Professional Documents
Culture Documents
Figure HI1051-1
Table HI1051-1 Solenoid specifications
HI250
HI1051 Hyundai Reference
Figure HI1051-2
HI251
HI1051 Hyundai Reference
HI252
HI1051 Hyundai Reference
HI253
HI1051 Hyundai Reference
F21
The F21 transmission is used on Varacruz models, solenoid locations are shown in
Figure HI1051-8.
TB-60N, TB-65N
Solenoid locations are shown in Figure HI1051-9.
6HP26
The 6HP26 transmission is used on Equus, Genesis, Santa Fe, and Tucson models.
HI254
HI1051 Hyundai Reference
HI255
HI1051 Hyundai Reference
HI256
HI1051 Hyundai Reference
A5HFI
The A5HFI transmission is used on Enoutrage models.
The A5HFI uses a variable forced solenoid (VFS) that operates on a high-frequency (600Hz)
duty cycle to precisely control the opening of a spool valve. The VFS controls the amount of
oil flow by regulating how far the spool valve moves to open the passage. The transmission
control module (TCM) monitors the feedback signal of the VFS, and sets a diagnostic trouble
code (DTC) if the signal is out of range. On an oscilloscope a good VFS produces a square
waveform patern with variable frequency.
1 2 3 4 5 6 7
1— OD solenoid
2— L&R solenoid
3— 5A/T solenoid
4— VFS
5— UD solenoid
6— 2ND solenoid
7— DCCSV solenoid
Figure HI1051-13 A5HFI valve body
HI257
HI1051 Hyundai Reference
HI258
HI1051 Hyundai Reference
A6MFI
The A5HFI transmission is used on Sante Fe and Tucson models
HI259