SIRIM QAS International Sdn, (410334-X)
‘Nod. Petsaran Dato’ Mente, PO.BOX 7035, Seton 2,
40700 Shah Alam, Selangor Darl Ehsan, Malaia,
3
iS
FE Tet: 0355446253 / 35446252
fs Foc on ssescare
SIRIME ‘wo sirim-as.com my
@QAS:
TEST REPORT
REPORT NO.: 2017EEA0380-S1 PAGE: 1 OF 2
This Test Report refers only to samples submitted by the applicant to SIRIM GAS Intemational Sdn. Bhd. and tested by
SIRIM QAS International Sdn. Bhd. This test report shall not be reproduced, except in full and shall not be used for
‘advertising purposes by any means or forms without written approval from Managing Director, SIRIM QAS International Sdn.
Bhd, Please refer overlea for Conditions Relating To The Use of Test Report.
Applicant CUPRA INTERNATIONAL LTD.
P.O.BOX 957, OFFSHORE,
INCORPORATIONS CENTER,
ROAD TOWN, TORTOLA,
BRITISH VIRGIN ISLANDS.
Manufacturer CUPRA INTERNATIONAL LTD.
NO. 61, JALAN PERINDUSTRIAN 4/KU8,
KAWASAN PERINDUSTRIAN MERU SELATAN,
41050, KLANG, SELANGOR,
MALAYSIA
Product : GICONDUIT AND FITTINGS
Reference Standard/
Method of test BS EN 61386-1:2008 & BS EN 61386-23:2004+A11:2010
Description of sample : Brand : CUPRA
Size : 20,25 & 32mm.
Class : Class 4
Date received : 07 MAR 2017
Job NoJ/Ref.No. : J20171420191
Overall test result COMPLIED
Issue date 06 NOV 2019
Approved Signatories;
os Be
(MOHAMAD ASNAN BIN AHMA
Testing Executive
IM. BIN MUSTAFFA)
‘oy, Head
Se Precttica & Electronic 1 Section
Testing Services DepartmentREPORT NO.: 2017EEA0380-S1 PAGE : 2 0F 2
“This Test Report refers only to samples submited by the applicant fo SIRIM GAS International Sdn. Bhd. and tested by SIRIM GAS
International Sdn. Bhd. This test report shall not be reproduced, except in fll and shall not be used for advertising purposes by any
‘means or forms without writen approval from Managing Director, SIRIM QAS International Sdn. Bhd.
SUMMARY OF TESTS:
1
This is a supplementary test report to supplement the test report no. 2017EEA0380.
2. This supplementary report shall be read in conjunction with SIRIM test report no.
2017EEA0380.
3. This test report is issued for the amendment of the address of applicant and manufacturer at
the cover page.
4. The address of applicant and manufacturer of report no. 2017EEA0380 is therefore, replaced
by the new address of applicant and manufacturer in this test report.