Professional Documents
Culture Documents
OWNER’S MANUAL
SoundPlate™
LAP240
www.lg.com
Printed in China
2 Getting Started
1
CAUTION Install in accordance with the manufacturer’s
instructions.
RISK OF ELECTRIC SHOCK
DO NOT OPEN Slots and openings in the cabinet are provided for
Getting Started
This device is equipped with a portable battery or 11. Only use attachments/accessories specified by
accumulator. the manufacturer.
Safety way to remove the battery or the 12. Use only with the cart, stand, tripod, bracket, or
battery from the equipment: Remove the table specified by the manufacturer, or sold with
old battery or battery pack, follow the steps the apparatus. When a cart is used, use caution 1
in reverse order than the assembly. To prevent when moving the cart/apparatus combination
Getting Started
contamination of the environment and bring on to avoid injury from tip-over.
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to 13. Unplug this apparatus during lightning storms
excessive heat such as sunshine, fire or the like. or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
IMPORTANT SAFETY been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
(2) This device must accept any interference unauthorized change or modification is made.
received, including interference that may cause FCC RF Radiation Exposure Statement : This
undesired operation. equipment complies with FCC radiation exposure
NOTE: This equipment has been tested and found limits set forth for an uncontrolled environment.
to comply with the limits for a Class B digital device, This equipment should be installed and operated
pursuant to Part 15 of the FCC Rules. These limits are with minimum distance 20 cm between the
designed to provide reasonable protection against radiator and your body. End users must follow the
harmful interference in a residential installation. This specific operating instructions for satisfying RF
equipment generates, uses, and can radiate radio exposure compliance. This transmitter must not be
frequency energy and, if not installed and used co-located or operating in conjunction with any
in accordance with the instructions, may cause other antenna or transmitter.
harmful interference to radio communications. CAUTION: Regulations of the FCC and FAA prohibit
However, there is no guarantee that interference airborne operation of radio-frequency wireless
will not occur in a particular installation. devices because their signals could interfere with
If this equipment does cause harmful interference critical aircraft instruments.
to radio or television reception, which can be Responsible Party :
determined by turning the equipment off and LG Electronics USA, Inc. 1000 Sylvan Avenue
on, the user is encouraged to try to correct the Englewood Cliffs, NJ 07632
interference by one or more of the following TEL. : +1-800-243-0000
measures:
yy Reorient or relocate the receiving antenna.
yy Increase the separation between the equipment
and receiver.
yy Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
yy Consult the dealer or an experienced radio/TV
technician for help.
CAUTION : Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
Table of Contents
1
1 Getting Started
2 Safety Information
6 Unique features
6 Introduction
2
6 Accessories
7 Front panel
7 Rear panel
8 Remote control
10 Setting up the unit
3
2 Operating
13 Basic operations
13 – Optical input operation 4
13 – LG Sound Sync
14 – AUTO POWER On/Off
15 – Auto function change
16 Using Bluetooth technology
16 – Listening to music stored on the
Bluetooth devices
17 Using Bluetooth App
17 – Install “LG Bluetooth Remote” App
onto Your Bluetooth Device
18 – Activate Bluetooth with “LG Bluetooth
Remote” App
19 Setting sound effect
3 Troubleshooting
20 Troubleshooting
4 Appendix
21 Trademarks and licenses
22 Specifications
23 Maintenance
23 – Handling the unit
Bluetooth
Enjoys music from bluetooth device with simple
connection. Remote Control (1) Battery (1)
LG Bluetooth Remote
"LG Bluetooth Remote" is an App designed to
let you take control of some of LG’s latest Audio
devices.
Power cord (1) Optical cable (1)
Introduction
>>Caution
Indicates cautions for preventing possible damages
from abuse. Cable ties for arranging
cables (2)
Front panel
Getting Started
A Remote sensor
B LED indicator
You can check the current state of the unit by the color LED on it. Refer to the table below.
LED Color
Red Orange Green White
LED State
Off Disconnected power cord
Optical function LG sound sync
On Standby Bluetooth paired
selected (LG TV) paired
Sound effect Sound effect Sound effect
Blink
(Standard) is - (Music) is (Cinema) is
(Twice rapidly)
selected. selected. selected.
Blink LG sound sync
Booting Bluetooth ready -
(Twice per second) (LG TV) ready
Blink
Mute - - -
(Once per second)
Rear panel
A B CD
Remote control
1
Getting Started
,,Note
yy Once the unit is shut down to standby,
please wait several seconds before trying to
use remote again.
yy When you press any button on the remote
control, the red LED on the main unit blinks
twice. (Except 1(Power), SOUND EFFECT)
yy The red LED on Unit will be lit If the volume
level is adjusted between minimum to
maximum.
yy The color LED that indicates the current
function is lit up.
yy The red LED blinks twice rapidly when the
sound effect (Standard) is selected.
yy The green LED blinks twice rapidly when the
sound effect (Music) is selected.
yy The white LED blinks twice rapidly when the
sound effect (Cinema) is selected.
Battery installation 3. Put the battery cover on the remote control and
turn it clockwise to close.
>>Caution
Do not open the battery cover by using your
finger. Or else, your nail could break. 1
Getting Started
1. Turn the battery cover counterclockwise by
using a coin. Then remove the battery cover.
!Warning
yy DO NOT INGEST BATTERY. CHEMICAL BURN
HAZARD.
2. Insert and fix the battery with the minus (-) yy The battery used in this device may present a
facing in the same direction as the minus (-) on fire or chemical burn hazard if mistreated. Do
the battery compartment. not recharge, disassemble, incinerate, or heat
above 100 °C (212 °F). Replace the battery part
no. CR2025 only. Use of another battery may
present a risk of fire or explosion. Dispose of used
battery. Keep battery away from children. Do not
disassemble or dispose of in fire.
yy [The remote control supplied with] This product
contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead
+
sure your TV's specifications. Because this unit contains magnetic parts,
yy Weight color irregularity may occur on the TV
screen.
yy Do not put the other objects except a TV or
a monitor on the unit.
yy The unit must be set up on a stable and
horizontal surface.
yy Do not put any other object between the
unit and the supporting furniture when you
set up the unit.
,,Recommendation
It is recommended to set up the unit on a
sufficiently firm and horizontal surface.
Max. 18 kg
(39.7 lb) 1. Remove the protection caps for woofer from
the bottom of this unit.
Max. 270 mm
(10.6")
Max. 530 mm (20.8")
Getting Started
2. Arrange the cables as the below.
1. Open
3. Close
Operating
from below methods :
Refer to the TV's instruction manual for the details
-- Mute your TV.
of LG Sound Sync.
-- Select [Off ] on the TV sound setup menu
Make one of the following connections, depending
not to output the sound through the TV.
on the capabilities of your equipment.
-- Select [Optical output] on the TV sound
setup menu to listen to the sound through ,,Note
this unit. yy You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
1. Connect your TV to the unit by using an optical
synchronizes with the TV.
cable. (Refer to the pages 10 - 11.)
yy When the connections failed, make sure of
2. Turn on the unit by pressing 1 (Power) on the
the condition of the TV and power of it.
remote control.
yy Make sure of the condition of this unit and
3. Select OPTICAL function by using OPTICAL on
the connection in the cases below when
the remote control.
using LG Sound Sync.
Green LED on the unit is lit up and you can
-- Turned off the unit.
listen to the TV's sound.
-- Changing the function to the others.
,,Note -- Disconnecting the optical cable.
yy Set up the sound output of TV to listen to
the sound through this unit : -- Disconnecting the wireless connection
TV setting menu [ [Sound] [ [TV Sound caused by interference or a distance.
output] [ [External speaker (Optical)] yy The amount of time to turn off this unit is
yy Details of TV setting menu vary depending different depending on your TV when you
on the manufacturers or models of your TV. set AUTO POWER function to ON.
yy Volume controls differ slightly depending
on what you use among the supplied
remote control, LG TV's remote control or “LG
Bluetooth Remote” app.
Operating
When you turn on the external device connected
to this unit by an optical cable, this unit change the
function to optical. You can hear the sound from
your device.
Operating
medical equipment, a microwave or a
wireless LAN device. To enjoy more features, you are recommended to
download and install free “LG Bluetooth Remote”
yy This unit supports Bluetooth auto pairing. app.
However it does not operate in the case
below :
-- When you restart this unit.
Install “LG Bluetooth Remote”
-- When you return to Bluetooth function App onto Your Bluetooth
after using LG TV function. Device
yy The sound may be interrupted when There are two ways to install“ LG Bluetooth Remote”
the connection interfered by the other App onto Your Bluetooth Device.
electronic wave.
yy You cannot control the Bluetooth device Install “LG Bluetooth Remote” App
with this unit.
through QR code
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported. 1. Install “LG Bluetooth Remote” app through QR
code. Use the scanning software to scan the QR
yy Depending on the type of the device, code.
you may not be able to use the Bluetooth
function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc..
yy The more distant between the unit and
the bluetooth device, the lower the sound
quality becomes. 2. Tap an icon for installation.
yy Bluetooth connection will be disconnected 3. Tap an icon for downloading.
when the unit is turned off or the bluetooth
device gets far from the unit. ,,Note
yy When Bluetooth connection is yy Make sure that your Bluetooth device is
disconnected, connect the bluetooth device connected to the Internet.
to the unit again. yy Make sure that your Bluetooth device has a
yy When not connected the Bluetooth, orange scanning software application. If you don’t
LED is blinking. have one, download one from “Google
Android Market (Google Play Store)”.
4. Tap an icon for installation. supplied remote control. Use the supplied
5. Tap an icon for downloading. remote control as necessary.
Operating
Description
effect blinking
You can enjoy the
Standard Red sound without
equalizer effect.
You can enjoy
Music Green comfortable and
natural sound.
You can enjoy more
immersive and
Cinema White
cinematic surround
sound.
,,Note
yy In some of surround modes, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
yy You may need to reset the surround mode,
after switching the input, sometimes even
after the sound file changed.
Troubleshooting
PROBLEM CAUSE & CORRECTION
Check the details below and adjust the unit according to them.
yy With the unit connected with TV, change the AUDIO DIGITAL OUT setting on TV
When you feel the Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
output sound of the
yy With the unit connected with Player, change the AUDIO DIGITAL OUT setting on
unit is low.
Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or [BITSTREAM].
yy Change Audio DRC setting on Player setup menu to [OFF] state.
Depending on the type of the furniture where the unit is placed, you might hear a
slight noise from the furniture due to the dual subwoofers built within the product.
There is a noise on
the periphery of the yy Check the supporting furniture whether it is sufficiently firm and horizontal.
unit. yy However, if you still hear a noise, place a tablecloth between the unit and the
surface.
Trademarks and
licenses
Appendix
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
Specifications
General
Power requirements 120 V ~ 60 Hz
Power consumption 25 W
Dimensions (W x H x D) (560 x 54.5 x 320) mm (22" x 2.1" x 12.6") (With foot)
Net Weight (Approx.) 4.4 kg (9.7 lb)
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity 5 % to 90 %
Inputs
DIGITAL IN (OPTICAL IN) 3.3 V (p-p), Optical jack
Available Digital Input Audio
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Sampling Frequency
4 Amplifier
Total output 100 W
Appendix
Maintenance
Appendix
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.