Professional Documents
Culture Documents
DESCRIPTION
Disclaimer
The contents of this document are subject to revision without notice due to
continued progress in methodology, design and manufacturing. Ericsson shall
have no liability for any error or damage of any kind resulting from the use
of this document.
Trademark List
All trademarks mentioned herein are the property of their respective owners.
These are shown in the document Trademark Information.
Contents
1 Product Overview 1
1.1 Purpose 1
1.2 Variants 1
2 Function Description 3
2.1 SHU 01 01 3
2.2 SHU 02 01 4
3 Technical Data 7
1 Product Overview
1.1 Purpose
The SHU is used as to connect peripheral units to the Enclosure Control (EC)
bus.
1.2 Variants
The following variants are available:
• SHU 01 01
• SHU 02 01
1.2.1 SHU 01 01
SHU 01 01
B B
A A
IN 1 2 3 4 5 6 7
Ge0093A
1.2.2 SHU 02 01
The SHU 02 01 connects up to 16 peripheral units to the EC bus. Figure 2
shows the SHU 02 01.
A
SHU
02 01
1
2
3
4
5
6
7
8
Ge0785A
Figure 2 SHU 02 01
2 Function Description
2.1 SHU 01 01
The SHU 01 01 has the following functions:
Address Connection
EC-bus in
B 7×EC-bus B out
Ge0123A
2.2 SHU 02 01
The SHU 02 01 has the following functions:
EC-bus A EC-bus B
Bus connection
Cold-Start and
Priority Load Function
Address Connection
Ge0786B
The port configurations for a single SHU are presented in Table 2 and Table 3
for cabinets with DU and ESC respectively.
3 Technical Data
This section describes the technical data for the SHU variants.
4.1 SHU 01 01
This section describes the interfaces for the SHU 01 01.
Table 7 lists the details for the external interfaces on the SHU 01 01.
4.2 SHU 02 01
This section describes the interfaces for the SHU 02 01.
Table 8 lists the details for the external interfaces on the SHU 02 01.