The document contains data from experiments measuring the flow rate (Q), pressure (P), force (F), and other variables (Z1, Z2) for different RPM settings of four gate valves. For each valve, the measurements were taken at RPM settings ranging from 1000 to 1500 in increments of 100. The data shows that increasing the RPM generally resulted in higher flow rates and lower pressures and forces across the four valves.
The document contains data from experiments measuring the flow rate (Q), pressure (P), force (F), and other variables (Z1, Z2) for different RPM settings of four gate valves. For each valve, the measurements were taken at RPM settings ranging from 1000 to 1500 in increments of 100. The data shows that increasing the RPM generally resulted in higher flow rates and lower pressures and forces across the four valves.
The document contains data from experiments measuring the flow rate (Q), pressure (P), force (F), and other variables (Z1, Z2) for different RPM settings of four gate valves. For each valve, the measurements were taken at RPM settings ranging from 1000 to 1500 in increments of 100. The data shows that increasing the RPM generally resulted in higher flow rates and lower pressures and forces across the four valves.