muestran las marcas y los números de código
TV, you would use the code number 8201. INPUT
component code using the Search function. INFO 9 To bring up the Master Guide. : Advance q; To return to the previous : To operate “ Flash +.”
MUTING RECALL of the selected component. (*PAGE–) Page down. PAGE– : (*THUMBS–)
correspondientes.
English If your component isn’t listed, see
PIP
A B C D
qs Component select buttons.
q; To exit the mode. ws A: RED button screen. ws B: open/ close
SLEEP 1 Press SET more than two seconds. The SET indicator lights up. PAGE qh To operate JUMP or To select the desired recorded qf To call up the DISH menu. B: GREEN button qf To switch the subtitle. A: To call up the setup menu.
“Searching for the Correct Code.” GUIDE MENU
Press to select a component to To set a Component Code (see the instruction manual for details) Cable box/Adaptadores para cablevisión
INFO
CHANNEL RETURN program. qg Channel up: + C: YELLOW button qg CH+: Tuner + C: Disc skip
Installing the Batteries
MUTING RECALL
2 Press the Component Select button for the desired component. operate. Para introducir un código de componente (consulte los detalles en el manual
For the customers in the U.S.A. qj To call up “Tivo” menu. (It is necessary to have
LIST FAV
• Do not mix old batteries with new ones or mix different types of to check if that button works.
Operating a Component 5, press 0 and 5 (or press 5 and
ENTER). D: VIDEO 4
(for example, to change to zREC: To record, press N
qg CH+: Channel up. location.
Toshiba 3006 — — Pioneer
Pulsar
3107, 9014, 9015
3106
channel 5, press 0 and 5, or while pressing zREC. Usdigital — — 3401
About Presetting the Commander batteries together. .: VIDEO 5 CH–: Channel down. : To operate “ Flash –.”
The Commander is preset at the factory to operate Sony brand • If the electrolyte inside the battery should leak, wipe the
For example, press the POWER button to see if it works on your
component . 1 Press the button of the desired component on the Commander.
8 To display the current channel
on TV. : VIDEO 6
press 5 and ENTER). x: To stop.
qh To select a deck. : To operate “ Flash +.” Troubleshooting Regal
Rodgers
9022, 9023, 9024, 9025, 9026
3107
8 To turn on the display. X: To pause.
components. contaminated area of the battery compartment with a cloth and 9 To bring up Master Guide. : VIDEO 7 qj To switch the subtitle. ws B: open/ close If you have problems setting up or using the Commander: Runco 3106
3 Check that the other buttons of the Commander is operating the TV VCR CBL DVD 9 To switch the EPG display to .: To proceed to the
If you’re using the Commander with a Sony component, you won’t replace the old batteries with new ones. To prevent the electrolyte q; To exit the menu. >: VIDEO 8 qk To display the DVD menu. D: To display the Top Menu. • When setting up the Commander, carefully go through the procedures DVD Scientific Atlanta 3102, 3107, 3108, 3109, 9009, 9010, 9045, 9046
on/off. previous location.
need to preset the Commander before you start using it. corresponding functions of the component. qf To operate the Picture-in- m: HDMI select A: To call up the setup menu. described in “Setting the Code.” If the code that’s listed first for your Seren 3107
from leaking, remove the batteries when you plan not to use the q; To exit the setting menu. >: To proceed to the next
2 Point the Commander directly at the component. Picture function. N: HDMI 1 wd PAGE+: To select DVD deck. component doesn’t work, try all the codes for your component - in the order Brand Code No. Sigecom 3107
To set up the Commander to use with other (non-Sony) Commander for a long period of time. qg CH+: Channel up. location. Susquehanna 3107
qg CH+: Channel up. M: HDMI 2 PAGE-: To select HDD deck. in which they’re listed. If all the codes fail to work (or if your component is Sony 0201, 0202, 0203, 0024, 0030, 0211
manufacturers’ components, or to use with a component that is not You can write down the code number on the label inside the 3 Press the button for the function you want to use. CH–: Channel down. ws A: To operate “A” button. Time Warner 3107
CH–: Channel down. zREC: Component video wf To display the title menu. not listed in this manual), try using the procedures in “Searching for the Advent 0048
preset at the factory, you’ll need to follow the instructions in this battery compartment lid. qh To toggle the current /previous B: To operate “B” button. Tocom 9016, 9017, 9043
See “Remote Button Descriptions” for complete descriptions of the qh To operate JUMP, FLASHBACK connection select Correct Code.” Aiwa 0015
manual to preset the Commander with the correct code number for channel. C: To operate “C” button. • Check that you’re aiming the Commander directly at the component, and that Apex 0047 Toshiba 3106
buttons on the Commander. or CHANNEL RETURN function x: Component video
qk To call up the MENU display. wd PAGE+: Page up.
your components. (See the supplied “Component Code Numbers” If the Commander Doesn’t Seem to Be Working... connection 1 there are no obstructions between the Commander and the component. Broksonic 0214 Videotron 3107
on the TV. ql To move the cursor upward, PAGE-: Page down. Wideopenwest 3105, 3107
also). • First, try repeating these setup procedures using the other codes Notes on Using the Remote Commander qj To operate SLEEP function on X: Component video • Make sure the batteries you’re using are not worn out, and that they’re Cyber Home 0034, 0035, 0226
Basically, use this Commander in the same way as the Commanders downward, to the left, to the wf To call up the title of the inserted correctly. Daewoo 0029 Zenith 3105, 3106, 9013
listed for your component (see the supplied “Component Code the TV. connection 2 recorded program.
supplied with your components. right, or to enter the selection. • Check that the button of the TV, VCR, CBL, or DVD is pressed to choose your Denon 0002, 0017, 0205
Component that can be preset Button Factory setting Numbers”). qk To call up the MENU display. wg To use the “FAVORITE” wg To use the “FAVORITE” desired component. Emerson 0040, 0228
• If – after trying all the codes listed for your component – you still • Using this Commander will not increase the functions of your ql To move the cursor upward, function.
TV TV Sony TV function. • Check that the component has infrared remote capability. For example, if Funai 0220
cannot get the Commander to work properly, try the search components. The functions of the Commander are limited to the downward, to the left, to the your component didn’t come with a remote commander, it probably isn’t GO VIDEO 0042, 0212, 0233 DVD Home Theater (DVD/Receiver combo)/
VCR/Cable box/Digital satellite VCR Sony VHS VCR method described in “Searching for the Correct Code.” functions of the components themselves. For example, if your TV right, or to enter the selection.
receiver/DVD/TV/Digital video does not have a MUTING function, MUTING on this Commander
capable of being controlled by a remote commander. Gpx 0046, 0049 Sistema de cine doméstico en DVD
CBL Sony Cable box Notes • Should any problem persist, reset the Commander to the factory setting by Humax 0232
recorder/DVD Home Theater will not function with your TV. • There may be cases you may turn on/off the cable box by pressing CH+ or pressing the POWER, INPUT and VOL– buttons simultaneously. ILO 0227, 0230 (combo de receptor de DVD)
DVD Sony DVD player • Some functions of the component may not work with this Insignia 0042, 0215
Operating a VCR CH– on the Commander. Brand Code No.
Notes
Commander.
2 To change the input mode.
• If your cable box can control volume, be sure to set its volume control to a For the customers in the U.S.A. JVC
Kenwood
0007, 0208
0050, 0051 Sony 4501, 4502, 4503, 4504, 4505
• If your cable box can control volume, be sure to set its volume medium position. If the volume on the cable box is turned down completely,
• The Commander can be set up to operate only one component per 8 To expose the on-screen you will not be able to adjust your TV’s volume with the Commander. Customer Support Information LG 0218 Bose 4512
switch to a medium position. If the volume on the cable box is display. Insignia 4515
button – unless their code numbers happen to be the same. For If – after you’ve read through this manual – you still cannot get the Magnavox 0225
turned down completely, you will not be able to adjust your TV’s qf To switch the antenna output. Marantz 0012 JVC 4507
example, you cannot set up the Commander to operate a Sony TV Remote Commander to work properly, call the Sony Customer
volume with the Commander. qg CH+: Channel up Panasonic 0205, 0213, 0002 LG 4514, 4516
and a Panasonic TV simultaneously (because they use different Support Helpline at 1-800-822-2217. Nexxtech 4515
CH–: Channel down Philips 0012, 0221, 0231
code numbers). Pioneer 0004, 0019, 0021, 0204 Onkyo 4509
• You may not be able to operate even a Sony brand component with qh To select a deck. Panasonic 4506
wa N: To play. Samsung 0014, 0212, 0229
the factory presetting. In such a case, follow the procedure in Sansui 0214 Sharp 4510
x: To stop.
“Setting the Code.” Sharp 0219 Yamaha 4511
m: To rewind. Zenith 4513
Sylvania 0215, 0220
M: To fast-forward. Symphonic 0040, 0041
zREC: To record, press N Terapin 0036
while pressing zREC. Toshiba 0209
X: To pause. Yamaha 0205
Zenith 0218
Español Paso 2: Comprobación del funcionamiento de un Control de un DVR (Videograbadora digital) Control de un sintonizador de recepción vía satélite digital Control de un Sistema de cine doméstico en DVD
TV/Televisores VCR/Videograbadoras Colocación de las pilas Control de un componente Descripción de las botones del control
número de código 2 Para cambiar el modo de ws D: (*Live TV) 2 Para cambiar la salida del w; Para visualizar el índice de 2 Para cambiar el modo de qk Para visualizar el menú.
Brand Code No. Brand Code No. Antes de reemplazar las pilas, tenga unas nuevas preparadas.
Sony 8201 Sony (VTR1:Betamax) 1001 Para los clientes de EE. UU. 1 Conecte la alimentación del componente que desee ajustar. 1 Presione la botón correspondiente al componente deseado del
remoto entrada. Para abrir la Guía maestra sintonizador de recepción vía emisoras. entrada.
3 y qd
ql Para mover el cursor hacia
arriba, hacia abajo, hacia la
Deslice y abra el compartimiento de las pilas, e inserte dos pilas de 3 y qd A: (*REPLAY) satélite digital al televisor wa N: para iniciar.
Admiral 8014, 8104, 8121 Sony (VTR2:8mm) 1002
tamaño AA (R6) (no suministradas). 2 Apunte con el control remoto hacia el componente y presione una control remoto. Indicador SET General Para cambiar de canal. Por Para repetir la reproducción. O (cuando conecte un cable de m: para rebobinar. Botones numéricos: para ajustar izquierda o hacia la derecha, o
Advent
Aiwa
8123, 8133
8115
Sony(VTR3:VHS)
Sony(VTR4:DV)
1003
1004
ADVERTENCIA Cerciórese de alinear + y – de las pilas con + y – del compartimiento botón para comprobar si trabaja. SET POWER
1 Para configurar control ejemplo, para cambiar al canal bien, presiónelo para entrar en televisor o una antena al M: para avanzar elementos seleccionados en la para introducir la selección.
A Mark 8104 Sony(VTR5:DV) 1005 Este equipo ha sido probado y se ha encontrado que cumple con los de las mismas. Por ejemplo, presione la botón POWER para ver si trabaja en su TV VCR CBL DVD
TV VCR CBL DVD
remoto, presione el botón SET 5, presione 0 y 5 (o bien el modo REC/REVIEW sintonizador de recepción, la rápidamente. pantalla. w; Para abrir el menú AMP.
Anam 8104 Sony(VTR6:DV) 1006 límites para dispositivos digitales de Clase B, de acuerdo con la Parte componente. 1 2 3 durante más de dos segundos. presione 5 y ENTER). (grabación/revisión) durante la salida cambia entre un zREC: para grabar; presione 4 Para seleccionar el número 10 y wa N: para iniciar.
2 Apunte con el control remoto directamente hacia el componente.
Aoc 8104 Admiral 1030 15 de las normas de la FCC. Estos límites han sido diseñados para 1 2 3 Compruebe si las otras botones del control remoto controlan las
4 5 6 6 Para aumentar el volumen: + 8 Para encender la pantalla.
9 Para abrir la Guía maestra.
reproducción (la repetición
comienza después de rebobinar
programa de televisión y uno
de emisión satélite).
N mientras mantiene
presionado zREC.
números superiores.
6 VOL+: para subir el volumen
m: para rebobinar.
M: para avanzar
Apex 8117, 8130 Aiwa 1035, 1050 proporcionar una protección razonable contra interferencias 3 Presione la botón correspondiente a la función que desee utilizar. 7 8 9 Para reducir el volumen: –
Archer 8104 Audio Dynamic 1017, 1040 funciones correspondientes del componente. q; Para borrar el ajuste. Presiónelo durante unos 5 segundos). 3, 4 y qd x: para detener. del amplificador. rápidamente.
perjudiciales en una instalación residencial. Este equipo genera, 0 ENTER
7 Para silenciar el volumen del
Audiovox 8104, 8124 Broksonic 1017, 1020, 1022, 1066 Con respecto a la descripción completa de las botones del control VOL
INPUT
CH
para salir del menú de ajustes. wd PAGE+ : (*THUMBS+) Para cambiar de canal. Por X: para insertar una pausa. VOL–: para bajar el volumen zREC: para grabar; presione
utiliza, y puede radiar energía de radiofrecuencia y, si no se instala y televisor o Sistema de cine
Bell & Howell 8014 Canon 1011 Usted podrá escribir el número de código en la etiqueta del remoto, consulte “Descripción de las botones del control remoto.” PIP
qg CH+: para cambiar al canal Para seleccionar el programa ejemplo, para cambiar al canal .: para ir a la ubicación del amplificador. N mientras mantiene
utiliza de acuerdo con las instrucciones, puede causar interferencias doméstico en DVD.
Broksonic 8104 Citizen 1035 interior de la tapa del compartimiento de la batería. SLEEP
qa Para conectar y desconectar la siguiente. grabado que desee 5, presione 0 y 5 (o bien anterior. 7 Para silenciar el volumen del presionado zREC.
perjudiciales en las radiocomunicaciones. Sin embargo, no existe Notas sobre la utilización del control remoto
Craig 8020, 8023 Craig 1035 MUTING
INFO
RECALL
alimentación del componente (*PAGE+) Para ir a la página (es necesario haber grabado el presione 5 y ENTER). >: para ir a la siguiente amplificador. x: para detener.
Crown 8023 Curtis Mathis 1007 ninguna garantía de que tales interferencias no se produzcan en una Básicamente, utilice este control remoto de la misma forma que el 8 Para mostrar en pantalla el X: para insertar una pausa.
Si el control remoto parece que no trabaja... A B C D
seleccionado. anterior. programa deseado). 8 Para encender la pantalla. ubicación.
Ctx 8104 Daewoo 1015, 1064 instalación particular. Si este equipo causa interferencias suministrado con sus componentes. PAGE
CH–: presiónelo para cambiar PAGE– : (*THUMBS–) 9 Para abrir la Guía maestra. : para repetir. estado actual de la .: para ir a la ubicación
• En primer lugar, repita estos procedimientos de programación GUIDE MENU
qs Botones selectores de
Curtis Mathis 8023 DBX 1017, 1040 perjudiciales, lo que podrá determinarse desconectando y volviendo Cuándo reemplazar las pilas • La utilización de este control remoto no aumentará las funciones de al canal anterior. Para seleccionar el programa q; Para salir del modo. : para avanzar. reproducción. anterior.
utilizando los otros códigos de la lista para su componente LIST FAV
componentes. Presiónelos para
Daewoo 8035, 8119 Dimensia 1007 a conectar su alimentación, se ruega que el usuario corrija las En condiciones normales, las pilas durarán hasta un año. Si el sus componentes. Las funciones del control remoto estarán OK
(*PAGE–) Para ir a la página grabado que desee qf Para abrir el menú DISH. ws A: botón rojo 9 Para cambiar el sonido. >: para ir a la siguiente
Durabrand 8080, 8081, 8092 Emerson 1019, 1020, 1021, 1022 (consulte las tablas de “Números de código de componentes”). utilizar un componente.
interferencias tomando una o más de las medidas siguientes: control remoto no funciona adecuadamente, es posible que las pilas limitadas a las de los propios componentes. Por ejemplo, si su EXIT TOOLS
siguiente. (es necesario haber grabado el qg Para cambiar de canal. B: botón verde q; Para regresar a la pantalla ubicación.
Emerson 8015, 8020, 8023, 8039, 8042, 8074, 8083, 8118, 8112 General Electric 1007, 1062 • Si, después de haber probado todos los códigos de la lista para su
• Reorientación o reubicación de la antena receptora. estén agotadas. Reemplace las pilas por otras nuevas. televisor no posee función de silenciamiento (MUTING), la botón qh Para utilizar las funciones programa deseado). Para ir al canal siguiente C: botón amarillo anterior. : para disminuir el flash.
Emprex 8217 GO VIDEO 1042, 1051, 1078, 1080 componente, el control remoto sigue sin trabajar adecuadamente,
• Aumento de la separación entre el equipo y el receptor. MUTING de este control remoto no trabajará con su televisor. JUMP o CHANNEL RETURN wf (*LIST) presione + D: botón azul qf Para cambiar los subtítulos. : para aumentar el flash.
ESA 8083, 8097 GoldStar 1035 consulte el método de búsqueda descrito en “Búsqueda del código
General Electric 8107, 8108, 8018, 8045, 8049 Hitachi 1007, 1008, 1011 • Conexión del equipo a un tomacorriente diferente del utilizado por Notas • Algunas funciones del componente pueden no trabajar con este qj Para visualizar el menú “Tivo”. Para visualizar el título del Para ir al canal anterior wd PAGE+: para ir a la página qg CH+: para cambiar al ws B: para abrir/cerrar
correcto.” siguiente canal del A: para visualizar el menú de
GoldStar 8030, 8049, 8104, 8006, 8028 HQ 1015 el receptor. • Reemplace ambas pilas por otras nuevas. control remoto. qk Para abrir la pantalla MENU. programa grabado. presione – anterior.
Haier 8117, 8081 Insignia 1078 • Solicitud de ayuda al proveedor o a un técnico de radio/televisión • No tarde más de 3 minutos en reemplazar las pilas, porque de lo • Si su adaptador para cablevisión puede controlar el volumen, ql Para mover el cursor hacia qh Para sintonizar la última PAGE-: para ir a la página sintonizador. ajustes.
Hitachi 8031, 8108, 8112, 8113 Instant Replay 1011 experimentado. contrario su ajuste de números de código se borrará. cerciórese de ajustar su selector de volumen a una posición arriba, hacia abajo, hacia la emisora recibida. siguiente. CH–: para cambiar al canal C: para omitir un disco
Hp 8219, 8128 JC Penny 1007, 1008, 1017, 1040 Tenga en cuenta que cualquier cambio o modificación no
Búsqueda del código correcto intermedia. Si redujese completamente el volumen del adaptador izquierda o hacia la derecha, o qj Para abrir el menú PVR. wf Para visualizar el título del anterior del D: para visualizar el menú
ILO 8213, 8216, 8083, 8103 JVC 1017, 1040, 1047 expresamente aprobado en este manual puede anular su autoridad Notas sobre las pilas para cablevisión, no podría ajustar el volumen de su televisor con para introducir la selección. qk Para abrir la pantalla MENU. programa grabado. sintonizador. principal.
Insignia 8213, 8083, 8092, 8101, 8102 Kenwood 1017, 1035, 1040 Podrá buscar un número de código disponible Acerca de los puntos táctiles wa N: para iniciar. ql Para mover el cursor hacia wg Para utilizar la función wg Para visualizar la pantalla
para utilizar este equipo. • No mezcle una pila nueva con otra vieja, ni dos de tipos diferentes. 1 el control remoto.
JC Penny 8104, 8107, 8108, 8030 LG 1035 para un componente que no lo posea en las Los botones número 5, N y CH+ disponen de un punto táctil que facilita su m: para rebobinar. arriba, hacia abajo, hacia la “FAVORITE”. MEMORY.
JVC 8208, 8028 LXI(Sears) 1008, 1035 • Si se fuga el electrólito de las pilas, limpie la parte contaminada del tablas “Números de código de componentes”
SET POWER
3
utilización. M: para avanzar izquierda o hacia la derecha, o
Konka 8116, 8127 Magnavox 1011, 1063 compartimiento de las pilas con un paño y reemplace las pilas TV VCR CBL DVD
2
suministradas. 1 2 3
rápidamente. para introducir la selección.
KTV 8023 Marantz 1017, 1040
Preparación del control remoto viejas por otras nuevas. Para evitar la fuga del electrólito, extraiga
Antes de iniciar la función de búsqueda 4 5 6 Nota sobre los botones VOL +/- y MUTING zREC: para grabar; presione
LG
LXI(Sears)
8030, 8049, 8104
8052
Marta
MGA
1035
1027, 1059
las pilas cuando no vaya a utilizar el control remoto durante
SAjuste cada componente en el estado siguiente 7 8 9 El control remoto permite controlar o silenciar el volumen del televisor cuando N mientras mantiene Especificaciones
Sobre el preajuste del control remoto mucho tiempo. 0 ENTER
4 se selecciona un componente de video. El control remoto emite señales para presionado zREC.
Magnavox 8207, 8220, 8018, 8043, 8088, 8103, 8111, 8121, 8125 Minolta 1007, 1008
El control remoto ha sido preajustado en fábrica para gobernar para que la función de búsqueda resulte VOL CH
controlar el volumen o silenciar el sonido de un televisor o un sistema de cine x: para detener.
Control de un DVD
Maxent 8218 Mitsubishi 1027, 1059
INPUT
Alcance de control Aprox. 7 m (23 ft) (puede variar dependiendo del
componentes de marca Sony. efectiva. PIP doméstico en DVD cuando se ajusta uno de estos componentes. X: para insertar una pausa. 2 Para cambiar el modo de w; Para visualizar el menú componente de cada fabricante)
Megatron 8104 Multitech 1024 3
Memorex 8080 NEC 1017, 1040 Si va a utilizar el control remoto con componentes Sony, no Programación del código Televisor, Sistema de cine doméstico en DVD: SLEEP
.: para ir a la ubicación entrada. “TOOLS”. Alimentación Dos de tamaño AA (R6) (no suministradas)
MGA 8066 Olympic 1011 necesitará preajustarlo antes de comenzar a utilizarlo. encendidos INFO
anterior. 3 y qd wa N: para iniciar. Duración de las pilas Aprox. 1 año (puede variar dependiendo de la
Realice los pasos 1 y 2 siguientes para cada componente que planee MUTING RECALL
opciones. estado actual de la x: para detener. losque la legislación la impone, especialmente los países de la EEE
Philco 8031, 8035 Quasar 1006, 1009, 1011 número de código de cuatro cifras que 3 SET se ilumina. 5, presione 0 y 5 (o bien
TV VCR CBL DVD
wa Para seleccionar la fuente de reproducción. X: para insertar una pausa. (Espacio Económico Europeo).
Philips 8207, 8043, 8056, 8108, 8121 RCA 1007, 1008, 1011, 1015, 1063 Componente que puede Botón Ajuste de fábrica corresponde al componente deseado. presione 5 y ENTER).
1 2 3
entrada del televisor. 9 Para abrir la Guía maestra. .: para ir a la ubicación
Pioneer 8210, 8018, 8037 Realistic 1027 preajustarse Si hay más de un número de código en la 4 5 6 4 2 Presione el botón selector de componente del componente que 8 Para visualizar el canal actual
ws A: VIDEO 1 Control de un adaptador para cablevisión q; Para regresar a la pantalla anterior.
Polaroid 8214, 8124 Samsung 1024, 1025 lista, utilice el primero de ellos. 7 8 9 desee. El indicador SET se ilumina. en el televisor
anterior. >: para ir a la siguiente
TV TV Sony TV 5 B: VIDEO 2
Princeton 8104 Sansui 1017, 1066 Por ejemplo, si está configurando un 0 ENTER 9 Para abrir la Guía maestra. 2 Para cambiar el modo de wa N: para iniciar.
3 Presione CH + o CH – y POWER hasta que el componente C: VIDEO 3 qd Para introducir un ajuste. Para ubicación.
Solución de problemas
VOL CH
Proscan 8006, 8045, 8053, 8089 Sanyo 1035, 1064 Videograbadora/Adaptador para VCR Videograbadora VHS televisor Sony, utilizará el número de
INPUT
q; Para salir del menú. entrada. m: para rebobinar.
reaccione de la forma siguiente: D: VIDEO 4 ajustar elementos seleccionados : para disminuir el flash.
Proton 8104 Scott 1015, 1024, 1027 cablevisión/Sintonizador de Sony PIP
qf Para utilizar la función de 3, 4 y qd M: para avanzar
código 8201. .: VIDEO 5 de la pantalla. : para aumentar el flash.
Protron 8142 LXI(Sears) 1008, 1035 recepción vía satélite digital/DVD/ SLEEP
imagen en imagen. Para cambiar de canal (por rápidamente. Si tiene problemas al programar o utilizar el control remoto:
Quasar 8018 Sensory Science 1025 CBL Adaptador para Si el componente no está en la lista, Televisor, Sistema de cine doméstico en DVD: apagados : VIDEO 6 qf Para cambiar los subtítulos. ws B: para abrir/cerrar
qg CH+: para cambiar al canal
INFO