Professional Documents
Culture Documents
Typical Single Point Sonic Pipe Flare Information
Typical Single Point Sonic Pipe Flare Information
Our single point sonic flare tips provide an exceptionally flexible means of high pressure gas disposal whether
by venting or flaring. Each tip is purpose designed for each different application and takes into account the
need for relatively low radiation, reliable ignition, long life and elimination of problems caused by high winds.
This type of flare is the most basic sonic tip, typically operating at pressures up to 6.0 barg. They provide the
operators with a simple, robust and reliable flare tip that will typically exhibit long life time and are relatively
easy to manufacture. Argo Flare Services can supply new bespoke sonic flare tips or refurbishments of other
OEM flares to suit the operator’s specific platform or site conditions. Where there is also a low pressure flare
tip this can be incorporated within the sonic pipe flare or close coupled to it.
Flare Tip
The standard flare tip is fabricated in heat resistant 316L SS, 310S stainless steel or 800H materials. Upgrades
to higher heat resistant materials are also available when the operating conditions are more onerous than
normal. The main body consists of a single pipe, wind deflectors, and flame stabilisers.
In certain circumstances small diameter flame stabilisation pipes will be added to the flare body to enhance
flame stability.
* Typical capacity at 5.0 barg tip back-pressure with a molecular weight of 25 kg/kgmol and an
operating temperature of 30ºC