You are on page 1of 1

REPUBLIC OF THE PHILIPPINES

CAMARINES NORTE STATE COLLEGE


CNSC ONE! F. Pimentel Avenue, Brgy 2, Daet, Camarines Norte
ONwards to Excellence!
College of Engineering

Name:____________________________________ Course/Year/Section: ______________Score:____________________

TECHNICAL ELECTIVE 3 – Problem Solving


1st Semester 2020-2021
Problem: Solve and Compare the maximum stress in a six (6) meter simply supported reinforced concrete beam 300mmx
600mm and carrying a total load of w = (10+N)kN/m to a pre-stressed concrete beam with the same section, span and load w =
(10+N)kN/m The pre-stressing force P = (50*N)kN is applied on the beam with straight profile and is located as shown in case b
and c. Show your solution on a separate sheet of clean paper.

Stress in Stress in
Top Bottom
Fibers, Fibers,
MPa MPa
At At
midspan midspan
a.

Reinforced concrete beam

b.

Pre-stressed concrete beam

c.

Subject: Technical Elective 3:Prestressed Concrete Design Instructor: Engr. Francis V. Villacorta

You might also like