Professional Documents
Culture Documents
www.NewconValve.com
Safety Steel-reinforced
lock-out pins, rubber-coated
and protective flange seals in 16”
rod boots valves and larger
Hand-wheel
safety lock-outs
Optional
pinch-point
safety shroud
Bevel-gear
safety
lock-outs
Gate Pressure
Size A B C D E F H Thickness Rating
2 5.25” 3.50” 7.00” 2.00” 2.00” 4.75” 8.50” .50” 150 psi
3 5.25” 3.50” 7.00” 3.00” 2.00” 6.00” 8.50” .50” 150 psi
4 5.25” 4.50” 8.38” 4.00” 2.00” 7.50” 9.50” .50” 150 psi
6 5.38” 6.00” 10.88” 6.00” 2.25” 9.50” 11.25” .50” 150 psi
8 5.75” 7.25” 13.25” 8.00” 2.75” 11.75” 11.50” .50” 150 psi
10 5.50” 8.50” 16.00” 10.00” 2.75” 14.25” 13.38” .50” 150 psi
12 6.63” 10.00” 18.75” 12.00” 3.00” 17.00” 16.50” .625” 150 psi
14 7.50” 10.88” 20.88” 13.25” 3.00” 18.75” 16.88” .625” 150 psi
16 10.50” 12.50” 23.50” 14.75” SEE G.A. 21.25” 21.25” 1.125” 150 psi
18 10.75” 15.50” 25.38” 17.25” SEE G.A. 22.75” 23.50” 1.125” 150 psi
20 11.00” 16.00” 27.63” 19.00” SEE G.A. 25.00” 26.50” 1.50” 150 psi
24 12.00” 19.00” 32.25” 23.00” SEE G.A. 29.50” 32.12” 1.50” 150 psi
28 12.00” 21.00” 36.50” 25.75” SEE G.A. 34.00” 35.88” 1.50” 150 psi
30 12.00” 23.12” 38.75” 29.75” SEE G.A. 36.00” 38.00” 1.50” 100 psi
36 12.50” 25.50” 45.62” 33.75” SEE G.A. 42.75” 45.63” 1.50” 100 psi
40 20.00” 28.38” 50.75” 37.75” SEE G.A. 47.25” 50.75” 1.75” 100 psi
42 20.00” 30.50” 53.00” 46.68” SEE G.A. 49.50” 52.50” 1.75” 100 psi
* For additional dimensions and data, please register at www.newconvalve.com for complete general arrangement drawings.
BG HC
HW
TECHNICAL DATA
Valve Style: Bi-directional, resilient seated, 150# Class, Combination Lug/Wafer.
Purge-less, self-flushing. It is not necessary to discharge media during cycling.
Applications: On/off service in severe, abrasive slurries, and dry material handling with working temperatures
under 250 degrees F (Red HT2 Liner) and 200 degrees F (Amber Standard Liner).
Size Range: 02” to 28” - Standard Pressure Rating 150 psi.
Size Range: 30” to 42” - Standard Pressure Rating 100 psi.
Operation/Actuation Options: Manual hand-wheel & bevel gear, air cylinder, hydraulic, electric, and chain wheel.
Air Cylinders: Standard bore diameters are sized for 80 psi, and rated for 150 psi. Oversized cylinders are
sized for 60 psi, and rated for 150 psi.
Valve Orientation: 2” through 14” sizes have a proper flow orientation. 16” valves, and larger, do not. See GA
drawings.
Leakage: Zero leakage to atmosphere & 100% bubble tight downstream shut-off.
One-Piece Field Replaceable Liner: Amber Standard Polyurethane with maximum temperature rating of 200 degrees F.
Red Premium HT2 Polyurethane with maximum temperature rating of 250 degrees F.
Liner seat cavity matches gate bevel profile. Solids do not permanently collect or become
imbedded in the liner seat.
Gate Seal: Field replaceable molded elastomer, with maximum temperature rating of 250 degrees F.
Wafer Style Bodies: Epoxy coated ductile iron (ASME/ANSI B16.5/150, Bl6.10, B16.47).
Mechanical Flange Seals: One pair, 3/4” steel reinforced, rubber coated, standard on valves 16” and larger.
Cycle Speeds: NewCon valves can be cycled, open or closed, at the customer’s preferred speeds without
limitations.
Installation Requirements: Typical installations include applications in both horizontal and vertical piping. See GA
drawings.
Hydro Testing/Pressure Rating: Standard at 1.5X rated pressure. Higher test ratings are available, with or without optional gate
alloys.
Valve Port: Full, unobstructed flow, enabling reduced internal wear.
Wear Components: Rebuild kit consists of a one-piece urethane liner and a molded elastomer gate seal. SS gates
are rarely replaced.
Safety Locking Devices: Standard in air cylinder actuated valves up to 30” and all manual valves.
Stainless Gate Material: Standard is 304 SS. Others are available and in stock.
Materials of Construction: The NewCon knife gate valve bodies are internally and externally epoxy coated ductile iron.
The knife gate is standard with 304 SS, and the liner
is one-piece, field replaceable urethane.
The gate seal is molded elastomer,
and is also field replaceable.
Gate Thicknesses:
02” through 10” .500”
12” through 14” .625” Thickest Gate
16” through 18” 1.125” in the Industry!
20” through 36” 1.500”
40” through 42” 1.750”
AC EL
Heavy Duty GEN II
Hydraulic Cylinders
Series 2H / 2HD / 2HB & 3H / 3HD / 3HB
Catalog HY08-1314-1/NA Heavy Duty Hydraulic Cylinders
Series 2H / 2HD / 2HB & 3H / 3HD / 3HB
View
Table of
Series 2H / 3H Design Improvements
Contents
Increase Reliability
View
Table of
One Common Platform –
Contents
Three Construction Choices
Configurable Gland, Tie Rod & Non-Tie Rod Styles are
all available when you need them.
without
Rod gland serviceable, using gland and spanner wrenches,
disturbing tie rod torque
added
High strength tie rod material with rolled thread for
strength
Series 2HD & 3HD Tie Rod Style with Bolt-On Gland
Bolt-on gland (see Gland Retention page for bore and
mounting availability) with robust Tri-Lip rod sealing system.
Industrial cylinder standard tie rod construction ensures head
and cap remain in contact with tube ends to ensure leak free
performance.
Advantages
without
Rod gland serviceable, using a common hex wrench,
disturbing tie rod torque
added
High strength tie rod material with rolled thread for
strength
Series 2HB & 3HB Non-Tie Rod Style with Bolt-On Gland
Non-tie rod style with bolt-on gland (see Gland Retention page
for bore and mounting availability) and robust Tri-Lip rod sealing
system. Head and cap are bolted to threaded body flanges.
Advantages
View
Table of
Piston Sealing Solutions for the
Contents
Most Demanding Applications
Piston Seal Technology For The 21st Century
Parker’s new universal piston seal design addresses the performance balance between low
pressure sealability, low friction, extrusion resistance and seal life.
One piston style is used for all piston seal and wear ring configurations and will suit all application
requirements. A common piston design permits field changing of seal configuration or seal and
wear band material without replacing costly machined components when variations in application
parameters occur, such as fluid, temperature or duty cycle.
All piston options include dual non-metallic wear rings to provide maximum stability and bearing
area for protection against eccentric loads.
Parker WearGard™ wear rings are internally lubricated for reduced friction and formulated for
heavy-duty load-bearing applications.
The Parker HP energized bi-directional piston seal The Parker KP bronze filled PTFE seal ring material
improves upon the low friction and long wear of has low running friction for accurate positioning in
lipseals by including excellent low pressure sealing closed loop servo applications.
performance. Specially formulated polyurethane is
When combined with a fluorocarbon energizing ring
long wearing and abrasion resistant with running
the Parker KP seal is rated for 400° F and will increase
friction comparable to lipseals. An o-ring energizer
service intervals in high temperature applications
ensures virtually zero leakage in low pressure
when compared to fluorocarbon lipseals.
applications. Also, pressure trapping that can result
with energized lipseals is not possible with a single By combining the Parker KP seal with other energizer
energized seal. o-ring compounds and wear ring materials, the
KP seal offers excellent service in all Seal Class
Parker’s HP piston seal is an excellent choice for most
industrial applications operating with mineral based environments.
hydraulic oil and is available in Seal Classes 1 and 4.
View
Table of
Contents
Selection Guide
Heat Resistance Good (200° F Max.) Best (400° F Max.) Better (300° F Max.) Better (250° F Max.)
The Parker RP step cut ring is made of self- The Parker WP Mixed Media seal is designed for
lubricating, glass reinforced, thermoplastic and is applications requiring different media on either side of
o-ring energized. Unlike cast iron rings that bypass the piston. This option is ideal when hydraulic oil is on
oil, the Parker RP seal provides drift free operation one side of the piston and air is on the opposite side;
throughout the operating pressure range. This tough and it can be equally effective when dissimilar fluids
seal is fully extrusion resistant, even in the face of are on either side of the piston.
extreme pressure spikes, thus ensuring superior wear
Superior low-friction bi-directional sealing is
resistance in the most demanding applications.
accomplished by combining an energized filled PTFE
Parker RP can operate up to 300° F and is compatible seal with a redundant elastomer seal. Energizer and
with Seal Classes 1, 2, 3, 4, 5 and 6. redundant elastomer seal materials are available
for compatibility with seal classes 1, 2, 3, 5 and 6.
Note: WP piston seal groove is not universal in
1.50" bore.
View
Table of
Versatile Piston Rod Sealing Systems
Contents
Deliver Dry Rod Performance
Parker offers the best performing On the return stroke any dirt
and broadest selection of rod or foreign matter collected
sealing options. Our TS2000 on the rod is wiped off by the
threaded Jewel Gland sealing leading edge, or outer lip of the
system in Series 2H and Tri-lip Wiperseal. At the same time,
Bolt-on Gland in Series 2HD / any oil which may be trapped
2HB are proven anchors of the between the Wiperseal and
offering. the rod seal is returned into the
As the rod strokes out, its motion cylinder. In other words, we have
and friction dynamically flex an automatic check valve that
the multi-sealing edges of the prevents any appreciable amount
TS2000 (shown above) and of oil to leak past the seals, and
the Tri-Lip rod seal to maintain then returns any oil that has
their contact with the rod. This managed to wipe by the rod seal.
provides a cutting action to shear Both the TS2000 Jewel Gland
the oil from the rod, allowing the and Tri-Lip glands are easily
rod to pass out of the rod seal practically dry. Any removed for service without loosening tie rods and
oil film that remains on the rod is stopped by the disturbing the pressure envelope. Material options for
inner lip of the Wiperseal and held between it and both glands allow compatibility with
the rod seal. Seal Classes 1, 2, 3, 4, 5 & 6.
View
Table of
Section A
Contents
Overview
A
Features and Benefits 2-3
Application Check List 4
Mounting Styles & Tips for Applying Them 5
2H & 3H Family Model Code / How To Order 6-7
View
Table of
The inside story on why
Contents
Series 2H is your best choice in Align-A-Groove – A 3/16"
wide surface machined at
heavy duty hydraulic cylinders each end of the cylinder
body. Makes precise
Overview
Parker’s Exclusive Stepped floating very close to being theoretical, with the exception of the last 1/2
cushions combine the best features inch of travel. This is a constant shape in order to have some
of known cushion technology. flexibility in application. The stepped cushion design shows
reduced pressure peaks for most load and speed conditions,
Deceleration devices or built-in “cushions” are optional and with comparable reduction of objectionable stopping forces
can be supplied at head end, cap end, or both ends without being transmitted to the load and the support structure.
change in envelope or mounting dimensions. Parker cylinder
cushions are a stepped design and combine the best features All Parker Hannifin
of known cushion technology. cushions are
adjustable.
Standard straight or tapered cushions have been used in
industrial cylinders over a very broad range of applications. The Series 2H
Parker research has found that both designs have their cylinder design
limitations. incorporates the
longest cushion
As a result, Parker has taken a new approach in cushioning of sleeve and cushion
industrial hydraulic cylinders and for specific load and velocity spear that can be
conditions have been able to obtain deceleration curves that provided in the
come very close to the ideal. The success lies in a stepped standard envelope
sleeve or spear concept where the steps are calculated to without decreasing
approximate theoretical orifice area curves. the rod bearing
and piston bearing
In the cushion performance chart, pressure traces show the
strengths.
results of typical orifice flow conditions. Tests of a three-step
sleeve or spear show three pressure pulses coinciding with the
steps. The deceleration cushion plunger curves shape comes
Overview
A
Optional KP style with
filled PTFE piston seal –
low friction, high heat
resistance for cycling
and load holding service.
Overview
– use TC or TD centerline of the cylinder
A
• Tension loads (pull)
– use TB or TD
View
2H & 3H Family Model Code
Table of
Contents 5.00 C K F P TB 2H H N A
Bore Dia. Cushion Double Mounting Mounting Combination Series Piston Piston Gland
Overview
Head Rod End Style Modification Mounting Designator Seal Magnet & Seal
A
Cylinder Style5
Specify Use “C” Use “K” P = Use only if Thrust 1.50"-6.00" Bore 2H & 3H
bore dia. only if only if a Key required. 2H, 2HD, 2HB A = Threaded Jewel
in inches head end double (Style C or F.) Gland with
7.00"-8.00" Bore
1.50 cushion rod end M = Use only for 3H, 3HD, 3HB TS200 Rod
2.00 is required. cylinder is Manifold Port Seal (for Class
required.1 O-Ring Seal. 1 service) −
2.50
Applies to C Any practical additional Seal
3.25 Mount only. Classes are
mounting style
4.00 listed. available
5.00 Mounting style offering varies by 2HD, 2HB, 3HD,
6.00 series. See 'Standard Specifications' H = Parker HP (standard) 3HB
pages for availability. Piston Seal H = Bolt-on Gland
7.00
T = Basic, No Mount K = Parker KP (universal) with Tri Lip Rod
8.00
TB = Tie Rods Extended Head Piston Seal6 Seal (for Class
TC = Tie Rods Extended Cap 1 & 4 service) −
R = Parker RP (extrusion additional Seal
TD = Tie Rods Extended Both Ends resistant) Piston Seal Classes are
J = Head Rectangular Flange W = Parker WP (mixed available
JB = Head Square Flange media) Piston Seal All Series
JJ = Head Rectangular
F = Gland with
H = Cap Rectangular Flange N = No Magnet dual PTFE Rod
HB = Cap Square Flange 3 = Magnet Piston with SS Seals and PTFE
HH = Cap Rectangular Cylinder Tube for Global Wiperseal6
C = Side Lug2 Switches
F = Side Tapped2 7 = Magnet with Carbon Steel
BB = Cap Fixed Clevis Cylinder Tube for ALS Switches
D = Head Trunnion
DB = Cap Trunnion
DD = Intermediate Fixed Trunnion3
Series 2HB & 3HB
DE = Heavy Duty Intermediate
Fixed Trunnion3
Minimum Stroke Table
SB = Spherical Bearing Bore All Mounting Mounting
Ø Styles Except Styles
SE = Heavy Duty DD & DE DD & DE
Spherical Bearing
1.50 1.062 2.875
TX = Special Mounting 2.00 1.562 3.750
(Consult Factory)4
2.50 1.437 3.625
Shaded boxes identify required model number fields. 3.25 1.687 4.375
1
Available mounting styles for K Type cylinders are located at the end of Section A. When 4.00 1.937 5.000
ordering a double rod end cylinder, the piston rod number and piston rod end threads are 5.00 1.937 5.437
to be specified for both rod ends. 6.00 2.562 6.687
The model number should be created as viewing the primary rod end on the left hand side. 7.00 3.437 8.062
Example: K Type Cylinder:
4.00CKTD2HLT14A28AC10.000 8.00 2.937 8.250
2
Mounting Styles C and F should have a minimum stroke length equal to or greater than their bore size.
3
Specify XI dimension.
4
Special mounting styles that do not resemble a standard catalog offering will be designated as style TX by the factory. See page 4 for
instructions to enter a mounting that resembles a standard style.
5
In general, the model numbers as read left to right corresponding to the cylinder as viewed from left to right with the primary end at the left.
The second or subsequent mountings are mountings called out as they appear in the assembly moving away from the rod end. Except when
tie rod extension mountings are part of a combination, all combinations should have a “S” (Special) in the model code and a note in the body
of the order clarifying the mounting arrangement. The “P”, as used to define a thrust key is not considered to be a mounting. However it is
located at the primary end.
6
Piston seal code K and Gland & Seal code F must be selected for Class 8 service. Dual PTFE rod seals with PTFE wiperseal not available for
0.625" rod.
View
2H & 3H Family Model Code
Table of
Contents T 1 S 1 4 2 A C 16.000
Port Seals Special Piston Rod Piston Rod Piston Rod Piston Rod Cushion Cap Stroke8
Overview
Type Modification Number 9 End Alternate Threads
A
Thread 12
View
Notes
Table of
Contents
Overview
A
Description
Sensing and Control offers the world's most advanced line of
heavy-duty limit switches. These switches include boss-and-
socket head design for secure head-to-body retention, unique
all-metal drive train for consistent operating characteristics
even at high temperature (lasts longer without the need for
frequent adjustment than drive trains with plastic parts,) self-
lifting pressure plate terminals save wiring time, easily
identified grounding terminal (inside) for compliance with OSHA
and other regulatory agency standards, one piece flat gasket
(seals better than gaskets that go around curves and corners,
does not contact terminal pins to reduce chances of fluid
migration,) front mounting and interchangeability of single-
anddouble-pole switches, plug-in and non plug-in with one
another and with other switch brands, tracking
interchangeability of actuator levers for single- and double-pole
switches, plug-in and non plug-in, twin shaft seals for an extra
measure of protection, inner FC O-ring seal, outer Buna-N seal
(all FC available,) FC shaft and diaphragm seals on side rotary
switches, rugged corrosion-resistant zinc head and body are
phosphate treated and epoxy finished, exclusive teller tab
assures proper torque (when it cannot be moved the lever is
tight enough to prevent slippage) and domestic and
international conduit taps.
LSA6B
Series HDLS Plug-in: Side Rotary; 2NC 2NO DPDT Snap Action; 0.5 in - 14NPT conduit
Product Specifications
Availability Global
Operating Force (O.F.) 0,45 N m max. [4 in lb max.]
Pretravel (P.T.) 15° max.
Overtravel (O.T.) 60° min.
Differential Travel (D.T.) 7° max.
Product Type Heavy-Duty Limit Switches
Actuator Side Rotary
Lever Style Lever Not Included - Reference Lever Required Accessory
2NC 2NO Double-Pole Double-Throw, Snap-Action,
Circuitry
Double-Break
Ampere Rating 10 A (Thermal)
Supply Voltage 600 Vac and 250 Vdc max.
Housing Material Zinc Die-Cast
Termination Type 0.5 in - 14NPT conduit
Housing Type HDLS Plug-in
Series Name HDLS Series
Sealing NEMA 1, 3, 4, 4X, 6, 6P, 12, 13
Approvals UL listed, CSA Certified, CE Certified
CSA File # LR57326/Master Contract 152457
UL File # E37138
Operating Temperature
-12 °C to 121 °C [10 °F to 250 °F]
Range
Agency Approvals and
EN60947-1, EN60947-5-1
Standards
UNSPSC Code 302119
UNSPSC Commodity 302119 Switches and controls and relays
Sealed Industrial