Professional Documents
Culture Documents
OWNER’S MANUAL
Mini Hi-Fi System
Please read this manual carefully before operating your set and retain it
for future reference.
2 Getting Started
CAUTION concerning the Power Cord This device is equipped with a portable battery or
Most appliances recommend they be placed upon accumulator.
a dedicated circuit; Safety way to remove the battery or the
That is, a single outlet circuit which powers only battery from the equipment: Remove the
that appliance and has no additional outlets or old battery or battery pack, follow the steps 1
branch circuits. Check the specification page of this in reverse order than the assembly. To prevent
Getting Started
owner’s manual to be certain. Do not overload wall contamination of the environment and bring on
outlets. Overloaded wall outlets, loose or damaged possible threat to human and animal health, the
wall outlets, extension cords, frayed power cords, or old battery or the battery put it in the appropriate
damaged or cracked wire insulation are dangerous. container at designated collection points. Do
Any of these conditions could result in electric not dispose of batteries or battery together with
shock or fire. Periodically examine the cord of your other waste. It is recommended that you use
appliance, and if its appearance indicates damage local, free reimbursement systems batteries and
or deterioration, unplug it, discontinue use of the accumulators. The battery shall not be exposed to
appliance, and have the cord replaced with an excessive heat such as sunshine, fire or the like.
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
4 Troubleshooting
35 Troubleshooting
1
5 Appendix
36 General specifications
37 Speakers specifications
38 Trademarks and Licenses
39 Maintenance 2
39 – Notes on Discs
39 – Handling the Unit
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc) FM Antenna (1) AM Antenna (1)
Playback effects
Listens to music with various sound and playback
effects.
LG Bluetooth Remote
LG Bluetooth Remote is an App designed to let you
take control of some of LG’s latest Audio devices.
Non-skid pad (1)-
Refer to the page 26.
CM8530 only
Getting Started
all USB devices.
requirement
MP3/WMA file compatibility with this unit is limited USB device requirement
as follows. yy Devices which require additional program
yy Sampling frequency : within 32 to 48 kHz (MP3), installation when you have connected it to a
within 32 to 48 kHz (WMA) computer, are not supported.
yy Bit rate : within 32 to 320 kbps (MP3), yy Do not extract the USB device while in operation.
40 to 192 kbps (WMA) yy For a large capacity USB, it may take longer than
yy Maximum files : Under 999 a few minute to be searched.
yy Maximum folders : Under 99 yy To prevent data loss, back up all data.
yy File extensions : “.mp3”/ “.wma” yy If you use a USB extension cable or USB hub, the
yy CD-ROM file format : ISO 9660/ JOLIET USB device is not recognized.
yy We recommend that you use Easy-CD Creator, yy Using NTFS file system is not supported. (Only
which creates an ISO 9660 file system. FAT(16/ 32) file system is supported.)
yy You have to set the disc format option to yy This unit is not supported when the total
[Mastered] in order to make the discs compatible number of files is 1 000 or more.
with the LG players when formatting rewritable yy External HDD, Card readers, Locked devices, or
discs. When setting the option to Live File hard type USB devices are not supported.
System, you cannot use it on LG players. yy USB port of the unit cannot be connected to PC.
(Mastered/Live File System : Disc format system The unit cannot be used as a storage device.
for Windows Vista)
yy Some USB may not work with this unit.
Front panel
1
a
Getting Started
b
h
d i
e j
f k
Getting Started
Deletes a song on JUKE BOX list.
USB REC
Records to USB. i FILE SEARCH
Selects a folder and a file on CD/USB function.
d FUNCTION
Selects the function and input source. j BASS BLAST
Turn FUNCTION knob clockwise or Selects the BASS BLAST or BYPASS sound
counterclockwise. directly.
e LATIN EQ B (Open/Close)
Chooses locally special equalizer. I
SMART DJ - Stops playback or recording.
Selects SMART DJ mode. (For more information - Cancels DELETE function.
refer to the page 22) SPK Lighting / DEMO (CM8530 / CM8430)
AUTO DJ - Changes speaker’s lighting effect.
Selects the AUTO DJ mode. (For more - Shows demo
informaion refer to the page 23) DEMO (CM8330)
- Shows demo
USER EQ
Sets sound equalizer on your own. JUKE BOX
- Makes your favourites list.
EFFECT LEVEL - Switches on and off JUKE BOX.
Selects DJ effect level between low, middle, and
high. k Y/ /U
f DJ EFFECT Press this knob to (Play/Pause).
Press DJ EFFECT - Starts or pauses playback.
-select DJ effect mode. - Selects Stereo/Mono.
-Enters USER EQ setting mode and saves your Turn this knob clockwise or counterclockwise to
equalizer setting Y/U (Skip/Search).
Turn DJ EFFECT - Skips Fast backward or Forward.
- makes a sound on DJ effect mode. - Searches for a section within a track/file.
- Selects BASS, MIDDLE, and TREBLE when - Adjusts the sound level when setting USER EQ.
setting USER EQ.
l Disc tray
g Volume knob
m PORT. IN jack
Adjusts speaker volume.
MIC jack
MIC VOL.
1
Getting Started
c
d
b e
Getting Started
a
c
d
b e
1
Getting Started
b d
Remote • • • • • • a • • • • • •
1 (Power) : Switches the unit ON
d/M (Play/Pause) :
-- Starts or pauses playback.
control or OFF. -- Selects STEREO/MONO.
B (Open/Close) : Opens and SOUND EFFECT : Chooses sound
closes the disc tray. 1
impressions.
PRESET.FOLDER W/S :
Getting Started
AUTO DJ : Selects the AUTO DJ
-- Searches for a folder of MP3/ mode. (For more information refer
WMA files. When a CD/USB to the page 23)
containing MP3/WMA files in DELETE :
several folders is being played,
-- Deletes MP3/WMA files.
press PRESET.FOLDER W/S
to select the folder you want -- Deletes a song on JUKE BOX
to play. list.
-- Chooses a preset number for a • • • • • • c • • • • • •
radio station. 0 to 9 numerical buttons : Selects
FUNCTION : Selects the function numbered tracks, files, or preset
and input source. number.
MUTE @ : Mutes the sound. INFO : Sees informations about
VOL +/- : Adjusts speaker volume. your music. An MP3 file often
come with ID3 tag. The tag gives
TUNER MEMORY : the Title, Artist, Album or Time
-- Stores radio stations. information.
-- Deletes all the saved stations. REGION EQ : Chooses region
USB REC : USB direct recording. equalizer.
SLEEP : Sets the system to turn • • • • • • d • • • • • •
off automatically at a specified CLOCK : For setting the clock and
time. checking the time.
(Dimmer : The display window TIMER : With the TIMER function
will be darkened by half.) you can turn CD, USB play and
• • • • • • b • • • • • • TUNER reception on or off at a
REPEAT (MENU): Listens to desired time.
your tracks/files repeatedly or SET : Confirms the setting.
randomly. SMART DJ : Selects SMART DJ
Battery Installation TUNING-/+ : Selects the radio
mode. (For more information refer
to the page 22)
stations.
JUKE BOX :
C/V (Skip/Search) :
-- Selects JUKE BOX mode.
-- Skips Fast backward or
Forward. -- Makes your favorites list.
-- Searches for a section within a EFFECT LEVEL +/- : Adjusts
track/file. SMART DJ effect sound level.
Remove the battery cover on
Z ENTER :
the rear of the Remote Control,
and insert two (size R03(AAA)) -- Stops playback or recording.
batteries with 4 and 5 matched -- Cancels DELETE function.
correctly.
Connecting
Positioning the speakers
Speaker duct 20 cm 20 cm Speaker duct
yy The speaker ducts of subwoofer have to be faced
opposite the main unit. Otherwise it may result
in a malfunction of the main unit.
yy The subwoofer have to be placed at a distance
of about 20 cm from the main unit.
: Non-skid pad
1. Attach the non-skid pads to the right side of
subwoofer.
2. Lay the subwoofer down as the illustration
above.
Surround
speaker
Front
speaker
Stacking
board
Subwoofer
: Non-skid pad
3. Put the stacking board on the subwoofer.
4. Place the front and the surround speakers on
the stacking board firmly.
5. Attach the non-skid pads between the front and
the surround speakers for preventing scratchs.
CM8430
Color Speaker
Red FRONT R
Orange SUB WOOFER
White FRONT L
CM8330
Color Speaker
Red FRONT R
White FRONT L
Connecting
>>Caution
yy Make sure to connect the cables to
connectors tightly on the unit.
yy Make sure that the jacks and the speakers
are matched correctly.
AUX IN Connection
Connect an output of auxiliary device(Camcoder,
TV, Player, etc) to the AUX IN (L/R) connector.
2 If your device has only one output for audio(mono),
connect it to the left (white) audio jack on the unit.
Connecting
Portable cable
Connecting
FM antenna
,,Note
Removing the USB device from the unit :
1. Choose a different function/mode or
press Z ENTER on the remote control
or I on the unit twice in a row. AM antenna
2. Remove the USB device from the unit.
,,Note
yy To prevent noise pickup, keep the AM Loop
antenna away from the unit and other
components.
yy Be sure to fully extend the FM wire antenna.
20 Operating
Operating
File4
- DEL FILE? : Deletes file
- DEL FOLDER : Deletes folder
Folder2 - FORMAT? : Formats USB
Folder5 File11 2. To delete file/folder or format, press d/M on the
File12 remote control or press on the unit.
Folder6 File13 3. If you want to exit the current mode, press
File14 Z ENTER on the remote control or press I on
the unit.
File1
File2 >>Caution
yy Do not extract the USB device during
yy If there is no file in a folder, the folder will
operation. (play, delete, etc.)
not appear.
yy Regular back up is recommended to
yy Folders will be presented as the following
prevent data loss.
order :
ROOT FOLDER 1 FOLDER 3 FOLDER yy The delete function may not be supported
7 FOLDER 8 FOLDER 5 FOLDER 6 according to the USB status. (lock, etc.)
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
yy *ROOT : It is “ROOT” which is the first screen
you can see when a computer recognizes
the storage device.
Operating
RANDOM) on this mode.
1/2/3 direction in which you turn DJ
EFFECT. REPEAT ALL The music is
REPEAT (AUTO DJ played repeatedly
2. Turn DJ EFFECT clockwise or counterclockwise SEQUENTIAL) on this mode.
during playback.
To cancel it, press DJ EFFECT until “DJ EFFECT OFF”
appears on the display window.
,,Note
yy It is not supported on the AUTO DJ mode to
search for a section within a track/file or to
play repeatedly or randomly.
yy During AUTO DJ mode, it is not available to
press PRESET.FOLDER W/S on the remote
control or FOLDER on the unit.
yy If you move to other functions or stop the
music using I on the unit (or Z ENTER on
the remote control) on AUTO DJ mode,
AUTO DJ function will be disable.
yy AUTO DJ function is not supported in the
music file whose length is less than 60
seconds.
yy During recording, AUTO DJ function is not
available.
yy Only AUTO DJ SEQUENTIAL is selected when
played JUKE BOX list.
Operating
was made via Bluetooth® wireless technology. Your unit appears as “LG MINI(xx:xx)”.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
,,Note
XX:XX means the last four digits of BT
address. For example, if your unit has a BT
Bluetooth Profiles address such as 9C:02:98:4A:F7:08, you
will see “LG MINI(F7:08)” on your Bluetooth
In order to use Bluetooth wireless technology,
device.
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
3. Enter the PIN code.
A2DP (Advanced Audio Distribution Profile)
PIN code : 0000
4. When this unit is successfully connected with
your Bluetooth device, “PAIRED” will appear on
the display window and bluetooth indicator will
be lit up.
,,Note
Depending on the Bluetooth device type,
some device have a different pairing way.
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
,,Note
yy Sound from the main set can be distorted
if you raise the volume of Bluetooth device
up to two-thirds or more.
yy When you use the bluetooth function,
adjust the volume of a bluetooth device to
a proper level to listen to.
“BLUETOOTH” and “BT READY” appears on 1. Install “LG Bluetooth Remote” app through QR
the control panel. code. Use the scanning software to scan the QR
yy The electrical malfunction due to devices code.
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
yy When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
2. Tap an icon for installation.
yy If the gotten away of the distance between
3. Tap an icon for downloading.
Bluetooth and the unit, the sound quality
is lower and lower. The connection will ,,Note
disconnect when the space between the yy Make sure that your Bluetooth device is
Bluetooth and the unit gets out of the connected to the Internet.
operating range of Bluetooth.
yy Make sure that your Bluetooth device has a
yy The device with Bluetooth wireless scanning software application. If you don’t
technology is disconnected, if you turn off have one, download one from “Google
the main unit or put the device away from Android Market (Google Play Store)”.
the main unit more than 10 m.
yy Bluetooth connection will be disconnected
When the function changes to the others.
yy If the Bluetooth device is disconnected, you
should connect the Bluetooth device to
your unit.
Operating
yy If you use “LG Bluetooth Remote” app for
yy Make sure that your Bluetooth device is
operation, there would be some differences
equipped with “Google Android Market
between “LG Bluetooth Remote” app and
(Google Play Store)”.
the supplied remote control. Use the
supplied remote control as necessary.
yy Depending on the Bluetooth device, “LG
Bluetooth Remote” app may not work.
yy The connection you’ve made may be
disconnected if you select other application
or change the setting of the connected
device via “LG Bluetooth Remote” app. In
such a case, please check the connection
status.
Operating
While playing an MP3 file containing file In this case, move the microphone away
information, you can display the information by from the speaker or decrease the sound
pressing INFO. level by using the MIC VOL..
yy If sound through the microphone is
DEMO extremely loud, it may be distorted. In this
case, rotate MIC VOL. to minimum.
In the power off state, it demonstrates the function
on display window with a demo sound and a yy AUX-MIC function enables only your voice
display by pressing DEMO. to output.
To cancel the DEMO, press it again.
,,Note Switching on and off the
yy While DEMO, this unit will keep DEMO
status even if you unplug the power cord speaker light(For CM8530,
connection.
CM8430)
yy You can enjoy other functions during
the DEMO. Then the DEMO will pause to You can select various types of the speaker light by
temporary. pressing SPK Lighting / DEMO (CM8530 / CM8430)
- Without input key in 10 sec, the DEMO will on the unit.
play back automatically. To turn off the light, press SPK Lighting/DEMO
(CM8530 / CM8430) repeatedly until the light will
be turned off.
Operating
8. Press SET. 6. Adjust the volume level by using C/V
and press SET to save. The clock icon “(“
shows that the alarm is set.
7. Press TIMER button 2 times. You can check the
Setting the Clock through “LG setting status.
Bluetooth Remote” App
Install “LG Bluetooth Remote” app on your Android
,,Note
yy If you set the clock time, you can check the
device. (see page 26 - 27) time by pressing CLOCK even when the
Your unit’s clock will be automatically synchronized player is turned off.
with your device by activating Bluetooth yy If you set the clock time and alarm, you
connection through “LG Bluetooth Remote” app. can check the alarm icon “(“ by pressing
CLOCK even when the player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ and setting
informaiton by pressing TIMER even when
the unit is turned off.
yy To reset the time, press and hold CLOCK
or TIMER. And then follow the setting step
from 3.
repeatedly until dim off. JUKE BOX list, you can record it to USB.
(Refer to the page 24)
3. Press USB REC on the unit or USB REC on
the remote control.
- If you connect both USB1 and USB2, press
T to record to USB1 or press I to record to
USB2.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
Pausing recording
During recording, press USB REC on the
unit or USB REC on the remote control to pause
recording. Press it again to restart recording.
(TUNER/AUX/AUX-MIC/PORTABLE only)
Operating
- You can just record the music file.
This equipment should not be used for such
5. Press USB REC on the unit or USB REC on purposes.
the remote control to finish the setting. Be responsible
Respect copyrights
,,Note
yy It is not supported to record music stored
on bluetooth device.
yy You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/WMA,
CD Only)
yy During recording MP3/WMA, there is no
sound.
yy For stable recording, the output sound level
goes down on its own when you record
music from CD to USB.
yy You can only change volume level between
MIN and 10 during recording. It will be kept
3 even after recording.
yy When you stop recording during playback,
Operating
The other
AUDIO CD MP3/WMA
source*
Troubleshooting 35
Troubleshooting
Troubleshooting
yy The signal strength of the radio station is too weak.
Radio stations cannot be Tune to the station manually.
tuned in properly.
yy No stations have been preset or preset stations have been cleared (when
tuning by scanning preset channels).
Preset some radio stations, see page 28 for details.
yy The remote control is too far from the unit.
Operate the remote control within about 23 ft (7 m).
The remote control does yy There is an obstacle in the path of the remote control and the unit.
not work properly. Remove the obstacle.
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.
yy Check whether the speaker light cables are connected to the unit correctly.
No speaker light Connect the speaker light cables to the unit correctly.
(CM8530, 8430 only)
yy Check the speaker light effects by pressing SPK Lighting/DEMO.
36 Appendix
General specifications
General
Power requirements Refer to the main label
Power consumption Refer to the main label
Dimensions (W x H x D) 285 mm x 398 mm x 357 mm
Net Weight (Approx.) 8.2 kg
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity 5 % to 90 %
Bus Power Supply USB DC 5 V 0 500 mA
Inputs
Auxiliary Input 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
Microphone Input 6.3 mm jack
Portable Input 1.2 Vrms (3.5 mm stereo jack)
Tuner
FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz
AM Tuning Range 522 to 1 620 kHz, 520 to 1 710 kHz or 522 to 1 710 kHz
5
CD
Appendix
Amplifier
Model CM8530 CM8430 CM8330
Stereo mode 360 W x 2 (THD 10 %) 400 W x 2 (THD 10 %) 400 W x 2 (THD 10 %)
Front 360 W x 2 (THD 10 %) 400 W x 2 (THD 10 %) 400 W x 2 (THD 10 %)
Surround
Surround 180 W x 2 (THD 10 %)
mode
Subwoofer 360 W x 2 (THD 10 %) 400 W (THD 10 %)
Speakers specifications
Front speaker (CM8530, CM8430, CM8330)
Model CM8530 CM8430, CM8330
Type 2 Way 2 speaker
Impedance 6Ω
Rated Input Power 360 W 400 W
Max. Input power 720 W 800 W
Net Dimensions (W x H x D) 264 mm x 448 mm x 331 mm
Net Weight 8.9 kg
Appendix
Type 1 way 1 speaker
Impedance 6Ω
Rated Input Power 360 W 400 W
Max. Input power 720 W 800 W
Net Dimensions (W x H x D) 332 mm x 445 mm x 354 mm
Net Weight 10.5 kg
Trademarks and
Licenses
5
Appendix
Appendix
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.