Professional Documents
Culture Documents
INTRODUCTION:
Traditional current source inverters (CSIs) and voltage
source inverters (VSIs) can only provide either boost or Buck
dc-ac conversion respectively. Accordingly to get greater AC
output voltage in the case of VSI, the VSI has to add extra
DC-DC boost converter in between the DC supply and
inverter bridge. Besides, the switching-on of both devices on a
phase-leg or two-phase legs or all the three-phase legs of the
inverter can cause dead-short circuit of the power
semiconductor devices.
EXISTING SYSTEM:
An impedance-source inverter (ZSI) in which the
impedance network consisting of two capacitors and two
inductors cascaded in between dc source and bridge inverter.
In the shoot-through state, the inductors (L1, L2) are charged
by the capacitors (C1, C2). In the non shoot-through state, the
stored energy in the inductors and input energy is released to
the dc-link, which boosts the voltage gain of the inverter in a
single-stage, thereby eliminates the dead time and improves
the reliability.
But, the conventional ZSI suffers from discrete input
current, the capacitors has to sustain high voltage, does not
share common ground with source and large inrush current
during starting condition.
DRAWBACK:
The capacitors has to sustain high voltage.
Does not share common ground with source
PROPOSED SYSTEM:
Novel enhanced-boost qZSI with two switched
impedance network inverter topology is proposed to provides
continuous input current from the source, reduces the
capacitor voltage stress to use lower component rating
devices, shares common ground with DC source and it
overcomes the starting inrush current problem. The proposed
novel inverter topologies for continuous and discontinuous
input current configurations respectively. Both configurations
have the same components (four-capacitors, five-diodes, and
four inductors are utilized). The only difference between these
proposed topologies is that, the negative polarity of capacitor
C3 is connected to positive terminal of dc supply in case of
discontinuous input current configuration.
ADVANTAGES:
APPLICATIONS: