Professional Documents
Culture Documents
Easy-to-Customize
Trimmer
Standardized intervals between base plate setting screws enable to
use various Base plates for a wide range of applications.
RT0700C
Trimmer base assembly Offset base plate with Plunge base assembly
with Square base plate Grip of Plunge base assembly with Side grip
2) The numbers in the bar chart below is relative values when the capacities of Competitor B is
indexed at 100. Double Insulation
Cut a 1,000mm long groove in Taun at a depth of 6mm using 6mm straight bit. Constant Speed
Soft Start
Work Speed
Dust Collecting
Makita RT0700C 125
Continuous rating Input 710W
Competitor "B" 100 Capacity Collet : 6mm, 8mm or 1/4”, 3/8"
No load speed (rpm) 10,000-30,000
Dimensions (L x W x H) 89x89x200mm (3-1/2"x3-1/2"x7-7/8")
Competitor "P" 90 Net Weight* 1.8kg (3.9lbs)
Plunge base (Option)
Power supply cord 2.5m (8.2ft)
Non-slip elastomer-covered
body grip for increased
operator comfort.
Simple and efficient
base lock system
Rubberized soft grip 18mm
High durability and
3 stage cut depth adjustment
accuracy obtained by
High durability and using aluminum for
accuracy obtained by using offset base
Ergonomically contoured knob Optional Fine adjusting straight aluminum for plunge base Ergonomic body grip
style handles guide can be used. easy-to-grasp with one hand Replaceable,
Replaceable, non-marring non-marring plastic
plastic base plate for protection of base plate for protection of
plunge base and smooth sliding on work surface offset base and smooth sliding on work surface