Professional Documents
Culture Documents
Universal Remote
Instruction Manual
dvd/vcr
dvd/v
cr
7252
V2| 3/17
Downloaded from www.Manualslib.com manuals search engine
Table of Contents
Introduction...................................................................................... 2
Setup................................................................................................... 3
Button Functions........................................................................... 4
Programming Your Remote...................................................... 6
Direct Code Entry................................................................... 6
Auto Code Search.................................................................. 8
Controlling Combo Devices............................................... 9
Using Your Remote.....................................................................10
Using SHIFT.............................................................................10
Master Volume Feature.....................................................11
Code Identification..............................................................12
Reset to Factory Settings..................................................12
Troubleshooting...........................................................................13
Warranty.........................................................................................14
FCC Statement..............................................................................15
http://www.byjasco.com/remote
2
Downloaded from www.Manualslib.com manuals search engine
Setup
Battery Installation
1. On the back of the remote, push down on the tab
and pull the cover to remove.
2. Match the (+) and (-) marks on the batteries to the
(+) and (-) marks inside the battery compartment,
then insert two (2) AAA batteries. Be sure to use
fresh batteries.
3. Position the battery cover over the compartment,
then press the top until it snaps into place.
Battery Precautions
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (Ni-Cd, Ni-MH, etc.) batteries.
• Always remove old, weak or worn-out batteries
promptly and recycle or dispose of them in
accordance with local and national regulations.
Battery Saver
Your remote automatically turns off if the buttons are
depressed more than 8 seconds. This will save your
batteries should your remote get stuck in a place
where the buttons remain depressed (e.g., between
the sofa cushions).
Code Saver
You have up to 10 minutes to change the batteries
in your remote without losing the codes you have
programmed.
3
Downloaded from www.Manualslib.com manuals search engine
Button Functions
2 1
5 7
9 10
11
12
13
4
Downloaded from www.Manualslib.com manuals search engine
Button Functions
5
Downloaded from www.Manualslib.com manuals search engine
Programming Your Remote
7
Downloaded from www.Manualslib.com manuals search engine
Programming Your Remote
8
Downloaded from www.Manualslib.com manuals search engine
Programming Your Remote
9
Downloaded from www.Manualslib.com manuals search engine
Using Your Remote
NOTE: Remote will stay in shift mode until the SHIFT button is pressed
again, or until 10 seconds of inactivity. The red indicator light will blink
when the remote is in shift mode.
10
Downloaded from www.Manualslib.com manuals search engine
Using Your Remote
11
Downloaded from www.Manualslib.com manuals search engine
Using Your Remote
Code Identification
1. Press and hold the SETUP button
until the red indicator stays on
(approximately 2 seconds) and then
release the button.
2. Press and release the desired device
button (TV, DVD/VCR, CBL/SAT) you
would like the code for.
3. Press and release ENTER button.
4. Press and release the #1 button.
Count the number of times the
remote light flashes. This is the
number corresponding to the first
digit of the code. Repeat the process
by pressing the #2, #3 and #4
buttons for the remaining digits.
5. Press and release ENTER button to
exit this mode.
12
Downloaded from www.Manualslib.com manuals search engine
Troubleshooting
http://www.byjasco.com/remote
MADE IN CHINA
GE is a trademark of General Electric Company and
is under license by Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114.
14
Downloaded from www.Manualslib.com manuals search engine
FCC Statement
ICES-3(B)/NMB-3(B).
15
Downloaded from www.Manualslib.com manuals search engine
16
Downloaded from www.Manualslib.com manuals search engine
24911 | 34927 | 34928
Control Remoto
Universal
Manual de Instrucciones
dvd/vcr
dvd/v
cr
7252
Introducción...................................................................................18
Configuración................................................................................19
Funciones de los Botones........................................................20
Programación de su Control Remoto................................22
Entrada Directa de Códigos............................................22
Búsqueda Automática de Códigos..............................24
Control de Aparatos Combinados................................25
Uso de su Control Remoto .....................................................26
El uso de SHIFT......................................................................26
Función de Volumen Principal ......................................27
Identificación de Códigos.................................................28
Para Restablecer las Configuraciones
Predeterminadas..................................................................28
Solución de Problemas ............................................................29
Garantía...........................................................................................30
Declaración de la FCC...............................................................31
Introducción
Felicitaciones por su compra del control remoto
universal marca GE. Este mando a distancia es capaz
de operar miles de dispositivos de audio / video
incluyendo televisores, reproductores de DVD, cajas
de cable, receptores de satélite y más!
IMPORTANTE: GUARDE ESTE MANUAL Y LA LISTA DE CÓDIGOS PARA
CONSULTARLOS EN EL FUTURO
http://www.byjasco.com/remote
18
Downloaded from www.Manualslib.com manuals search engine
Configuración
Ahorrador de códigos
Tiene hasta 10 minutos para cambiar las baterías
del control remoto sin perder los códigos que haya
programado.
19
Downloaded from www.Manualslib.com manuals search engine
Funciones de los Botones
2 1
5 7
9 10
11
12
13
20
Downloaded from www.Manualslib.com manuals search engine
Funciones de los Botones
21
Downloaded from www.Manualslib.com manuals search engine
Programación de su Control Remoto
22
Downloaded from www.Manualslib.com manuals search engine
Programación de su Control Remoto
Notas de programación
• Es posible que algunos códigos solo ejecuten algunas
funciones del dispositivo. Es probable que haya
otro código en la Lista de códigos que ejecute más
funciones. Pruebe otros códigos de la Lista de códigos
para obtener más funcionalidades.
• Si no encuentra un código que funcione con su
dispositivo o en la Lista de códigos no aparecen
códigos para el dispositivo, use el método Búsqueda
automática de códigos en la siguiente sección para
programar el control remoto.
• En el caso de dispositivos integrados, como por ejemplo,
combinación TV/DVD o TV/ VCR, quizá deba ingresar
un código para cada dispositivo. Consulte la sección
relacionada con el Control de aparatos integrados.
• Escriba los códigos que sirven para programar el
aparato para consultas futuras.
23
Downloaded from www.Manualslib.com manuals search engine
Programación de su control remoto
Notas especiales:
• El botón VOL se puede usar para retroceder por cada
conjunto de 10 códigos.
• La luz roja parpadeará dos veces después de probar
el primero o el último código de cada conjunto de 10.
25
Downloaded from www.Manualslib.com manuals search engine
Uso de su Control Remoto
El uso de SHIFT
26
Downloaded from www.Manualslib.com manuals search engine
Uso de su Control Remoto
27
Downloaded from www.Manualslib.com manuals search engine
Uso de su Control Remoto
Identificación de códigos
1. Mantenga presionado el botón SETUP
hasta que el indicador rojo permanezca
encendido (aproximadamente 2 segundos)
y luego suelte el botón.
2. Presione y suelte el botón de dispositivo
deseado (TV, DVD/VCR, CBL/SAT) para el
que le gustaría el código.
3. Presione y suelte el botón ENTER.
4. Presione y suelte el botón # 1. Cuente el
número de veces que parpadea la luz del
control remoto. Este es el número que
corresponde al primer dígito del código.
Repita el proceso presionando los botones
# 2, # 3 y # 4 para los dígitos restantes.
5. Presione y suelte el botón ENTER para salir
de este modo.
28
Downloaded from www.Manualslib.com manuals search engine
Solución de Problemas
http://www.byjasco.com/remote
Si tiene alguna pregunta o le gustaría recibir
información adicional, visite nuestro sitio web www.
byjasco.com, o comuníquese con nuestro equipo de
soporte técnico al 1-800-654-8483, de lunes a viernes
de las 7:00 a. m. a las 8:00 p. m. CST (hora central
estándar).
29
Downloaded from www.Manualslib.com manuals search engine
Garantía Limitada de 90 Días
HECHO EN CHINA
GE es una marca comercial de General Electric Company
con licencia otorgada a Jasco Products Company LLC,
10 E. Memorial Road, Oklahoma City, OK 73114.
30
Downloaded from www.Manualslib.com manuals search engine
Declaración de la FCC
ICES-3(B)/NMB-3(B).
31
Downloaded from www.Manualslib.com manuals search engine