Professional Documents
Culture Documents
Sheet
121/4" (311 mm) SFE66DH
Product Specifications
Cutter Type Select Cutter
IADC Code S323
Body Type STEEL
Total Cutter Count 80
Cutter Distribution 13 mm 16 mm 19 mm
Face 0 20 30
Gauge 6 18 0
Back Ream 3 0 0
Up Drill 3 0 0
Number of Large Nozzles 6
Junk Slot Area (Sq in) 34.97
Normalized Face Volume 61.33%
API Connection 6 5/8 REG. PIN
Recommended MakeUp Torque* 37,119 – 43,525 Ft*lbs
Nominal Dimensions**
MakeUp Face to Nose 12.03 in 306 mm
Gauge Length 3 in 76 mm
Shank Diameter 7.75 in 197 mm
Break Out Plate (Mat.#/Legacy#) 181955 / 44050
Approximate Shipping Weight 435.77 Lbs. / 198 Kg.
Special Features
1 Piece Bit
AntiBalling Coating
Back Reaming Cutters on Gauge Pads
Combo Cutters on Gauge Pads
Dual Row Cutting Structure "D" Feature
Drop In Cutters on Gauge Pads
EDL Tool Specific Gauge
PDC Domes on Gauge Pads
Relieved Gauge
Recommended Operating Parameters
(Recommended operating parameters are based on global guidelines and should always be
validated with local application specific data)
Rotary Speed 33 200 rpm
WOB 6 46 klbm
SteelForce TM Special Features
Design at the Customer InterfaceSM
Proprietary business model that utilizes Local Expertise to
improve overall Drilling Efficiency.
Increased speed of Cyclesoflearning leads to better bit design
selection and parameter optimization in a given application.
Local Application knowledge is utilized to create custom
engineered solutions collaboratively with the customer.
SelectCutter™ PDC Technology Advanced Hardfacing Material (K1)
Improvements in abrasion resistance 100% (2X) more abrasion resistant.
maintains the sharp cutting edge longer 30% more erosion resistant.
for a higher rate of penetration. Tough carbide pellets.
Improvements in impact resistance K1 hardfacing is virtually fracture proof.
inhibit chipping and breaking to retain a sharp drilling edge for a
higher rate of penetration.
Improving Thermal Mechanical Integrity means the diamondto
diamond bonds can survive elevated temperatures prior to separating
resulting in premature cutter wear.
*Bit specific recommended makeup torque is a function of the bit I.D. and actual bit sub O.D. utilized as specified in API RP7G Section A.8.2.
**Design dimensions are nominal and may vary slightly on manufactured product. Halliburton Drill Bits and Services models are continuously reviewed and refined. Product specifications may change without notice.
© 2019 Halliburton. All rights reserved. Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.