The document describes 6 circuits using various switches to control one or more lamps connected to a 220v AC power supply. For each circuit:
1) A single pole single throw (SPST) switch is used to operate one lamp.
2) Two SPST switches are used to operate one lamp independently.
3) Two SPST switches operate two lamps individually from a common source.
4) One SPST switch operates two lamps simultaneously from a common source.
5) Two single pole double throw (SPDT) switches operate one lamp independently from a 220v source.
6) Two SPDT switches and one double pole double throw (DPDT) switch allow one lamp to be turned on
Original Description:
this is the experiment of spst, spdt, dpst, dpdt switches.
The document describes 6 circuits using various switches to control one or more lamps connected to a 220v AC power supply. For each circuit:
1) A single pole single throw (SPST) switch is used to operate one lamp.
2) Two SPST switches are used to operate one lamp independently.
3) Two SPST switches operate two lamps individually from a common source.
4) One SPST switch operates two lamps simultaneously from a common source.
5) Two single pole double throw (SPDT) switches operate one lamp independently from a 220v source.
6) Two SPDT switches and one double pole double throw (DPDT) switch allow one lamp to be turned on
The document describes 6 circuits using various switches to control one or more lamps connected to a 220v AC power supply. For each circuit:
1) A single pole single throw (SPST) switch is used to operate one lamp.
2) Two SPST switches are used to operate one lamp independently.
3) Two SPST switches operate two lamps individually from a common source.
4) One SPST switch operates two lamps simultaneously from a common source.
5) Two single pole double throw (SPDT) switches operate one lamp independently from a 220v source.
6) Two SPDT switches and one double pole double throw (DPDT) switch allow one lamp to be turned on
Connect an electric lamp so that it may be operated from a 220v
AC supply using an SPST supply A circuit using a 220v AC supply and SPST switch is given below
2. Connect a lamp so that it may be operated independently by
either of two SPST switches. A circuit using two SPST switches is depicted below
3. Connect two lamps so that either maybe operated from a
common source by its own switch A circuit using a SPST switch and two lamp is depicted below 4. Connect two lamps so that both may be operated simultaneously from a common source by one SPST switch. (preferable diagram) My preferable diagram is given below
5. Connect a lamp so that it may be operated independently by
either of two SPDT switches from a 220v source A circuit using two SPDT switches and a 220v AC source is given below 6. Connect a lamp using two SPDT and one DPDT switches to the power supply in such a way that the lamp may be turned on/off by any of the three switches. A circuit using two SPDT switches and one DPDT switches is given below. Submitted by: Joynul Ibne Islam Department of Biomedical Engineering Roll No- 20126015