Professional Documents
Culture Documents
Issue 01
Date 2013-09-18
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: support@huawei.com
Product Version
Product Name Product Version
MA5600T/MA5603T/MA5 V800R013C10
608T
MxU V800R313C10
ONT V300R013C10
iManager U2000 V200R001C00
Intended Audience
This document describes the product positioning and features, architecture, function, network
applications, device management, and technical specifications of the
MA5600T/MA5603T/MA5608T.
This document is intended for:
Network planning engineers
Installation and commissioning engineers
Field maintenance engineers
Network monitoring engineers
System maintenance engineers
Data configuration engineers
Application developers
Symbol Conventions
The following symbols may be found in this document. They are defined as follows.
Symbol Description
DANGER indicates a hazard with a high level or
medium level of risk which, if not avoided, could
result in death or serious injury.
WARNING indicates a hazard with a low level of
risk which, if not avoided, could result in minor or
moderate injury.
CAUTION indicates a potentially hazardous
situation that, if not avoided, could result in
equipment damage, data loss, performance
deterioration, or unanticipated results.
TIP indicates a tip that may help you solve a
problem or save time.
NOTE provides additional information to
emphasize or supplement important points of the
main text.
Update History
Updates between document issues are cumulative. Therefore, the latest document issue
contains all updates made in previous issues.
Contents
1 Product Positioning
MA5600T/MA5603T/MA5608T Positioning
The MA5600T/MA5603T/MA5608T, functioning as an integrated optical-copper access
equipment, provides the integrated broadband and narrowband access and FTTx optical
access services that feature high rate, high bandwidth, and high quality. It can function as an
OLT, MSAN, or IP DSLAM. The MA5600T is a large-capacity device, the MA5603T is a
medium-capacity device and the MA5608T is a small-capacity device.
Supports the 10G GPON and GPON access service. All the three can function as an
optical line terminal (OLT) in the GPON system, working with the optical network
terminal (ONT) or other optical network units (ONUs).
Supports the point-to-point (P2P) FE/GE optical access. The P2P board is mainly used
for cascading, and it can also provide users with P2P FTTH access by cooperating with
ONTs.
Provides the voice service solution based on the Session Initiation Protocol (SIP) and
H.248, supports the POTS port to implement the voice service, fax service, narrowband
modem service, and various supplementary services.
Provides the E1/N*64k private line service through the TDM SHDSL board. And
H802EDTB board supports the TDM SHDSL feature.
Supports broadband access services such as ADSL2+, VDSL2, and SHDSL, enhancing
the xDSL function.
In the upstream direction, the device is generally connected to the IP/MPLS network through
the Ethernet (GE/10GE) port.
Figure 1-1 shows the position of the device in a network.
Phone VoIP
H.248
Modem SIP Softswitch SHLR
SHDSL
CPE NGN
VDSL2
CPE
ADSL2+
CPE
IP/MPLS
MDU
GPON
BroadBand
IPTV Server
ONT
CSCF
P2P
IMS
Ethernet
MRP/MRC HSS
IP DSLAM MGCF
Connected to xDSL terminals and phones and used in the MSAN/DSLAM scenario
2 New Features
New boards and features added in the V800R013C10 version deliver greater benefits to
customers. This topic describes the major features and boards added in the version:
high-density point-to-point (P2P) access board OPGE, Layer 2 service processing board
SPUC, 32-channel G.SHDSL board SHGM, LLDP, 1588 adaptive clock recovery (ACR), and
GPON FTTH Y.1731. These new boards and features enhance the capabilities of the
MA5600T/MA5603T/MA5608T in terms of convergence, enterprise service access, and base
transceiver station (BTS) service access.
LLDP
The MA5600T/MA5603T/MA5608T supports Link Layer Discovery Protocol (LLDP). LLDP
can precisely discover the ports of network devices and the interconnection between devices.
By obtaining and integrating the LLDP local device information and neighbor device
information on each network element (NE), the NMS can generate a clear topology of the
entire network, along with detailed information such as the physical connections between
devices. Such information helps network operators monitor network status in real time and
quickly locate network faults, effectively improving network security and stability.
1588 ACR
The stratum-3 clock daughter board CKMD supports 1588v2 and 1588 ACR. 1588 ACR is
mainly applied to the scenario where the intermediate network is an asynchronous network
and it is unable to obtain clock information. 1588 ACR greatly facilitates clock information
obtaining.
3 Product Features
Optical Access
The MA5600T/MA5603T/MA5608T supports 10G GPON access, GPON access and P2P
access, which effectively meets requirements of various FTTx access applications.
Supports a split ratio of 1:128.
Support small form-factor pluggable (SFP) optical module of Class B+ or Class C+ and
XFP optical module, which can be used in different scenarios.
High-density 48 single-fiber bi-directional or 24 two-fiber bi-directional GE/FE P2P
optical access is supported.
Copper Access
The MA5600T/MA5603T/MA5608T supports multiple xDSL access and POTS access modes
and makes full use of existing copper cable resources to provide users with rich and flexible
network services. The retransmission and INM functions solve the line quality deterioration
problem caused by line bit errors and line noise, which ensures the line access quality.
The xDSL ports works with the ADSL terminal unit-remote end (ATU-R) or the VDSL
terminal unit-remote end (VTU-R), which can provides the highest-density 64 channels
of xDSL access and 48 channels of POTS access.
Far-end crosstalk (FEXT) is one of key factors affecting the performance and stability of
the VDSL2 system. The MA5603T supports the vectoring feature. Vectoring uses vectors
to solve FEXT of VDSL2 lines so as to improve bandwidth and performance of
multi-pair VDSL2 lines. It effectively decreases crosstalk for short-distance lines (shorter
than 1 km). The rate of a single VDSL line can be increased about 50%-90% within 800
m. Provides higher bandwidth and more types of services over existing VDSL2 lines
after the rate for a single VDSL2 user is increased.
NE Cascading
The MA5600T/MA5603T/MA5608T features powerful access and cascading capability. In
the downstream direction, it supports cascading to other devices through the GE or 10GE port.
In the upstream direction, it supports connection to the IP/MPLS network through the GE or
10GE port. It also supports dual homing to the BRAS through direct connection.
8.1 Performance and Capacity shows the backplane switching capacity, switching capacity of
control boards and the 10GE/GE cascading ports of the MA5600T/MA5603T/MA5608T.
Figure 3-2 MA5600T/MA5603T Typical networking for the Centric Management for GE Remote
Extended Subracks in FTTB or FTTC Scenarios
U2000
Independent
NE
Softswitch SHLR
VDSL2
VDSL2 NGN
MA5600T/
GE MA5603T
VDSL2
GE IP/MPLS
VDSL2
IPTV Server
CSCF
IMS
MRP/MRC HSS
MGCF
1588v2
Based on the synchronization requirements for different wireless systems and time
synchronization condition, IEEE defines IEEE 1588v2 high-precision time protocol (full
name: Precision Clock Synchronization Protocol for Networked Measurement and Control
Systems and abbreviation: PTP). The protocol supports time synchronization precision in the
sub-microsecond range.
In contrast to the GPS solution, IEEE 1588v2 solution achieves the same time precision but
has advantages in terms of cost, maintenance, and security. It has become the most popular
time transfer protocol in the industry because of the following advantages:
Space localization: The IEEE 1588v2 protocol is applicable to local area networks
supporting multicast messaging including but not limited to Ethernet.
High synchronization accuracy: The IEEE 1588 protocol enables time accuracy within
nanoseconds and administration-free systems. Thanks to the complete state machine and
various administration messages, the IEEE 1588 protocol minimizes manual
intervention.
Low cost: The IEEE 1588 protocol helps minimize the demand for network resources
and CPU resources and therefore enables low-cost applications.
Network transformation trend: IEEE 1588v2 is suitable for future integrated networks
over IP.
Intelligent Site
As large-scale fiber to the curb (FTTC) construction becomes popular, the number of outdoor
sites grows rapidly. The remote integrated sites are provisioned with cabinets, power systems,
temperature control units, and batteries. However, some maintenance works cannot be done
remotely by the remote maintenance technology. Maintenance personnel need to be assigned
to the sites, which results in low maintenance efficiency and high costs. This feature is
introduced to solve this issue.
When the MA5600T/MA5603T is configured with the enhanced service management unit
(SMU) power system, the following feature items are supported: Intelligent property
management for the key components (including the cabinet, power system, temperature
control unit, and battery) on the site and Intelligent floating charging management for
batteries on the site.
Supports three queue scheduling modes: priority queue (PQ), weighted round robin
(WRR), and PQ+WRR.
Supports the following QoS capabilities based on the flow rule:
− Packet filtering
− Redirect
− Mirror
− Traffic statistics collection
− Traffic shaping
− Bandwidth control
− Priority tag
Supports hierarchical quality of service (HQoS), which guarantees the multi-service
bandwidths for multiple users: The first level guarantees the user bandwidths, and the
second level guarantees the bandwidths for the services of each user. This ensures that
the guaranteed bandwidths absolutely pass and the burst bandwidths pass fairly.
IPv6
IPv6 radically solves the problem of IP address shortage. Moreover, IPv6 has the following
advantages: It is easy to deploy, compatible with various applications, easy for IPv4 networks
to transit to IPv6 networks.
Supports the IPv6 address management and assignment.
Supports the IPv6 stack and IPv6 host function.
Supports the IPv6 route.
Supports the IPv6 QoS and security, guarantee the security of the IPv6 network.
Supports the IPv6 layer 2 transparent transmission.
Supports the IPv6 multicast. By using IPv6 multicast technologies, the network device
can manage, control, and forward IPv6 video services and in this way meets carriers'
requirements for provisioning IPv6 video services.
4 Product Architecture
4.1.1 Cabinet
Appearance of the N63E-22 Cabinet
This topic provides the appearance of the N63E-22 cabinet.
The N63E-22 cabinet is an ETSI 300 mm middle standing pillar cabinet of NC purple grey.
The N63E-22 cabinet houses the MA5600T ETSI cabinet and MA5608T chassis.
The N63E-22 cabinet consists of the rack (main frame), a front door, a rear panel fixed by
screws, and side panels on the left and right sides.
The door of the N63E-22 cabinet is removable and the top of the cabinet has the grounding
point. All N63E-22 cabinets have the same key for the front door.
Figure 4-2 Configuration of the N63E-22 cabinet installed with one ETSI subrack
82 JTM
JTD
1
JTD JTA JAC
79
SW 1 SW2 SW3 SW4 SW 1 SW2 SW3 SW4 SPDALM JAK JTD 3
7
3 JTS CO
JTA
1 M 3
4
38 FAN
STATUS
PRTE GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD X2CS
SCUN SCUN
RUN ALM
ALARM RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN LINK ACT
ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM
BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY 0
ACT ACT 1
NEG(-)
PON PON PON PON PON PON PON PON RESET RESET PON PON PON PON PON PON PON PON
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
RTN(+) 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3
CON
CON
4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5
33
6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7
TX0
RX0
ETH
ETH
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ESC
ESC
PRTE
Service subrack
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
ALARM
TX1
RX1
LINK A CT LINK ACT
0 0
NEG(-)
2 2 2 2 2 2 2 2 1 1 2 2 2 2 2 2 2 2
2 2
RTN(+) 3 3
(450 mm)
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
TX 0 TX 0
RX 0 RX0
X2CS
RUN ALM
CITD LINK ACT
TX 1 TX 1
RX 1 RX1
0
RUN
MIN
MAJ
26
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
IN0
TX 2 TX 2
RX 2 RX2
IN1
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
BITS/TOD
TX0
OUT
RX0
TX 3 TX 3
RX 3 R X3
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
ET H COM
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
TX1
ALM
RX1
21
20
19
18 Cabling teeth (100 mm)
17
In Figure 4-3, the filled holes are for floating nuts to fasten subracks.
For the I-type or C3-type PDU, use installation holes 79 and 82; for the B-type PDU, use installation
holes 79 and 81.
The cabinet can also support an additional service subrack. In this case, it is recommended that the
air deflector (if not configured) be configured.
Figure 4-3 Configuration of the N63E-22 cabinet installed with two ETSI subracks
82 JTM
JTD
1
JTD JTA JAC
79
SW 1 SW2 SW3 SW4 SW 1 SW2 SW3 SW4 SPDALM JAK JTD 3
7
3 JTS CO
JTA
1 M 3
4
PRTE GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD X2CS
SCUN SCUN
RUN ALM
ALARM RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN LINK ACT
ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM
0
BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY
ACT ACT 1
NEG(-)
PON PON PON PON PON PON PON PON RESET RESET PON PON PON PON PON PON PON PON
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
RTN(+) 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3
CON
CON
71
4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5
6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7
TX0
RX0
ETH
ETH
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ESC
ESC
PRTE
Service Subrack
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
ALARM
TX1
RX1
LINK A CT LINK ACT
0 0
NEG(-) 2 2 2 2 2 2 2 2 1 1 2 2 2 2 2 2 2 2
2 2
RTN(+) 3 3
(450 mm)
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
TX 0 TX 0
RX 0 RX0
X2CS
RUN ALM
CITD LINK ACT
TX 1 TX 1
RX 1 RX1
0
RUN
MIN
MAJ
64
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
IN0
TX 2 TX 2
RX 2 RX2
IN1
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
BITS/TOD
TX0
OUT
RX0
TX 3 TX 3
RX 3 R X3
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
ET H COM
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
TX1
ALM
RX1
59
58
57
56 Cabling teeth (100 mm)
55
42
Air deflector (150 mm)
39
38 FAN
STATUS
PRTE GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD X2CS
SCUN SCUN
RUN ALM
ALARM RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN LINK ACT
ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM
BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY 0
ACT ACT 1
NEG(-)
PON PON PON PON PON PON PON PON RESET RESET PON PON PON PON PON PON PON PON
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
RTN(+) 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3
CON
CON
4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5
33 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7
TX0
RX0
ETH
ETH
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ESC
ESC
PRTE
Service Subrack
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
ALARM
TX1
RX1
LINK ACT LINK A CT
0 0
NEG(-)
2 2 2 2 2 2 2 2 1 1 2 2 2 2 2 2 2 2
2 2
RTN(+) 3 3
(450 mm)
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
TX 0 TX 0
RX 0 RX 0
X2CS
RUN ALM
CITD LINK ACT
TX 1 TX 1
RX 1 RX 1
0
RUN
MIN
MAJ
26
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
IN0
TX 2 TX 2
RX 2 RX 2
IN1
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
BITS/TOD
TX0
OUT
RX0
TX 3 TX 3
R X3 RX 3
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
ET H COM
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
TX1
ALM
RX1
21
20
19
18 Cabling teeth (100 mm)
17
In Figure 4-3, the filled holes are for floating nuts to fasten subracks.
For the I-type or C3-type PDU, use installation holes 79 and 82; for the B-type PDU, use installation
holes 79 and 81.
In Figure 4-3, the air deflector is included in the standard configuration.
Figure 4-4 Configuration of the N63E-22 cabinet installed with one ETSI subrack and one SPL
subrack
82 J TM
J TD
1
J TD J TAJ AC
79
J TA
1 M 3
4
PRTE ADPD ADPD ADPD ADPD ADPD ADPD ADPD ADPD ADPD ADPD ADPD ADPD ADPD ADPD ADPD ADPD X2CS
SCUN SCUN
RUN ALM
RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN
A LARM RUN RUN LINK ACT
ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM
ALM ALM
BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY 0
ACT ACT 1
NEG(-)
RESET RESET
RTN(+)
CON
CON
71 TX0
RX0
ETH
ETH
ESC
ESC
PRTE
Service subrack
xDSL1
xDSL1
xDSL1
xDSL1
xDSL1
xDSL1
xDSL1
xDSL1
xDSL1
xDSL1
xDSL1
xDSL1
xDSL1
xDSL1
xDSL1
xDSL1
A LARM
TX1
RX1
LIN K A CT LIN K A CT
0 0
NEG(-) 1 1
2 2
RTN(+) 3 3
TX 0
RX0
TX 0
RX 0
X2CS
RUN ALM
(450 mm)
CITD
TX 1 TX 1
LINK ACT
RX1 RX 1
0
RUN
MIN
MAJ
64
xDSL 0
xDSL 0
xDSL 0
xDSL 0
xDSL 0
xDSL 0
xDSL 0
xDSL 0
xDSL 0
xDSL 0
xDSL 0
xDSL 0
xDSL 0
xDSL 0
xDSL 0
xDSL 0
IN0
TX 2 TX 2
RX2 RX 2
IN1
BITS /TOD
TX0
OUT
RX0
TX 3 TX 3
RX3 RX 3
ET H COM
TX1
ALM
RX1
59
58 SPPL SPPL SPPL SPPL SPPL SPPL SPPL SPPL SPPL SPPL SPPL SPPL SPPL SPPL SPPL SPPL
xD SL1
xD SL1
xD SL1
xD SL1
xD SL1
xD SL1
xD SL1
xD SL1
xD SL1
xD SL1
xD SL1
xD SL1
xD SL1
xD SL1
xD SL1
xD SL1
xDSL0
xDSL0
xDSL0
xDSL0
xDSL0
xDSL0
xDSL0
xDSL0
xDSL0
xDSL0
xDSL0
xDSL0
xDSL0
xDSL0
xDSL0
xDSL0
53
LINE0
LINE0
LINE0
LINE0
LINE0
LINE0
LINE0
LINE0
LINE0
LINE0
LINE0
LINE0
LINE0
LINE0
LINE0
LINE0
LINE1
LINE1
LINE1
LINE1
LINE1
LINE1
LINE1
LINE1
LINE1
LINE1
LINE1
LINE1
LINE1
LINE1
LINE1
48
PSTN0
PSTN0
PSTN0
PSTN0
PSTN0
PSTN0
PSTN0
PSTN0
PSTN0
PSTN0
PSTN0
PSTN0
PSTN0
PSTN0
PSTN0
PSTN0
P ST N1
P ST N1
P ST N1
P ST N1
P ST N1
P ST N1
P ST N1
P ST N1
P ST N1
P ST N1
P ST N1
P ST N1
P ST N1
P ST N1
P ST N1
P ST N1
43
42
41
40 Cabling teeth (100 mm)
39
In Figure 4-4, the filled holes are for floating nuts to fasten subracks.
For the I-type or C3-type PDU, use installation holes 79 and 82; for the B-type PDU, use installation
holes 79 and 81.
Figure 4-5 N63E-22 cabinet installed with the OLT and OLS
82 JTM1
JTD1
ON ON ON ON ON ON ON ON
JAB1 JTD4
JTA2
OFF OFF OFF OFF OFF OFF OFF OFF JAK1 JTD5
JAK2 JTD6
JTA3
SPD
79
SW1 SW2 SW3 SW4 SW1 SW2 SW3 SW4 JAK3 JTD7
ALM
JTS1 COM3
JTA4
PRTE GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD GPBD X2C S
SCUN SCUN
RUN ALM
A LARM RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN RUN LINK ACT
ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM
0
BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY
ACT ACT 1
NEG (-)
PON PON PON P ON P ON P ON P ON P ON RESET RESET PON PON PON PON PON PON PON P ON
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
RTN(+) 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3
CON
CON
71 4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
4
6
5
7
T X0
RX0
ETH
ETH
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ESC
ESC
PRTE
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
A LARM
T X1
RX1
LIN K A CT LINK ACT
0 0
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
T X0 TX 0
R X0 RX0
X2C S
RUN ALM
LINK ACT
T X1 TX 1
R X1 RX1
0
64
1
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
TX 2 T X2
R X2 RX2
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
T X0
RX0
T X3 TX 3
RX3 R X3
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
T X1
RX1
59
58
57 Optical fiber trough (75 mm)
Empty (75 mm)
51
50
Optical fiber trough (75 mm)
Empty
(25 mm)
48
47
OFMS-1x64 (125 mm)
45
44
In Figure 4-5, the filled holes are for floating nuts to fasten subracks.
The OFMS-1*8, FTU, and S2318 shown in Figure 4-5 are required when the cabinet functions as a
master cabinet and they need to be installed onsite. For details, see iManager N2510 Line Assurance
System.
Figure 4-6 Configuration of the N63E-22 cabinet installed with one MA5608T
Figure 4-7 Configuration of the N63E-22 cabinet installed with two MA5608T
In Figure 4-7 and Figure 4-7, the filled holes are for floating nuts to fasten subracks.
For the I-type or C3-type PDU, use installation holes 79 and 82; for the B-type PDU, use installation
holes 79 and 81.
The cabinet can also support an additional service subrack. In this case, it is recommended that the
air deflector (if not configured) be configured.
The N66E-18 cabinet is a dual-standard 600 mm cabinet of NC purple grey. One side
complies with IEC and the other side complies with ETSI.
The N66E-18 cabinet houses the MA5600T ETSI/IEC cabinet and MA5603T chassis.
The N66E-18 cabinet consists of the rack (main frame), a front door, a rear door, and side
panels on the left and right sides.
Doors of the N66E-18 cabinet are removable and the top of the cabinet has the grounding
point. All N66E-18 cabinets have the same keys for the front and rear doors.
The MA5600T ETSI subrack is installed on the ETSI side of the cabinet.
Figure 4-9 Configuration of the N66E-18 cabinet installed with two ETSI subracks
In Figure 4-9, the filled holes are for floating nuts to fasten subracks.
The I-type PDU is used for the DC power supply.
Cabinet installation against the wall or back-to-back cabinet installation is not supported.
When high-density boards are configured, cables in some areas are close to the air exhaust vents of
the ETSI subrack. In this case, to ensure smooth ventilation, no cabling is allowed at least 1 U space
around the air exhaust vents.
DC-powered Cabinet with One ETSI Subrack and One SPL Subrack (MA5600T)
Figure 4-10 shows the configuration of the N66E-18 cabinet installed with one ETSI subrack
and one SPL subrack.
Figure 4-10 Configuration of the N66E-18 cabinet installed with one ETSI subrack and one SPL
subrack
In Figure 4-10, the filled holes are for floating nuts to fasten subracks.
The I-type PDU is used for the DC power supply.
Cabinet installation against the wall or back-to-back cabinet installation is not supported.
Figure 4-11 Configuration of the N66E-18 cabinet installed with two ETSI subracks
In Figure 4-11, the filled holes are for floating nuts to fasten subracks.
The EPS75-4815A power supply provides only two 40 A inputs. Therefore, only one power board is
allowed in each of the two ETSI subracks.
In the range of 90 V AC to 175 V AC, the output current of the EPS75-4815AF power system
decreases linearly, limited within a specified range. In areas with 110 V power supply, dual-live-wire
input is recommended. When 110 V single-live-wire input is used, the output power of the
EPS75-4815AF power system reduces to half (maximum: 1600 W) of that in 220 V. In this case,
only one subrack is allowed in the cabinet.
When high-density boards are configured, cables in some areas are close to the air exhaust vents of
the ETSI subrack. In this case, to ensure smooth ventilation, no cabling is allowed at least 1 U space
around the air exhaust vents.
Cabinet installation against the wall or back-to-back cabinet installation is not supported.
AC-powered Cabinet with One ETSI Subrack (MA5600T, with a 100 AH Battery
Group)
Figure 4-12 shows the configuration of the N66E-18 cabinet installed with one ETSI subrack.
Figure 4-12 Configuration of the N66E-18 cabinet installed with one ETSI subrack
In Figure 4-12, the filled holes are for floating nuts to fasten subracks.
Two power cables are configured for the ETSI subrack by default.
Only this configuration is able to provide the battery group, and at most 100 AH is supported.
In the range of 90 V AC to 175 V AC, the output current of the EPS75-4815AF power system
decreases linearly, limited within a specified range. In areas with 110 V power supply, dual-live-wire
input is recommended. When 110 V single-live-wire input is used, the output power of the
EPS75-4815AF power system reduces to half (maximum: 1600 W) of that in 220 V. In this case,
only one subrack is allowed in the cabinet.
Cabinet installation against the wall or back-to-back cabinet installation is not supported.
AC-powered Cabinet with One ETSI Subrack and One SPL Subrack (MA5600T)
Figure 4-13 shows the configuration of the N66E-18 cabinet installed with one ETSI subrack
and one SPL subrack.
Figure 4-13 Configuration of the N66E-18 cabinet installed with one ETSI subrack and one SPL
subrack
In Figure 4-13, the filled holes are for floating nuts to fasten subracks.
Two power cables are configured for the ETSI subrack by default.
In the range of 90 V AC to 175 V AC, the output current of the EPS75-4815AF power system
decreases linearly, limited within a specified range. In areas with 110 V power supply, dual-live-wire
input is recommended. When 110 V single-live-wire input is used, the output power of the
EPS75-4815AF power system reduces to half (maximum: 1600 W) of that in 220 V. In this case,
only one subrack is allowed in the cabinet.
Cabinet installation against the wall or back-to-back cabinet installation is not supported.
Figure 4-14 Configuration of the N66E-18 cabinet installed with two MA5603T chassis
In Figure 4-14, the filled holes are for floating nuts to fasten chassis.
When all the service slots in the chassis are installed with the VDSL, combo, or PON boards, one
chassis is allowed in the cabinet.
Cabinet installation against the wall or back-to-back cabinet installation is not supported.
Figure 4-15 Configuration of the N66E-18 cabinet installed with two MA5603T chassis
In Figure 4-15, the filled holes are for floating nuts to fasten chassis.
When all the service slots in the chassis are installed with the VDSL, combo, or PON boards, one
chassis is allowed in the cabinet.
In the range of 90 V AC to 175 V AC, the output current of the EPS75-4815AF power system
decreases linearly, limited within a specified range. In areas with 110 V power supply, dual-live-wire
input is recommended. When 110 V single-live-wire input is used, the output power of the
EPS75-4815AF power system reduces to half (maximum: 1600 W) of that in 220 V. In this case,
only one chassis is allowed in the cabinet.
Cabinet installation against the wall or back-to-back cabinet installation is not supported.
The N66-22 cabinet consists of the rack (main frame), a front door, a rear panel fixed by
screws, and side panels on the left and right sides.
The door of the N66-22 cabinet is removable and the top of the cabinet has the grounding
point. All N66E-22 cabinets have the same key for the front door.
Figure 4-17 Configuration of the N66-22 cabinet installed with two service shelves
138
Empty (1U)
134
131
O
N
O F
F
S W 1
O
N
O F
F
S W 2
O
N
O F
F
S W3
P G N D
R T N 1
(+ )
R T N
2 (+ )
N E G 1 (- )
N E G 2 (- )
DC PDU(2U)
Empty (1U)
124 STA TU S
FAN
PR T E G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D X2C S
SC U N SC U N
RUN ALM
ALA RM RUN RU N RU N R UN RUN RUN RU N R UN RUN RUN RUN RUN RUN RU N R UN R UN RUN RUN L INK AC T
ALM ALM ALM ALM ALM ALM ALM ALM A LM A LM ALM ALM ALM ALM ALM ALM ALM ALM
BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY 0
A CT A CT 1
NEG(-)
P ON P ON P ON P ON PON P ON P ON P ON RE S E T RE S E T P ON PON P ON P ON P ON PON PON P ON
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
117
RTN(+) 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3
C ON
C ON
4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5
6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7
T X0
RX 0
ETH
ETH
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ES C
ES C
PR T E
Service Subrack2(10U)
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
ALA RM
T X1
RX 1
L IN K A CT L IN K A CT
0 0
NEG(-)
2 2 2 2 2 2 2 2 1 1 2 2 2 2 2 2 2 2
2 2
RTN(+) 3 3
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
TX 0 TX 0
RX0 RX0
X2C S
RUN ALM
C IT D L INK AC T
TX 1 TX 1
RX1 RX1
106
0
RUN
MIN
MAJ
1
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
IN0
TX 2 TX 2
RX2 RX2
IN1
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
BITS /TOD
T X0
OUT
RX 0
TX 3 TX 3
RX3 RX3
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
ET H COM
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
T X1
ALM
RX 1
99
96
94
Cabling teeth(3U)
90
88
Empty(13U)
46 STA TU S
FAN
PR T E G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D G PB D X2C S
SC U N SC U N
RUN ALM
ALA RM RUN RU N RU N R UN RUN RUN RU N R UN RUN RUN RUN RUN RUN RU N R UN R UN RUN RUN L INK AC T
ALM ALM ALM ALM ALM ALM ALM ALM A LM A LM ALM ALM ALM ALM ALM ALM ALM ALM
BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY BSY 0
A CT A CT 1
NEG(-)
39
P ON P ON P ON P ON PON P ON P ON P ON RE S E T RE S E T P ON PON P ON P ON P ON PON PON P ON
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
RTN(+) 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3 2 3
CON
CON
4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5 4 5
6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6 7
T X0
RX 0
ET H
ET H
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ESC
ESC
PR T E
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
ALA RM
T X1
RX 1
L IN K A CT L IN K A CT
0 0
NEG(-) 2 2 2 2 2 2 2 2 1 1 2 2 2 2 2 2 2 2
2 2
Service Subrack1(10U)
RTN(+) 3 3
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
TX 0 TX 0
RX0 RX0
X2C S
RUN ALM
C IT D L INK AC T
TX 1 TX 1
RX1 RX1
28
0
RUN
MI N
MA J
1
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
IN0
TX 2 TX 2
RX2 RX2
IN1
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
BITS/TOD
T X0
OUT
RX 0
TX 3 TX 3
RX3 RX3
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
ET H COM
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
21
T X1
ALM
RX 1
18
16
Cabling teeth(3U)
12
10
Empty(3U)
In Figure 4-17, the filled holes are for floating nuts to fasten subracks.
4.1.2 Subrack
This topic provides the appearance and configuration of the subrack.
Fan tray
21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Power
G
I
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Control board
Control board
22 U
Power
20
0
G G
P I
I U
O
Control board
SCUB – – – – Super 9, 10
Control
SCUN – – – – Unit Board
SCUF – – – –
SCUH – – – –
Service board
ADKM √ × √ × 64-port 1-8,
ADSL2+ 11-18
Service
Board
ADPD √ √ √ × 64-port
ADSL2+
over POTS
Service
Board
ADPE √ √ √ × 64-port
ADSL2+
over POTS
Service
Board
ADPM √ √ √ × 64-port
ADSL2+
over POTS
Service
Board
ADQD √ √ √ × 64-port
ADSL2+
over ISDN
Service
Board
ASPB √ H808ASP √ × 64-port
B:√ VOIP
H809ASP Subscriber
B:× Board
CAME √ × √ × 48-port
ADSL2+&
POTS
Combo
Board
CSPA × × √ √ CESoP
VCMM √ √ √ × 48-port
VDSL2
over POTS
Service
Board
VDJM √ × √ × 48-port
VDSL2
over ISDN
Service
Board
VDMF √ √ √ × 48-port
VDSL2
over POTS
Service
Board
VDNF √ √ √ × 48-port
VDSL2
over ISDN
Service
Board
VDPD √ √ √ × 64-port
VDSL2
over POTS
Service
Board
VDPE √ × √ × 64-port
VDSL2
over POTS
Service
Board
VDPM √ √ √ × 64-port
VDSL2
over POTS
Service
Board
VDQM √ √ √ × 64-port
VDSL2
over ISDN
Service
Board
VDRD √ √ √ × 24-Port
VDSL2
over POTS
Service
Board
To facilitate the cabling, it is recommended that you install the TOPA board from slot 18 to left.
Fan tray
19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Power
G
I
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Service board
Control board
Control board
20 U
Power
18
0
G G
P I
I U
O
Control board
SCUB – – – Super Control 7 and 8
Unit Board
SCUN – – –
SCUF – – –
Service board
ADKM √ × √ 64-port 1-6,
ADSL2+ 9-16
Service Board
ADPD √ √ √ 64-port
ADSL2+ over
POTS Service
Board
ADPE √ √ √ 64-port
ADSL2+ over
POTS Service
Board
ADPM √ √ √ 64-port
ADSL2+ over
POTS Service
Board
ADQD √ √ √ 64-port
ADSL2+ over
ISDN Service
Board
ASPB √ H808ASPB: √ √ 64-port VOIP
H809ASPB: × Subscriber
Board
CAME √ × √ 48-port
ADSL2+&PO
TS Combo
Board
CSPA × × √ CESoP
Service
Process Board
CVME √ √ √ 48-port
VDSL2&POT
S Combo
Board
DSRD √ √ √ 32-port ISDN
Digital
To facilitate the cabling, it is recommended that you install the TOPA board from slot 16 to left.
64 15 48 7 64 32 32 16 16 -
63 47 31 15
62 14 46 6 30 17 14 -
61 45 29 13
60 13 44 5 28 18 12 -
59 43 27 11
58 12 42 4 26 19 10 -
57 41 25 9
56 11 40 3 24 20 8 -
55 39 23 7
54 10 38 2 22 21 6 -
53 37 21 5
52 9 36 1 20 22 4 -
51 35 19 3
50 8 34 0 18 23 2 -
49 33 17 1
64 39 48 31 64 32 32 40 16 -
63 47 31 15
62 38 46 30 30 41 14 -
61 45 29 13
60 37 44 29 28 42 12 -
59 43 27 11
58 36 42 28 26 43 10 -
57 41 25 9
56 35 40 27 24 44 8 -
55 39 23 7
54 34 38 26 22 45 6 -
53 37 21 5
52 33 36 25 20 46 4 -
33 1
51 35 19 3
50 32 34 24 18 47 2 -
49 33 17 1
Fan tray
Fan tray
Table 4-6 lists the boards that can be configured in the MA5603T chassis.
Control board
SCUB – – – – Super 6 and 7
Control Unit
SCUN – – – – Board
SCUF – – – –
SCUH – – – –
Service board
ADKM √ × √ × 64-port 0-5
ADSL2+
Service
Board
ASPB √ H808ASP √ × 64-port
B: √ VOIP
H809ASP Subscriber
B: × Board
ADPD √ √ √ × 64-port
ADSL2+
over POTS
Service
Board
ADPE √ × √ × 64-port
ADSL2+
over POTS
Service
Board
ADPM √ √ √ × 64-port
ADSL2+
over POTS
Service
Board
ADQD √ √ √ × 64-port
ADSL2+
over ISDN
Service
Board
DSRD √ √ √ × 32-port
ISDN Digital
Subscriber
Board
CAME √ × √ × 48-port
ADSL2+&P
SHLM √ √ √ × 16-port
SHDSL.bis
Service
Board
H802E √ × √ √ 16 port
DTB SHDSL and
16 port E1
Service
Board
ETHB √ √ √ √ Ethernet
Service
Access
Board
SPUA × × √ √ Service
Process
Board
SPUB √ √ √ √ MPLS
service
Process Unit
Board
SPUC × × √ √ Service
Process
Board
SPUF × × √ √ Multifunctio
nal service
Process
Board
TOPA × × √ √ TDM Traffic
over PSN
Board
XGBC × × √ √ 4-port 10G
GPON OLT
Interface
Board
0 Service board
Table 4-7 list the boards that can be configured in the MA5608T chassis.
The MCUD and MCUD1 control boards support the same service boards and power boards.
The following table provides the union of boards supported by the MA5600T/MA5603T/MA5608T.
Not all these boards listed in the following table can be supported by one of the MA5600T series
devices. For more information about the devices' support for the boards, see the Typical
Configuration of each subrack or chassis.
All the boards listed in the following table support -48 V and -60 V inputs. This topic uses only the
-48 V input as an example.
For more details about the function of the boards, please query the Hardware Description or the
Feature Description.
Overview
The part within the dashed border in Figure 4-32 indicates the software architecture of the
MA5600T/MA5603T/MA5608T.
Serial port
Inband / Outband connection Inband / Outband
Host software
Board software
Board software 1 Board software 2 ...... N
Board Software
The board software runs on the service board, interface board, and certain power interface
boards to provide the following functions:
Board service management
Data management
Alarm management
Driving and diagnosis
Host Software
The host software of the MA5600T/MA5603T/MA5608T consists of four planes running on
the control board, as shown in Figure 4-33.
5 Product Functions
Classification Feature
Access features 10G GPON access
GPON access
P2P access
ADSL/ADSL2/ADSL2+ access
VDSL2 access (supporting vectoring)
ATM SHDSL/EFM SHDSL access
TDM SHDSL access
Broadband Layer 2 features MAC address management
MAC address learning
VLAN attribute management
Classification Feature
Service stream processing
Layer 2 forwarding policy
Traffic classification
VLAN switching policy
Bridging
QoS Priority processing
Traffic management
ACL policy
Congestion management
HQoS
Multicast PIM-SSM
IGMP snooping
IGMP proxy
Multicast VLAN management
Multicast program management
Multicast user management
Multicast CAC
VPLS multicast
IPv6 IPv6 basic feature
IPv6 QoS
IPv6 Layer 2 forwarding
BGP4+
OSPF v3
Network protection features ERPS
MSTP
RRPP
Smart link and monitor link
Inter-board aggregation
Ethernet link aggregation (through the LACP protocol)
BFD
STM-1 port protection switching
Redundancy protection
GPON Type C
MPLS Basic MPLS functions
MPLS RSVP-TE
MPLS OAM
Graceful restart (GR) function of the LDP, RSVP-TE,
and PW
As a P device
Classification Feature
MPLS PW traffic label
VPLS
Layer 3 features VLAN Layer 3 interface
ARP
ARP proxy
DHCP relay
DHCP option 60
Static routing
RIP dynamic routing
OSPF dynamic routing
IS-IS dynamic routing
BGP dynamic routing
DHCP proxy
ECMP
VRF
VRRP snooping
Layer 2 tunnel emulation TDM PWE3
technology ATM PWE3
ETH PWE3
Terminating the SAToP service and transmitting the
service upstream through the STM-1/E1 port
Terminating the native TDM service and transmitting the
service upstream through the E1/STM-1 port
Voice service VoIP
− SIP
− H.248
− ISDN BRA/PRA access
FOIP
MOIP
POTS voice service
Issuing voice configurations through OMCI
R2 PBX access
H.248/SIP dual upstream transmission
Security User security
System security
OAM security
Line security
OAM features Remote operation and user management
Version and data management
Classification Feature
Device exception management
Service overload control
ETH OAM(Y.1731)
RING check
ANCP
Intelligent site management
Centric Management for GE Remote Extended Subracks
in FTTB or FTTC Scenarios
GE upstream commission outside of the site
* LLDP
System energy Energy conservation control
conservation Energy consumption monitoring
Environment monitoring Monitoring parameters: temperature, humidity, water,
smoke, MDF, and door status sensor
Temperature control unit (TCU) management
Battery online status monitoring and alarm reporting
SMU power management
Control board redundancy Load-balancing mode
Active/Standby mode
Clock features IEEE 1588 V2 clock synchronization
* 1588v2 ACR
BITS access clock synchronization
Synchronous Ethernet clock
System internal clock
Network time synchronization
Line recovered clock (E1/STM-1/SAToP)
Classification Feature
Classification Feature
System logging function
Hierarchical alarms
Maintenance Printing the debugging information
Ping
Trace route
Remote maintenance through SSH telnet
Performance management
Loading and Loading and upgrade through Xmodem
upgrade
Loading and upgrade through FTP, TFTP, or SFTP
Loading and upgrade upon startup, and the in-service loading and
upgrade
Automatically uploading alarms, logs, and data to the FTP server
Performance Performance measurement of the network-side Ethernet packets
measurement
Port performance measurement on the service access side
Traffic performance measurement of the terminal
Multicast traffic measurement
Performance measurement through IGMP proxy or IGMP snooping
Overview
The mainly consists of service interface modules, core processing modules, and upstream
interface modules, as shown in Figure 5-1.
xDSL interface module: comprised by the interface module, Layer 2 forwarding module,
CPU, power module, and clock module to provide xDSL access. Corresponding to the
ADSL, VDSL, and SHDSL boards
Different interface modules have different service boards. For details about working principle
of an interface module, see the description of the corresponding service board in the Hardware
Description.
Service Flow
This section describes the flows of various of access services. The figure 2 shows the typical
application.
Figure 5-2 The flows of various of access services in the typical application
Service Description
The MA5600T/MA5603T/MA5608T can be applicable to the fiber to the home (FTTH)
environment for home users. The MA5600T/MA5603T/MA5608T is connected to the ONT
or HG (Home Gateway) in the user's house through optical fibers to provide users with the
voice, data, and video services.
Example Network
Figure 6-1 shows an example network of the FTTH application, the
MA5600T/MA5603T/MA5608T functioning as the OLT.
Network Description
In the FTTH network application, the MA5600T/MA5603T/MA5608T is connected to the
ONT or HG in the user's house through optical fibers to provide users with the voice, Internet,
and IPTV services.
The MA5600T/MA5603T/MA5608T implements the FTTH application in two modes:
Mode 1: The ONT in the user's house is connected to the
MA5600T/MA5603T/MA5608T through the GPON line.
Mode 2: The home gateway (HG) in the user's house is connected to the
MA5600T/MA5603T/MA5608T through the FE or GE optical port.
The MA5600T/MA5603T/MA5608T is connected to the upstream network through the
Ethernet port (GE or 10GE), cooperating with the BRAS and other application layer devices
to provide users with abundant services.
Service Description
The MA5600T/MA5603T/MA5608T supports the FTTB network application, intended for
the apartment or office building where twisted pair cables or the network cables are routed.
The MA5600T/MA5603T/MA5608T is connected to the ONU that is deployed in the corridor
through optical fibers to provide users with the voice, data, and video services.
An FTTB network is suitable for high-density apartments and small enterprise office
buildings.
Example Network
Figure 6-2 shows an example network of the FTTB application, the
MA5600T/MA5603T/MA5608T functioning as the OLT.
Network Description
In the FTTB network application, the MA5600T/MA5603T/MA5608T is connected to the
ONU that is deployed in the corridor through optical fibers to provide users with multiple
services.
The MA5600T/MA5603T/MA5608T can be connected to the ONU in two modes:
Mode 1: The ONU is deployed in the corridor, connected to the
MA5600T/MA5603T/MA5608T through the GPON line.
Mode 2: The ONU is deployed in the corridor, connected to the
MA5600T/MA5603T/MA5608T through the Ethernet (FE or GE) optical port.
The service implementation is described as follows:
VoIP service
The VoIP terminal (such as a phone set) is connected to the ONU through the POTS port,
and then connected to the softswitch network through the ONU and the
MA5600T/MA5603T/MA5608T.
Data service
− The PC is connected to the LAN switch or hub. The LAN switch or hub is connected
to the MA5600T/MA5603T/MA5608T through the ONU that is deployed in the
corridor, and then connected to the IP network through the BRAS in the upstream
direction.
− The PC is connected to the xDSL modem. The xDSL modem is connected to the
MA5600T/MA5603T/MA5608T through the ONU that is deployed in the corridor,
and then connected to the IP network through the BRAS in the upstream direction.
Video service
The IPTV mode can be used to provide terminal users with video services.
In the IPTV mode, the video service is delivered over IP multicast traffic, supplying
users with various programs.
The MA5600T/MA5603T/MA5608T manages the multicast user rights and programs
based on IGMP proxy and controllable multicast. After the users have passed the
authentication of the MA5600T/MA5603T/MA5608T, the
MA5600T/MA5603T/MA5608T transmits the IGMP protocol packets to the device at
the convergence layer.
The video server transmits the video service traffic to the
MA5600T/MA5603T/MA5608T through the backbone network and the convergence
network. Then, the MA5600T/MA5603T/MA5608T forwards the traffic to the
corresponding subscriber terminal based on the authentication results.
At the user end, the STB terminates video signals, performs media conversion, and
controls program switching.
Service Description
The MA5600T/MA5603T/MA5608T is connected to the ONU or DSLAM that is deployed at
the curb through optical fibers, and then the ONU or DSLAM is connected to each user
through twisted pair cables to provide the voice, data, and video services.
The FTTC network structure is applicable to network applications in the scattered apartments
and industrial parks.
Example Network
Figure 6-3 shows the FTTC network application.
Network Description
In the FTTC network, the MA5600T/MA5603T/MA5608T can be connected to the ONU that
is deployed at the curb through the PON port, or connected to the DSLAM that is deployed at
the curb through the GE optical port, thereby implementing the FTTC network application.
VoIP service
The VoIP terminal is connected to the ONU or DSLAM, which is then connected to the
NGN network through the MA5600T/MA5603T/MA5608T.
Data service
The PC is connected to the DSL modem. The DSL modem is connected to the
MA5600T/MA5603T/MA5608T through the ONU or DSLAM that is deployed at the
curb, which is then connected to the IP network through the BRAS in the upstream
direction.
Video service
The IPTV mode can be used to provide terminal users with video services.
In the IPTV mode, the video service is delivered through IP multicast traffic, supplying
users with various programs.
The MA5600T/MA5603T/MA5608T manages the multicast user rights and programs
based on IGMP proxy and controllable multicast. After the users have passed the
authentication of the MA5600T/MA5603T/MA5608T, the
MA5600T/MA5603T/MA5608T transmits the IGMP protocol packets to the device at
the convergence layer.
The video server transmits the video service traffic to the
MA5600T/MA5603T/MA5608T through the backbone network and the convergence
network. Then, the MA5600T/MA5603T/MA5608T forwards the traffic to the
corresponding subscriber terminal based on the authentication results.
At the user end, the STB terminates video signals, performs media conversion, and
controls program switching.
System Architecture
Figure 6-5 shows the intergrated network diagram of enterprise access sercice. ONU MA5612
and MA5628 function as the single business units (SBU), and implement the enterprise access
services under different scenarios in conjunction with OLT.
Customer benefits:
Use PON passive optical transmission technology to solve the problem of bandwidth
bottleneck of the twisted-pair access technologies restrictions and long-distance
coverage.
Provide E1/T1 interfaces to meet the requirements of TDM access for traditional PBX.
Provide FE/GE interfaces to meet the needs of enterprise data service access, and also
the needs of interconnection between enterprises.
Unified access the DDN service and other data services, voice services. Therefore no
longer need to separately maintain the DDN network, simplifying the network structure.
Network Scenario
Layer 2 interoperation between enterprise branches
As shown in Figure 6-6, ONUs are deployed in branches of an enterprise. The ONUs access
and converge Ethernet services of the enterprise through FE/GE ports and transmit the
services to the OLT. The OLT implements Layer 2 interoperation between different branches
of the enterprise.
Customer benefits: An enterprise that has multiple branches requires intercommunication
between different branches or between its headquarter and branches. Virtual private network
(VPN) can achieve secure interconnection but requires additional devices and complex
management. It requires high costs even if a leased VPN is used. In addition, the bandwidth
provided by a VPN is limited due to restricted VPN access modes and the bandwidth control
is inflexible. To address the preceding problems, the Layer 2 interoperation technology using
fiber access is put forward and becomes the main trend.
ONUs supporting this scenario: MA5612 and MA5628.
Figure 6-6 Network diagram for Layer 2 interoperation between enterprise branches
IP/MPLS
ONU 1 ONU 2
GE FE FE
Note: Because the bandwidth of upstream and downstream PON ports is fixed, the number of
enterprises connected to an OLT is limited when the enterprises require symmetric bandwidth.
When an enterprise requires 100 Mbit/s symmetric bandwidth:
1. The number of enterprises or branches connected to a PON port should not exceed eight.
2. The number of enterprises or branches connected to a PON board should not exceed 64.
3. The number of enterprises connected to an OLT cannot exceed 200 (20G/100M) if the
upstream bandwidth is 2x10GE. (The number of enterprises connected to an OLT is
mainly restricted by the upstream bandwidth.)
DDN private line access service
As shown in Figure 6-7, a protocol converter is deployed between an ONU and DDN node
machine to convert DDN private line services to E1 services. The ONU accesses the E1
services and encapsulates the service packets in TDM over GEM mode and then transmits the
packets to the OLT. The OLT decapsulates the service packets to E1 data and transmits the
data to the SDH network through upstream E1/STM-1 ports, achieving transparent
transmission of DDN services.
Customer benefits: GPON access in OLT+ONU mode can access the DDN private line
service along with other data services and voice service. This access mode does not require
independent maintenance of the DDN network, simplifying network architecture.
ONUs supporting this scenario: MA5612 and MA5628.
Figure 6-7 Networking diagram of the DDN private line access service
IP PBX
ONU
FE/G
E OLT C&C08
IP network
GE/
10GE
Splitter
E
FE/G NGN/IMS
ONU
IP PBX
PRA PBX
ONU
E1
OLT C&C08
IP network
GE/
10GE
Splitter
E1 NGN/IMS
ONU
PRA PBX
E1 SAToP E1/STM-1
Figure 6-11 Networking diagram of the E1/T1 unified access service (OLT cascading)
OLT
Branch Headquarter
SBU
E1/T1/
16 E1/T1 STM-1 T1/STM-1
SDH
TDM Splitter
OLT L2
10 E/
GE
Branch
G
SBU
16 E1/T1
TDM Splitter
E1/T1/
E1/T1 SAToP
STM-1
For more information about leased line service (Enterprise Access), see "FTTx Solution
Overview".
PON has the inherent advantages of IP-based and costs, as well as protection switching
performance that is comparable to traditional solution. This makes the solution of base station
access by PON has gradually become the major choice for operators.
System Architecture
Huawei's solution of base station access by PON based on Huawei's mature OLT products
(MA5600T/MA5603T).
With the serialization of the ONU equipment and PTN optical transmission equipment, or CX
series exchange routing equipment, this solution can quickly and easily achieve the
deployment of base station access services.
Figure 6-12 shows the intergrated network diagram of base station access sercice. ONU
MA5612 and MA5628 function as the backhaul device, and implement the base access
services under different scenarios in conjunction with OLT.
ONU
E1 OLT PTN BSC
E1
SDH
E1/STM-1 GE
FE/GE
STM-1
Splitter RNC
GE
/10
GE IP/MPLS
GE
E1
ONU
Network Scenario
E1 base station access service (in Native TDM mode)
As shown in Figure 6-13, the ONU accesses TDM services of the 2G or 3G base station
through the E1 port, and then transmits the service data to the GPON service board on the
OLT in the Native TDM mode. The OLT restores TDM signals, and then transmits the signals
to the SDH network through the E1 port (provided by the NH1A daughter board) or STM-1
port (provided by the O2CE daughter board) on the TOPA board. In this manner, service
access of the 2G or 3G base station is implemented between the ONU and the OLT in the
Native TDM mode.
Customer benefits:
ONUs are connected to 2G or 3G base stations through E1 ports.
GPON is used for carrying the mobile access network in a unified manner to meet
mobile carriers' requirements for a high bandwidth and high-density coverage of base
stations.
Existing SDH resources are utilized efficiently to implement high-quality transmission of
TDM services.
Mature and standardized interfaces, reliable clock synchronization solution, suitable for
large-scale deployment.
Applicable ONUs: MA5612, MA5628
BTS
BSC
N*E1 ONU OLT
N*E1
BTS
BSC
N*E1 ONU OLT
N*E1
NodeB
RNC
FE/GE ONU OLT
FE/GE
GE/10GE
GE CX600
NodeB PSN RNC
ONU
FE/GE
FE/GE
Clock Synchronization
In wireless technologies, clocks of different base transceiver stations (BTSs) must be the same
and must meet precision requirements. Otherwise, abnormalities such as call interruption and
one-way audio may occur. Generally, this problem can be solved by frequency
synchronization (also called clock synchronization) and phase synchronization (also called
time synchronization) technologies. In a broad sense, clock synchronization includes
Network Protection
Base station access applications support a variety of network protections.
Type B networking mode can be adopted between the OLT and the splitter for
redundancy backup.
Type C networking mode can be adopted between the OLT and the ONU for redundancy
backup.
When the OLT transmits services upstream to the SDH network through the STM-1 ports,
the STM-1 port protect group can be adopted for redundancy backup.
When the OLT transmits services upstream to the SDH network through the GE/10GE
ports, link aggregation mode between GE/10GE ports can be adopted for redundancy
backup.
More information, see "FTTx Solution Overview".
Service Description
As a multi-service access module, the MA5600T/MA5603T/MA5608T supports multiple
xDSL access modes. By making full use of the legacy cooper cable resources, the
MA5600T/MA5603T/MA5608T provides users with various broadband services such as
Internet access service and video service through common twisted pair cables. In addition, the
MA5600T/MA5603T/MA5608T supports transmitting the voice service of the user to the
PSTN network to implement the traditional PSTN service. The main xDSL access modes
supported by the MA5600T/MA5603T/MA5608T are as follows:
ADSL2+ access (compatible with ADSL)
VDSL2 access (compatible with ADSL2+)
SHDSL access (ATM and EFM modes)
The MA5600T/MA5603T/MA5608T also supports the direct access of voice users through
copper cables, providing users with quality VoIP service.
Example Network
Figure 6-17 shows the copper access network application.
Network Description
The MA5600T/MA5603T/MA5608T can separate broadband signals and narrowband
signals on the xDSL line, and then send broadband signals to the IP network and
narrowband voice signals to the PSTN network, thereby providing users with the
broadband service and traditional PSTN service.
The MA5600T/MA5603T/MA5608T supports the direct access of voice users through
copper cables, providing users with the VoIP service by working with the softswitch.
Service Description
In addition to the diversified and flexible broadband service network applications, the
MA5600T/MA5603T/MA5608T can also function as an AG in the softswitch network:
Supports H.248, providing the VoIP service by working with the softswitch.
Supports SIP, providing the VoIP service by working with the softswitch.
In the SIP application, the softswitch can be considered as the SIP server in the SIP model.
The MA5600T/MA5603T supports the ISDN BRA access and PRA access (H.248 and
SIP).
The MA5608T supports the ISDN PRA access (H.248 and SIP).
Supports FoIP and MoIP.
Supports R2 access.
The MA5600T/MA5603T/MA5608T can also function as a voice over IP gateway (VGW)
component in the IMS architecture. In the downstream direction, it provides the access for
voice users or R2 users; in the upstream direction, it is connected to the IMS system,
providing the VoIP service by working with the IMS core.
The MA5600T/MA5603T/MA5608T supports the TDM SHDSL access and provides service
access through the V.35 and E1 ports, thereby implementing reconstruction of the traditional
voice network. Compared with the V.35 cable and E1 cable, the SHDSL cable features longer
transmission distance.
E1 distance extension: Convert the ISDN PRI PBX to work the IP upstream transmission
mode, connected to the softswitch.
V.35 distance extension: Connect the N*64K private line to the digital data network
(DDN) through the SDH network.
MG
Softswitch
Ethernet
Access layer
MA5600T/MA5603T
E1 PRA
R2
Terminal PBX
NT1
S-CSCF
P-CSCF
Convergence
layer IMS core
Ethernet
Access layer
MA5600T/MA5603T
E1 PRA
PBX
Terminal
NT1
Under the control of the CSCF device in the IMS, on the one hand, the
MA5600T/MA5603T/MA5608T implements the communication between IMS voice users.
On the other hand, the MA5600T/MA5603T/MA5608T implements the interconnection with
the PLMN/PSTN users through the MGCF/MG. In this manner, the call processing of the
voice user is implemented.
The upstream signaling stream is connected to the IMS core through the P-CSCF device,
and the traffic stream (also called media stream) is interconnected to the PLMN/PSTN
network through the MG.
In the downstream direction, the user terminals such as voice terminal, fax, and
narrowband modem are supported.
E1
MA5600T/MA5603T
SDH
Modem Modem
V.35 E1
Router PBX
Phone
Signaling stream
Media strem
N*64K private line
service stream
E1 distance extension: On the user side, the TDM SHDSL modem is connected to the PBX
through the E1 (ISDN PRI) port, then the modem is connected to the
MA5600T/MA5603T/MA5608T through TDM SHDSL access, and finally the IP network
transmits the signaling stream and the MG communicates with other voice devices through
the voice traffic stream.
V.35 distance extension: On the user side, the TDM SHDSL modem is connected to the user
device through the V.35 (N*64K private line) port, then the modem is connected to the
MA5600T/MA5603T/MA5608T through TDM SHDSL access, and finally the
MA5600T/MA5603T/MA5608T is connected to the DDN network through the SDH network
to implement the N*64K DDN private line access.
Access Node
Ethernet port
Telnet terminal
Serial
Serial port/
port
Ethernet port Modem
Modem
Remote maintenance
terminal
Local maintenance
terminal
Management Functions
The iManager U2000 provides optimal management functions such as topology management,
performance management, fault management, service configuration, and security
management.
Security Management:
The iManager U2000 provides the NMS security management function. It implements
the authority control based on user, user group, operation set, authority, and access
control list (ACL). It supports the automatic lock, forcible disconnection, and collection
of user logs over the client.
Topology Management:
The topology management function enables the U2000 to display the managed NEs and
the connections between NEs in a topology view. In addition, the U2000 provides the
submaps and various views for the NE management. By browsing the topology view,
you can learn the running status of the entire network in real time. The iManager U2000
can display the NEs on the entire network in a topology view. Therefore, you can
monitor and manage the devices on the entire network through a unified management
platform. This simplifies the operation and management (O&M) of the network and also
reduces the workload for network O&M.
Alarm Management:
The alarm management function enables the iManager U2000 to monitor the abnormal
running conditions of the network in real time. Through the statistics collection, location,
prompt, redefinition, correlation analysis, and remote notification of alarms performed
by the iManager U2000, you can take troubleshooting measures to restore the network in
time.
Performance Management:
The iManager U2000 can monitor the key indicators of a network and provide statistics
for the collected performance data. It provides a graphic user interface (GUI) for
facilitating the network performance management.
Existing Resources Management:
The iManager U2000 provides the existing resources management function for
customers to query and collect statistics for the physical and logical resources in a
unified manner.
Service Configuration:
Intended for various functions and services of the MA5600T/MA5603T/MA5608T, the
U2000 provides the function of configuring multiple services.
Log Management:
Log management includes the management of U2000 security logs, U2000 operation
logs, and NE security logs. By querying and saving the logs periodically, you can detect
unauthorized login or operations, and analyze faults in time. Through the logs, you can
obtain the information about the client from which the U2000 user logs in to the U2000
server and the operations performed by the user after the login. You can also dump or
print log data.
Database Management:
The iManager U2000 provides a tool for database backup and recovery. This simplifies
the maintenance of the U2000 database and helps the U2000 run stably and securely.
Database management includes the management of NE database and the management of
U2000 database. To ensure the data security, you need to back up the database
periodically.
NE Communication Parameter Management:
The iManager U2000 supports the configuration of the parameters for the
communication between the U2000 and the NE. This ensures that the U2000 and the NE
communicate with each other normally.
NE Software Management:
The iManager U2000 provides the function of managing the NE software and database,
such as upgrading the software, installing the patch, configuring the data periodically,
and manually restoring the data.
Report Management:
The U2000 supports the iWeb report function that enables the system to provide
customers with reports about alarms, logs, and resources. You can print the report or save
the report as a file when viewing the report data. Reports that are displayed as tables can
be filtered by device type, and can be saved as files in Excel format.
System Monitoring:
The iManager U2000 provides the system monitoring tool. By using the tool, you can
monitor and maintain the system through the GUI.
LLDP
MA5600T/MA5603T/MA5608T supports Link Layer Discovery Protocol (LLDP). As a
Layer 2 discovery protocol defined in IEEE 802.1ab, LLDP provides a standard link layer
discovery method. Using this method, information such as the capabilities, management
address, device ID, and port ID of a local device can be encapsulated in LLDP frames and
transmitted to adjacent nodes. After receiving such information, the adjacent nodes save the
information in a standard management information base (MIB), which can be queried by the
NMS for determining the connectivity of links.
LLDP can precisely discover the ports of network devices and the interconnection between
devices. By obtaining and integrating the LLDP local device information and neighbor device
information on each network element (NE), the NMS can generate a clear topology of the
entire network, along with detailed information such as the physical connections between
devices. Such information helps network operators monitor network status in real time and
quickly locate network faults, effectively improving network security and stability.
8 Technical Specifications
System Performance
Parameter Specification
Backplane bus MA5600T: 3.2 Tbit/s
switching capacity MA5603T: 1.5 Tbit/s
MA5608T: 720 Gbit/s
Parameter Specification
System L2 packet SCUB: 72 Mpps
forwarding rate SCUN: 726 Mpps(Active/Standby mode), 1452 Mpps(Load-sharing
mode)
SCUF: 190 Mpps
SCUH: 1428 Mpps(Active/Standby mode), 2856
Mpps(Load-sharing mode)
MCUD/MCUD1: 190Mpps(Active/Standby mode),
380Mpps(Load-sharing mode)
Control board SCUB: 48 Gbit/s
switching capacity SCUN: 480 Gbit/s(Active/Standby mode), 960Gbit/s(Load-sharing
mode)
SCUF: 128 Gbit/s
SCUH: 960 Gbit/s(Active/Standby mode), 1920Gbit/s(Load-sharing
mode)
MCUD/MCUD1: 128Gbit/s(Active/Standby
mode),256Gbit/s(Load-sharing mode)
Switching/Forwardi Short forwarding delay: The 100 Mbit/s Ethernet port sends the
ng delay 64-byte Ethernet packets at a delay shorter than 20 μs.
BER in full load BER of port when transmitting data in full load < 10 e-7
Parameter Value
The networking environments are different and the device uses different boards. Therefore, the reference
value of the MTBF of the MA5600T/MA5603T/MA5608T is 45 years and the reference value of the
MTTR of the Field Replaceable Unit (FRU) is two hours. The preceding values are only for reference.
For details, contact the related Huawei engineers.
Device Configuration
The maximum number of GE upstream ports in a subrack or the maximum number of 10GE
upstream ports in a subrack refers to the maximum number of upstream ports supported by the
upstream board configured in the GIU slot.
If the services slots house the SPUA boards, a single slot can support eight GE upstream
ports and two 10GE upstream ports.
If the services slots house the SPUC boards, a single slot can support 40 GE upstream
ports and four 10GE upstream ports.
If the services slots house the SPUF boards, a single slot can support three interface
working modes: 8 * 10GE, 8 * GE, 4 * 10GE + 4 * GE.
If the service slots house the ETHB boards, a single slot can support eight GE upstream
ports.
MA5600T/MA5603 MA5608T
T
Outband SCUB/SCUN/SCUF MCUD/MCUD1 1
management /SCUH control
Ethernet port board
(RJ-45)
Local serial port SCUB/SCUN/SCUF MCUD/MCUD1 1
(Console) /SCUH control
board
GICG - 2
GE optical port GICF/GICK MCUD1 2
SCUB/SCUN/SCUH MCUD 4
/GICD/GSCA
ETHB/SPUA/SPUF ETHB/SPUF 8
SPUC - 40
10GE optical port X2CS/SPUA MCUD1 2
SPUC - 4
SPUF SPUF 8
E1 port TOPA TOPA 16
STM-1 upstream TOPA TOPA 2
optical port
PON upstream P2CA - 2 (One PON port is
optical port available and the
other is backup.)
Parameter Specification
Power supply mode DC
Rated voltage -48 V / -60 V
Working voltage range -38.4 V to -72 V
Maximum input current 80 A
Parameter Specification
Power supply mode DC
Rated voltage -48 V / -60 V
Working voltage range -38.4 V to -72 V
Maximum input current 80 A
Table 8-12 shows the power parameters of the N66E-18 dual-standard cabinet.
Parameter Specification
Item Specification
Dimensions (W x D x H, including 530.00 mm x 275.80 mm x 447.20 mm
mounting brackets)
Dimensions (W x D x H, excluding 490.00 mm x 275.80 mm x 447.20 mm
mounting brackets)
Maximum weight (including 33.00 kg
mounting brackets)
The maximum power consumption of the subrack is tested in the following conditions:
-53.5 V DC
Ambient temperature of 25 °C
Static power consumption: power consumption of the powered-on equipment with no load (all user
ports are deactivated)
Maximum power consumption: power consumption of the powered-on equipment with full services
Typical power consumption: power consumption of a device when 50% of its users are online
(1)
In the typical application of voice services, the convergence ration is 25%. The maximum power
consumption of an H808ASPB board is calculated based on the 25% convergence ratio. Therefore,
the typical power consumption (instead of maximum power consumption) is obtained for an
H808ASPB in voice service configurations. The maximum power consumption of the other service
board is calculated based on the 100% convergence ratio.
(2)
The PON port that are not connected to any users should be disabled when you calculate the
typical power consumption.
You can calculate the power consumption based on the formula with the boards supported by the
product version when the upper boards is not supported.
Table 8-15 and list the specifications of the IEC service subrack.
Item Specification
Dimensions (W x D x H, including 482.60 mm×275.80 mm×441.70 mm
mounting brackets)
Dimensions (W x D x H, excluding 442.00 mm×275.80 mm×441.70 mm
mounting brackets)
Maximum weight (including 30.54 kg
mounting brackets)
The maximum power consumption of the subrack is tested in the following conditions:
-53.5 V DC
Ambient temperature of 25 °C
Unit: W
Static power consumption: power consumption of the powered-on equipment with no load (all user
ports are deactivated)
Maximum power consumption: power consumption of the powered-on equipment with full services
Typical power consumption: power consumption of a device when 50% of its users are online
(1)
In the typical application of voice services, the convergence ration is 25%. The maximum power
consumption of an H808ASPB board is calculated based on the 25% convergence ratio. Therefore,
the typical power consumption (instead of maximum power consumption) is obtained for an
H808ASPB in voice service configurations. The maximum power consumption of the other service
board is calculated based on the 100% convergence ratio.
You can calculate the power consumption based on the formula with the boards supported by the
product version when the upper boards is not supported.
Item Specification
Dimensions (W x D x H, excluding 442mm×220mm×43.6mm
mounting brackets)
Dimensions (W x D x H, including mounting 482.6mm×220mm×43.6mm
brackets)
Weight (empty chassis) 3.2 kg
Power (17a) Static: 23
Maximum: 73
Maximum power (8b) Static: 23
Maximum: 79
The maximum power consumption of the subrack is tested in the following conditions:
-53.5 V DC
Ambient temperature of 25°C
Static power consumption: power consumption of the powered-on equipment with no load (all user
ports are deactivated)
Maximum power consumption: power consumption of the powered-on equipment with full services
Item Specification
Dimensions (W x D x H, excluding 442.00 mm x 283.20 mm x 263.90 mm
mounting brackets)
Dimensions (W x D x H, including mounting 482.60 mm x 283.20 mm x 263.90 mm
brackets of 19-inch standard)
Dimensions (W x D x H, including mounting 535.00 mm x 283.20 mm x 263.90 mm
brackets of ETSI standard)
Weight (empty chassis) 7.00 kg
Parameter Specification
The maximum power consumption of the subrack is tested in the following conditions:
-53.5 V DC
Ambient temperature of 25°C
Static power consumption: power consumption of the powered-on equipment with no load (all user
ports are deactivated)
Maximum power consumption: power consumption of the powered-on equipment with full services
Typical power consumption: power consumption of a device when 50% of its users are online
(1)
In the typical application of voice services, the convergence ration is 25%. The maximum power
consumption of an H808ASPB board is calculated based on the 25% convergence ratio. Therefore,
the typical power consumption (instead of maximum power consumption) is obtained for an
H808ASPB in voice service configurations. The maximum power consumption of the other service
board is calculated based on the 100% convergence ratio.
(2)
The PON port that are not connected to any users should be disabled when you calculate the
typical power consumption.
You can calculate the power consumption based on the formula with the boards supported by the
product version when the upper boards is not supported.
Item Specification
Dimensions (W x D x H, excluding 442mm×244.5mm×88.1mm
mounting brackets)
Dimensions (W x D x H, including mounting 482.6mm×244.5mm×88.1mm
Item Specification
brackets of IEC standard)
Dimensions (W x D x H, including mounting 535mm×244.5mm×88.1mm
brackets of ETSI standard)
NOTE
ETSI standard dimension is to add the ETSI
mounting bracket on the IEC mounting bracket.
Parameter Specification
Power supply mode DC or AC
Rated voltage DC power supply: -48 V / -60 V
AC power supply: 110 V / 220 V
Working voltage range DC power supply: -38.4 V to -72 V
AC power supply: 100 V to 240 V
Maximum input current DC power supply: 10 A
AC power supply: 6 A
The maximum power consumption of the subrack is tested in the following conditions:
-53.5 V DC
Ambient temperature of 25°C
Static power consumption: power consumption of the powered-on equipment with no load (all user
ports are deactivated)
Maximum power consumption: power consumption of the powered-on equipment with full services
Typical power consumption: power consumption of a device when 50% of its users are online
(1)
In the typical application of voice services, the convergence ration is 25%. The maximum power
consumption of an H808ASPB board is calculated based on the 25% convergence ratio. Therefore,
the typical power consumption (instead of maximum power consumption) is obtained for an
H808ASPB in voice service configurations. The maximum power consumption of the other service
board is calculated based on the 100% convergence ratio.
(2)
The PON port that are not connected to any users should be disabled when you calculate the
typical power consumption.
You can calculate the power consumption based on the formula with the boards supported by the
product version when the upper boards is not supported.
The board power consumption is measured at -53.5 V and 25°C. The board power consumption slightly
varies with the power module configured for the board and discreteness of components.
The MTU of the SCU boards, the GIU boards, and the ETH boards is 9220 bytes after enabled Jumbo
Frame. The size of MTU of the GICK board is the same whether enabled the Jumbo Frame.
Table 8-24 lists the power consumption and MTU of the control boards.
Table 8-25 lists the power consumption and MTU of the service boards.
Table 8-26 lists the power consumption of the power interface board.
Table 8-27 lists the power consumption of the clockl interface boards.
Table 8-28 lists the power consumption and MTU of the upstream interface boards.
Table 8-29 lists the power consumption of the fan boards.
Dimensions
Table 8-30 and Table 8-31 list the dimensions of the boards supported by the
MA5600T/MA5603T/MA5608T.
Figure 8-1 illustrates the dimensions of a board (considering the service board as an example).
The air density varies with the altitude, which affects the heat dissipation of a cabinet. Therefore, the
working environment temperature of the cabinet varies with the altitude.
Environment Specification
Parameter
Environment Specification
Parameter
Working -40°C to +65°C
environment
temperature
Working 5% RH to 95% RH
environment
humidity
Atmosphere 61 kPa to 106 kPa
pressure
Altitude < 4000 m
Environment Specification
Parameter
Working -40°C to +65°C
environment
temperature
Working 5% RH to 95% RH
environment
humidity
Atmosphere 61 kPa to 106 kPa
pressure
Altitude < 4000 m
The commonly used ports are listed here. For information about more ports, see the Hardware
Description.
GE optical/ 10 GE optical
E1 port STM-1 port
electrical port port
Upstream direction
Maintenance
Maintenance Ethernet port
serial port Access Node Environment
monitoring
serial port
Downstream
direction
No. 1 2
No. 1
Reach 20 km
No. 1 2 3 4 5 6 7
Port Rate 2.13 Gbit/s 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbit/s
1.25 Gbit/s
1.06 Gbit/s
Minimum -9.50 dBm -9.50 dBm -9.50 dBm -9.00 dBm -5.00 dBm -5.00 dBm -2.00 dBm
Output
Optical
Power
Maximum -2.50 dBm 0 dBm -3.00 dBm -3.00 dBm 0 dBm 0 dBm 5.00 dBm
Output
Optical
Power
Optical LC LC LC LC LC LC LC
Connector
Type
Overload -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm
Optical
Power
No. 1 2 3 4 5
Operating Tx: 1310 Tx: 1490 Tx: 1310 Tx: 1490 Tx:
Wavelength nm nm nm nm 1570nm
Rx: 1490 Rx: 1310 Rx: 1490 Rx: 1310 Rx:
nm nm nm nm 1490nm
Port Rate 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbit/s 1.25 Gbps
Minimum -9.00 dBm -9.00 dBm -2.00 dBm -2.00 dBm -2 dBm
Output Optical
Power
Maximum -3.00 dBm -3.00 dBm 3.00 dBm 3.00 dBm 4 dBm
Output Optical
Power
Maximum -19.50 dBm -19.50 dBm -23.00 dBm -23.00 dBm -26 dBm
Receiver
Sensitivity
Optical LC LC LC LC LC
Connector Type
Overload -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3 dBm
Optical Power
Reach 10.00 km
Operating Wavelength 1471 nm, 1491 nm, 1511 nm, 1531 nm, 1551 nm,
1571 nm, 1591 nm, 1611 nm
Reach 80.0 km
GE Electrical Module
Reach 100.00 m
No. 1 2 3
No. 1 2 3 4
Optical LC LC LC LC
Connector Type
FE Optical Module
Reach 15.00 km
8.3.6 E1 Port
This topic describes the standards compliance of the E1 port.
No. 1 2 3 4
Optical LC LC LC LC
Connector Type
Parameter Specification
Maximum transmission distance 6500 m
Cable type Twisted pair
Frequency Downstream: 138 kHz to 2.208 MHz
Upstream: 26 kHz to 138 kHz
Modulation Discrete multitone (DMT)
Service supported ADSL2+ over POTS
Frame protocol supported ATM
Standards compliance ITU-T G.992.1
ITU-T G.992.2
ITU-T G.992.3
ITU-T G.992.5
ANSI T1.413
Parameter Specification
Cable type Twisted pair
Modulation DMT
Service supported VDSL2 over POTS
Frame protocol supported PTM
Standard compliance ITU-T G.993.2
Standard ID Description
ITU-T G.997.1 Physical Layer Management for Digital Subscriber Line (DSL)
Transceivers
ANSI T1.413 Network and customer installation interface - Asymmetric Digital
Subscriber Line (ADSL) Metallic Interface
ETSI TS 101 388 Access transmission systems on metallic access cables;
Asymmetric Digital Subscriber Line (ADSL) - European specific
requirements
ITU G.991.2 Single-Pair High-Speed Digital Subscriber Line (SHDSL)
Transceivers
G.991.2 ANNEX A -
G.991.2 ANNEX B -
DSL Forum
Standard ID Description
H.248 Protocol
Standard ID Description
SIP Protocol
Standard ID Description
Standard ID Description
Initiation Protocol (SIP)
RFC 3263 Locating SIP servers
RFC 3265 Specific Event Notification
RFC 3331 The Session Initiation Protocol (SIP) UPDATE method
RFC 3312 Integration of Resource Management and Session
Initiation Protocol (SIP)
RFC 3320 Signaling Compression
RFC 3321 Signaling Compression (SigComp) - Extended Operations
RFC 3323 A Privacy Mechanism for the Session Initiation Protocol
(SIP)
RFC 3325 Private Extensions to the Session Initiation Protocol (SIP)
for Asserted Identity within Trusted Networks
RFC 3326 The Reason Header Field for the Session Initiation
Protocol (SIP)
RFC 3420 Internet Media Type message/sipfrag
RFC 3428 Session Initiation Protocol (SIP) Extension for Instant
Messaging
RFC 3455 Private Header (P-Header) Extensions to the Session
Initiation Protocol (SIP) for the 3rd-Generation Partnership
Project (3GPP)
RFC 3485 The Session Initiation Protocol (SIP) and Session
Description Protocol (SDP) Static Dictionary for Signaling
Compression (SigComp)
RFC 3486 Compressing the Session Initiation Protocol (SIP)
RFC 3515 The Session Initiation Protocol (SIP) Refer Method
RFC 3581 An Extension to the Session Initiation Protocol (SIP) for
Symmetric Response Routing
RFC 3608 Session Initiation Protocol (SIP) Extension Header Field
for Service Route Discovery During Registration
RFC 3960 Session Initiation Protocol (SIP) Basic Call Flow
Examples
RFC 3680 A Session Initiation Protocol (SIP) Event Package for
Registrations
RFC 3841 Caller Preferences for the Session Initiation Protocol (SIP)
RFC 3842 A Message Summary and Message Waiting Indication
Event Package for the Session Initiation Protocol (SIP)
RFC 3891 The Session Initiation Protocol (SIP) "Replaces" Header
Standard ID Description
RFC 3903 Session Initiation Protocol (SIP) Extension for Event State
Publication
RFC 3960 Early Media and Ringing Tone Generation in the Session
Initiation Protocol (SIP)
RFC 4028 Session Timers in the Session Initiation Protocol (SIP)
RFC 4083 Input 3GPP Release 5 Requirements on the SIP
RFC 4168 The Stream Control Transmission Protocol (SCTP) as a
Transport for the Session Initiation Protocol (SIP)
RFC 4320 Actions Addressing Identified Issues with the Session
Initiation Protocol's (SIP) Non-INVITE Transaction
RFC 4321 Problems Identified Associated with the Session Initiation
Protocol's (SIP) Non-INVITE Transaction
Standard ID Description
Standard ID Description
ETS 300 019-1-1 Environmental conditions and environmental tests for
telecommunications equipment; Part 1-1: Classification of
environmental conditions; Storage
ETS 300 019-1-2 Environmental Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment; Part 1-2:
Classification of environmental conditions; Transportation
ETS 300 019-1-3 Environmental Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment; Part 1-3:
Classification of environmental conditions; Stationary use at
weather-protected locations
ETS 300 019-2-1 Environmental conditions and environmental tests for
telecommunications equipment. Part 2-1: Specification of
environmental tests. Storage
ETS 300 019-2-2 Equipment Engineering; Environmental conditions and
environmental tests for telecommunications equipment. Part 2-2:
Specification of environmental tests. Transportation
IEC 60721-3-3 Classification of environmental conditions Part 3: Classification
of groups of environmental parameters and their severities -
Section 3: Stationary use at weather-protected locations
GR-63-CORE Network Equipment-Building System Requirements: Physical
Protection
Standard ID Description
IEC 61000-4-2 Electromagnetic compatibility - Part4-2: Testing and
measurement techniques-Electrostatic discharge immunity test
IEC 61000-4-3 Electromagnetic compatibility (EMC) - Part 4-3: Testing and
measurement techniques - Radiated, radio-frequency,
electromagnetic field immunity test
IEC 61000-4-4 Electromagnetic compatibility (EMC) - Part 4-4: Testing and
measurement techniques-Electrical fast transient/burst immunity
test
IEC 61000-4-5 Electromagnetic compatibility (EMC) - Part 4-5: Testing and
measurement techniques-Surge immunity test
IEC 61000-4-6 Electromagnetic compatibility (EMC) - Part 4-6: Testing and
measurement techniques-Immunity to conducted disturbances,
induced by radio-frequency fields
EN 61000-4-29 Electromagnetic compatibility (EMC) - Part4-29: Testing and
Standard ID Description
measurement techniques-Voltage dips, shot interruptions and
voltage variations on d.c. input power port immunity tests
EN 61000-4-2 Electromagnetic compatibility (EMC) Section 4.2 Electrostatic
discharge immunity test - Basic EMC Publication
EN 61000-4-3 Electromagnetic compatibility - Part4-3: Testing and
measurement techniques-Radiated, radio-frequency,
electromagnetic field immunity test
EN 61000-4-4 Electromagnetic compatibility - Part 4: Testing and measurement
techniques Section 4: Electrical fast transient/burst immunity
test-Basic EMC publication
EN 61000-4-5 Electromagnetic compatibility (EMC) - Part4-5: Testing and
measurement techniques-Surge immunity test
EN 61000-4-6 Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques Section 6: immunity to conducted
disturbance, induced by radio-frequency fields
IEC 61000-4-29 Electromagnetic compatibility (EMC) - Part 4-29: Testing and
measurement techniques-Voltage dips, shot interruptions and
voltage variations on d.c. input power port immunity tests
ETSI EN 300 386 Electromagnetic compatibility and Radio spectrum Matters
V1.5.1 (ERM); Telecommunication network equipment; Electromagnetic
Compatibility (EMC) requirements
ETSI ES 201 486 Electromagnetic compatibility and Radio spectrum Matters
V1.3.1 (ERM);Additional ElectroMagnetic Compatibility (EMC)
requirements and resistibility requirements for
telecommunications equipment for enhanced availability of
service in specific applications
VCCI V-3 Spectrum Management and Telecommunications
Interference-Causing Equipment Standard Information
Technology Equipment (ITE) – Limits and methods of
measurement
EN 55022 Information technology equipment-Radio disturbance
characteristics - Limits and methods of measurement
EN 55024 Information technology equipment - Immunity characteristics -
Limits and methods of measurement
ITU-T K.20 Resistibility of telecommunication equipment installed in a
telecommunications center to overvoltages and overcurrents
CISPR 22 Information technology equipment - Radio disturbance
characteristics - Limits and methods of measurement
CISPR24 Information technology equipment - Immunity characteristics -
Limits and methods of measurement
ITU-T K.32 Immunity requirements and test methods for electrostatic
discharge to telecommunication equipment - Generic EMC
Standard ID Description
Recommendation
ITU-T K.44 SERIES K: PROTECTION AGAINST INTERFERENCE
Resistibility test for telecommunication equipment exposed to
overvoltages and overcurrents - Basic Recommendation
FCC part 15 class A The Federal Code Of Regulation (CFR) FCC Part 15 is a
common testing standard for most electronic equipment.. Class A
Digital Device. "A digital device that is marketed for use in a
commercial, industrial or business environment, exclusive of a
device which is marketed for use by the general public or is
intended to be used in the home."
ICES-003 VCCI COUNCIL RULES Normative Annex 1:Technical
Requirements
Standard ID Description
EN 60950-1 Information Technology Equipment - safety - Part 1: General
Requirements
EN 60825-1 Safety of laser products - Part 1 - Equipment classification,
requirement and user's guide
EN 60825-2 Safety of laser products - Part 2 - Safety of optical fiber
communication
IEC 60825-1 Safety of laser products - Part 1 - Equipment classification,
requirement and user's guide
IEC 60825-2 Safety of laser products - Part 2 - Safety of optical fibre
communication
IEC 60950-1 Information Technology Equipment - safety - Part 1: General
Requirements
UL 60950-1 2nd Edition, 2007-03-27 (Information Technology Equipment -
Safety - Part 1: General Requirements)
Reliability Standards
Standard ID Description
MIL-HDBK-217F Reliability Prediction of Electronic Equipment
BELLCORE Reliability Prediction Procedure for Electronic Equipment
TR-332/SR-332
Packaging Standards
Standard ID Description
ISTA Procedure ISTA: International Safe Transit Association LEVEL 2A/2B
2A/2B
Encapsulation Protocols
Standard ID Description
RFC1483 Multiprotocol Encapsulation over ATM Adaptation Layer 5
RFC2684 Multiprotocol Encapsulation over ATM Adaptation Layer 5
RFC1626 Default IP MTU for use over AAL5
RFC1661 Point to Point Protocol (PPP)
RFC2516 PPPoE
RFC2364 PPPoA
RFC2225 Classical IP and ARP over ATM
RFC3046 DHCP Relay
RFC2236 IGMPv2
RFC3376 IGMPv3
TR101 PPPOE+, DHCP Option82
TR156 Using GPON Access in the context of TR-101
RFC2132 DHCP Option60
IP Protocols
Standard ID Description
Standard ID Description
RFC791 IP protocol
RFC792 ICMP protocol
RFC793 TCP protocol
RFC826 ARP protocol
RFC854 Telnet protocol
RFC894 Standard for transmitting IP packet on Ethernet
RFC2131 DHCP protocol
RFC1119 NTP protocol
RFC1858 Security Considerations for IP Fragment Filtering
RFC2453 RIP protocol
RFC2362 PIM-SM
RFC2328 OSPF
RFC2474 Definition of the Differentiated Services Field (DS Field) in the
IPv4 and IPv6 Headers
RFC2475 An architecture for differentiated services, including
edge-conditioning functions such as packet classification,
policing, shaping, marking, and metering
OAM Protocols
Standard ID Description
Standard ID Description
Management Protocol (SNMP)
RFC2573 SNMP Applications
RFC1643 Definitions of Managed Objects for the Ethernet-like Interface
Types
RFC2662 Definitions of Managed Objects for DSL Lines
GR-474-CORE Network Maintenance, Alarm and Control
RFC2578 Structure of Management Information Version 2 (SMIv2)
RFC2819 Remote Network Monitoring
IEEE 802.1ag Connectivity Fault Management
IEEE 802.3ah Media Access Control Parameters, Physical Layers, and
Management Parameters for Subscriber Access Networks