INTERNATIONAL,
SIRIM QAS International Sda.Bhd, (41033429)
Nod, Pesiaran Dato’ Menteri, PO.BOX 7035, Section 2
440700 Shah Alam, Selangor Darul Ehsan, Malaysia,
446253 55446252
SInIM
QAS:
a TEST REPORT
REPORT NO.: 2017EEA1011-S1 PAGE: 1 OF 2
This Test Report refers only to samples submitted by the applicant to SIRIM QAS International Sdn. Bhd. and tested by
SIRIM QAS International Sdn. Bhd. This test report
‘advertising purposes by any means or forms without written approval from Managing Director, SIRIM QAS International Sdn.
Bhd. Please refer overleat for Conditions Relating To The Use of Test Report.
Applicant
Manufacturer
Product
Reference Standard!
Method of test
Description of sample :
Date received
Job No./Ref. No.
Overall test result
Issue date
Approved Signatories;
‘Rot be reproduced, except in full and shall not be used for
CUPRA INTERNATIONAL LTD.
P.O.BOX 957, OFFSHORE,
INCORPORATIONS CENTER,
ROAD TOWN, TORTOLA,
BRITISH VIRGIN ISLANDS.
CUPRA INTERNATIONAL LTD.
NO. 61, JALAN PERINDUSTRIAN 4/KU8,
KAWASAN PERINDUSTRIAN MERU SELATAN,
41050, KLANG, SELANGOR,
MALAYSIA
Metal Flexible Conduits
BS EN 61386-1:2008 & BS EN 61386-23:2004+A11:2010
Brand CUPRA
Model / Type : 1) Liquid Tight Coated Metal flexible Conduit
2) Nickel Coated Brass Liquid Tight Flexible Conduit
‘Adaptor
Size 25mm
Class Class 4
30 MAY 2017
J20171420485
COMPLIED
06 NOV 2019
I BIN MUSTAFFA)
Head
lectrical & Electronic 1 Section
Testing Services DepartmentREPORT NO.: 2017EEA1011-S1 | PAGE :20F 2
‘This Test Report refers only fo samples subrniied by the applicant to SIRIM GAS International Sdn. Bhd. and tested by SIRIM OAS
Intemational Sdn. Bhd. This test report shall not be feproduced, except in ful and shall not be used for advertising purposes by any
means or forms without written approval from Managing Director, SIRIM QAS Intemational Sdn. Bh.
SUMMARY OF TESTS:
1. This is a supplementary test report to supplement the test report no. 2017EEA1011
2. This supplementary report shall be read in conjunction with SIRIM test report no,
2017EEA1011
3. This test report is issued for the amendment of the address of applicant and manufacturer at
the cover page.
4, The address of applicant and manufacturer of report no. 2017EEA1011 is therefore, replaced
by the new address of applicant and manufacturer in this test report.