Professional Documents
Culture Documents
Agitator Pumps (LODOS)
Agitator Pumps (LODOS)
NEW KTD A cast iron made, heavy-duty slurry pump employing the KTZ series as the base
NEW Tsurumi Agitator Pump KTD Series is a cast iron made, heavy-duty slurry pump
employing the KTZ Series as the base. An agitator is provided to assist smooth suction
of the pumping fluid. The side-flow, top-discharge design keeps the motor cooling even
if the pump is operated continuously with its motor exposed in air, and it makes the
pump easier to place in a confined space.
KTD Series is suitable for transferring or draining bentonite slurry used for slurry
drilling, draining slurry mixed water in civil engineering works or foundation works.
NEW
GPN A special-steel impeller and suction plate have greatly increased the pump’s life
• Transferring or draining bentonite slurry in slurry-assisted bored piling or diaphragm wall
construction.
• Draining water containing cement slurry, mud, and sand at a construction or civil engineering work.
Agitator • Draining aggregate wash water at a quarry or ore wash water at a mining.
• Collecting sediments at the grit chamber in a wastewater treatment plant.
• Transferring water containing iron scale in a steel work.
Agitator
The agitator mounted on the motor shaft-end facilitates efficient suction of the settled slurry,
sand, or mud.
Suction Plate
Suction Plate
A suction plate mechanism is adopted in the GPN series pumps. If the performance drops due to
wearing out of the suction plate, restoration of the performance is possible by replacing the suction
plate only. It will not be necessary to replace the whole suction cover part. For the GPN622 model,
it is possible to adjust the impeller clearance (to move the suctionplate closer to the impeller) by
(This illustrates Model GPN622) merely tightening or loosening six (6) bolts, by which the dropped performance can be restored.
Performance Curves
90 130
60 Hz 120 60 Hz
80
110
70 100
Si hre
G
90
GP
ng e
SZ
T
60
N6
le P h
GP
5
22
Ph as
-3
KT 80 N4
as e: K
7-
15
e: T
4S
D2 KT
N K V2
50 2.
K
0 D3
2- -50
70
15
3. GP
0
SK
N4
11
/N
60
40
K2
GS
KT
-2
HS
Z5
2S
V2
50 -37
D2
-6S
-8
HS
.5
30 K
5S
2.
4S
40
GP
KR
HS3
N3
30
5.5
S8
20
.75S
2 2L
KR
KR
20
-S
S2
K
KR
S2-
10
-10
S2
10
80
-15
0
0
0 0
0 20 40 60 80 100 120 140 160 180 200 220 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400
Specifications
MaximumCapacity
Urethane Rubber
Side Channel - Top
Running Water
Maximum Head
Model
Side Discharge
Weight (lbs.)
Hi - Chrome
Hi - Chrome
Water Jacket
Continuous
Ductile iron
Ductile iron
Ductile iron
115V
230V
208V
230V
460V
575V
Aluminum
Discharge
Diameter
Cast iron
Cast iron
Rubber
Height
(GPM)
Level
RPM
Steel
(In.)
(In.)
(ft.)
Your Dealer