Professional Documents
Culture Documents
B. 2
5L
2
C.
3L
4
D.
5L
SHEAR STRESS
Weekly LiveDISTRIBUTION
Mock Test-4
3. The displacement at the end C of the overhanging
beam as shown below is
wL3
A.
12EI
wL3
B.
24EI
wL4
C.
24EI
wL4
D. 48EI
SHEAR STRESS
Weekly LiveDISTRIBUTION
Mock Test-4
4. Axial force in member BC is :
A. M/l (Tension)
B. M/l (Compressive)
C. 2/3 (M/I) (Tensile)
D. 2/3 (M/I) (Compressive)
SHEAR STRESS
Weekly LiveDISTRIBUTION
Mock Test-4
5. Consider the following statements regarding design of
tension members by limit state method:
1. It is an iterative method.
2. It is checked only for net cross-sectional area from
the factored load and from it trial cross-section is
chosen.
3. Safety against net section rupture and block shear
failure is checked after connection design.
4. Finally it is checked for maximum slenderness ratio,
which is must.
Which of the above statements are CORRECT?
A. 2 and 3 B. 1,2 and 4
D. 1,3 and 4 D. All of these
SHEAR STRESS
Weekly LiveDISTRIBUTION
Mock Test-4
6. In the empirical expression for the static modulus EC in
terms of the characteristic cube strength fck' given by
IS IS 456:2000, the constant 5000 has the unit of
A. MPa
1
B.
(MPa)1/2
C. (MPa)1/2
𝑖
19. If 𝑖 = −1, then find the value of 𝑖 ?
A. 2
B. 1
𝜋
C. − 2
𝜋
D. 𝑒 −2
Weekly
SHEAR LiveDISTRIBUTION
STRESS Mock Test-4
20. Raju cycled 10 km South from his house, turned
right and went 5 km and again turned right and
cycled 10 km and then turned left and cycled 10 km.
How many kilometers will he have to cycle back to
reach his house?
A. 10 km
B. 5 km
C. 20 km
D. 15 km
Weekly
SHEAR LiveDISTRIBUTION
STRESS Mock Test-4
A. 1 only B. 2 only
A. 1 only B. 2 only