Professional Documents
Culture Documents
VHMS controller
a For details of the basic precautions, outlines,
method of sending and receiving data, and the
procedure for the initial setup, see Testing and
adjusting.
Specifications
1. Voltage of power supply: DC20V - DC30V
2. Size (mm): W272 x D169 x H72
Function
The VHMS controller collects and stores signals
from each sensor and signals from the machine
controller. It also gives commands for transmitting
the accumulated data through the communications
satellite.
2 HD785-7
10 Structure, function and maintenance standard SEN01291-01
Specifications
1. Power supply voltage: DC12V – DC30V
2. Size: W306 x D177 x H50 (mm)
Installation location
Install the controller to rear right bottom of opera-
tor's cab.
Connector portion
CN1: DRC23-40PA
CN2: Communications antenna cable connector
Antenna
Specifications
1. Type : Helical whip antenna
2. Impedance : 50 z
3. Input terminal: M-P type
4. Length : 165 ± 20 mm
Installation location
Install pole at right front of machine and set
antenna on top of it.
Function
The antenna transmits the data collected and accu-
mulated by the VHMS controller through the com-
munications satellite to the computer center.
HD785-7 3