Professional Documents
Culture Documents
Fijación de Capotas Accessori - Fissaggio ENG
Fijación de Capotas Accessori - Fissaggio ENG
8
6 Covers Fixing with galvanised hooks
type G
Fixing with bracket
type S
20
6.3.6 Fixing
Max 50
71
accessories 8
3
28 Part. "A"
Max 50
71
100
3
28 Part. "A"
16
Part. "A"
102
10
78
The fixing system is designed for a quick 100
positioning and a simple removal of the The set is composed by:
covers to allow the inspection of the idler - 1 hook M8
16
sets and the conveyor belt. - 1 nut M8
Part. "A"
102
- 1 washer 10
78
Covers will be supplied: Quantity to be ordered: 4 for each cover.
- with punching for a fixing bolts, hooks
and brackets; Ordering code:
- without punching for a fixing by stainless CPTA, LG, 60
steel straps. CPTA, LG, 70 Details of the components
CPTA, LG, 80 galvanised galvanised bracket
washers thickness 3 mm
The values 60, 70 and 80 represent the nut wing
length “L” of the hook. corrugated steel M8 nut
At the order time you should determine sheet
dimension “H” too.
galvanised zinc-plated
galvanised bracket
Fixing with galvanised bolts washers thickness 3 mm bolts
type B nut wing
corrugated steel M8 nut
sheet
screw
M8x50
flat washerzinc-plated
bolts
screw
suggested support profile
M8x50
dimensions 30x30x4 (not supplied)
flat washer
The standard supply includes:
- 1 bracket 100x100x3
- 1 screw M8x40
- 1 nut M8
suggested support profile
dimensions 30x30x4 (not supplied)
- 1 wing nut
The set is composed by: - 2 galvanised washers
- 1 screw M8x20 - 1 flat washer
- 1 nut M8
- 1 galvanised washer Quantity to be ordered:
Quantity to be ordered: 4 for each cover. - for belt width up to 800 = 2 for each cover
- for belt width up to 1000 and above = 4
Ordering code: CPTA, BU for each cover
At order time you should determine
dimension “H” for the punching. Ordering code: CPTA, ST.
292
6 Covers Fixing with STAINLESS STEEL straps and hooks type C
stainless stainless
steel strap steel spring
hook
fixed hook
profile
bolt M8X20
L 30X30X4 nut and washer
Each cover must be fixed by a stainless must be cut at the right dimension and
steel strap of 20 mm width and 0,6 mm punched.
thickness.
The steel strap is positioned on top of the The standard supply includes:
section in the lower corrugation. - 1 strap with stainless steel spring and
As shown in the figure and in relation to the galvanised hook
section length, the steel strap is positioned - 1 fixed galvanised hook
and fixed as follows: - 2 galvanised bolts M8x20
a) on one side in the angle section drilled to - 2 galvanised washers
accept bolts and washers M8x20.
b) on the other side and in the identical
position with a hook fixed to the angle
section with a nut and washer M8x20.
c) when mounting the stainless steel straps
copertura
96
800 1 2
1000 1 2
staffa di fissaggio
CPT/5F 1001
1200 2 2
25 (strap 15020040 – length 3200)
1400 2 2 profilo L 30X30X4
supporting structure
quantity. Advantages: no punching of the ring hook for conveyor belt
code P15490143
support profile. All the components are
completely in stainless steel – anticorrosion.
“T-shaped”
At order time for the related covers please support profile
specify the height “H” for punching.
g arch 293
900
836 UTILE