Professional Documents
Culture Documents
This assignment project should be prepared by a group of four or five members. For
this assignment, each group is required to investigate the difference between normal
class and special class concrete from previous literature (minimum 3 literatures).
Please choose ONE of the special concrete types listed as below:
1. Lightweight concrete
2. Fiber reinforced concrete
3. Self compacting concrete
4. Geopolymer
5. Flexible concrete
6. Recycled aggregate concrete
7. Polymer concrete
(*Note that the topic selected by the group must differ from those of the other groups)
1. Explain the basics of mix design, material selection and production process
2. Explain the test method, the test procedure and the properties of the
concrete in the following state :
1. Plastic State
Workability properties
2. Hardened State
Three types of mechanical strength properties – (i.e Compressive, flexural
and tensile strength)
Non destructive test – Two types of NDT (i.e UPV and density)
Two types of durability properties – Water absorption, porosity or etc
Introduction
Faculty of Architecture, Planning & Surveying
Universiti Teknologi MARA(Perak)
32610 Seri Iskandar
Perak Darul Ridzuan
Notes
The criteria for this assignment are:
1. Reference should be made to research journal or books , but coping from the
reference word by word must be avoided. Try to write the report using as
much as possible your own words based on your understanding.
2. The report should attach with relevant photos, diagrams and etc which
necessary.
3. Try to be concise. Avoid include contents not closely relate to the tests.
4. The report must be prepared in A4 size paper using word processor. Avoid
using fancy decorations for lab reports.
5. The cover page should include the following. Title of the report, course code,
date of the submission, particulars of group members (name, student ID,
programme, group e.g. AP2565A)
6. The text should be in font size 12pt, either using Times New Roman or Arial.
7. Produce footer with a page number.
8. Appropriate use of formatting, styles, tabs, indents, section headings, and
white space to feature specific sections.
9. A table of contents is shown.
10. Upload your team's report to the following google drive accounts by date
…………..:
https://drive.google.com/drive/folders/1rPO27RqONeF9MTR7ZtKYtndipH6ylhB
W?usp=sharing
11. Any request for late submission will not be attended and marks will be
deducted for the late submission.
Faculty of Architecture, Planning & Surveying
Universiti Teknologi MARA(Perak)
32610 Seri Iskandar
Perak Darul Ridzuan
Assessment
This assignment will be graded base on following justifications which are: