Professional Documents
Culture Documents
(1) (2)
FD Grip Tan A Type Coupler is a high performance mechanical
connection system.
Both rebar ends are clamped together with couplers then couplers
are connected with a high tensile bolt.
Attachement Procedure: After screwing the connection bolt into (3)
the sleeve, turn the connection side until the edges of both
sleeves are in contact,the tighten with the prescribed torque.
APPLICATION
1. Column/Wall to Beam PROJECT ACHIEVEMENTs:
2. Column/Wall to Slab
1. Pondok Indah Mall Residence and Hotel
3. Beam to Beam
4. Top-Down Construction 2. Mass Rapid Transit (MRT)
5. Etc. 3. Light Rail Transit (LRT), Jabodetabek
4. JIEXPO Convention Centre and Theatre
5. Puri Matahari
Weldable Material
6. Puri Indah Financial Tower
7. PCPD SCBD Lot 10
8. Anandamaya Residence
9. Jakarta International Container Terminat (JICT)
10. MNC Media Tower Project
11. Asahi Mas Plant Blass AMG Construction
12. TOTO Building
13. Saint Carollus Hospital
14. Cinemaxx Theatre
Wall to Beam Top-Down Construction
15. Gempol-Sumbersuko Bridge
16. Central Java Coal Fired Power Plant Project, Batang
PRODUCT DIMENSION
(mm)
Dia. Screw Size D1 D2 L L1 L2 S Lsa
D13 M14x2.0 20.4 20.3 52 28 24 12.6 27
D16 M18x2.5 26.0 26.3 62 35 29 16.2 36
D19 M20x2.5 28.0 28.0 72 42 31 18.0 38
D22 M24x3.0 33.6 33.5 85 48 38 21.6 46
D25 M27x3.0 38.5 38.0 93 55 38 24.3 52
D29 M30x3.0 43.6 43.0 108 62 44 27.0 58
D32 M33x3.0 48.6 47.5 118 69 49 29.2 63
D35 M36x3.0 54.6 53.2 129 75 54 32.4 69
D38 M39x3.0 58.6 57.5 139 82 57 35.1 73
D41 M42x3.0 63.6 62.4 149 90 59 37.8 79
E TYPE FUJIBOLT INDONESIA
ATTACHMENT PROCEDURE
E-Type coupler is low cost type of coupler developed
particularly for Indonesian market. Combine clamped The processes of E-Type coupling are as follows:
The E-Type sleeve is processed and threaded at Fujibolt factory.
type with upset threading. The hydraulic machine is used to clamp the E-Type sleeve to the
Upset threading: Steel rebar is up-sized before rebar end.
APPLICATION
E-TYPE FEATURES:
1. Reliable replacement for overlapping connections.
2. Suitable with jumping/climbing formwork method.
3. Best for wall to beam/slab or column to beam/slab
connection.
4. Overcome difficulties connection due to the tight spacing
of steel bars.
5. Easy to install, no requirement of high skilled worker.
6. Coupler can be embedded in concrete.
Column to Beam
Wall to Beam
E TYPE FUJIBOLT INDONESIA
MACHINES TORQUE
Threading Machine
Set the torque wrench to the threaded rebar according to the specified
torque value. The marking position will change after applying the
torque. The torque value is specified in the table below. The torque
wrench specification can be seen in the table below.
s Torque value
Diamater D19 D22 D25 D29 D32 D35 D38 D41
Torque
80 130 180 240 320 410 500 540
Value, N・m
Marking on rebar
Clamping
RII-TYPE Dimension
D Gauge
Size l d L L1 D D gauge
D13 65.5 24.9 80.5 30.8 20.3 20.6
D16 64.0 31.3 78.7 30.0 26.3 26.7
D19 90.5 33.5 110.0 42.0 28.5 29.0
D22 100.0 39.5 119.8 47.0 33.3 33.9
D25 100.0 44.5 123.0 46.8 38.2 38.9
D29 116.0 50.3 142.8 54.3 43.2 44.0
D32 128.0 56.5 157.4 60.0 48.4 49.0
D36 140.0 63.0 172.2 65.6 53.6 54.6
-0 + not Rev 01
Tolerance ±2.0 -2.0, +0.5 -10%+25% -5%+ 2% - Unit : mm
specified
RII Type Installation References
Clamped Quality
www.fujibolt.com