Professional Documents
Culture Documents
Agent
Product Code
300.205.001
FM200
FM200 Container Assembly Container Dia (mm) Ht to Valve Outlet Tare Weight Max FM200
Size (l) (A) (mm) (B) (Kg) Weight (Kg)
6.5 (BS) 222 300 9 6.5
6.5 (EC) 222 335 9 6.5
8 254 304 15 8
13 (BS) 222 495 12 13
13 (EC) 222 520 12 13
16 254 502 19 16
25.5 (BS/EC) 222 830 17 25.5
32 254 833 26 32
40 267 975 65 40
52 (BS) 406 580 49 52
52 (EC) 406 605 49 52
52 (DOT) 406 595 49 52
80 267 1785 108 80
106 (BS) 406 1021 72 106
106 (EC) 406 1040 72 106
106 (DOT) 406 1020 72 106
147 (BS) 406 1354 90 147
147 (EC) 406 1370 90 147
147 (DOT) 406 1360 90 147
180 (BS) 406 1634 106 180
180 (DOT) 406 1640 106 180
Page 14
ext2.qxd 13/02/01 17:02 Page 15
Pneumatic Actuator
The pneumatic actuator is used where container A minimum pressure of 4 bar is required to
operation is required by means of gas pressure ensure satisfactory operation.
from the system master container, remote manual Connection to the actuator is 1/4” B.S.P.
release unit or from a pilot container. When fitting
it is only necessary for the unit to be hand tight. Product Code
The unit is designed so that it may be fitted 304.205.004
directly onto the top of the container valve or be Pneumatic actuator
used in conjunction with a solenoid actuator, in
which case it fits directly on top of the solenoid
actuator.
Union Adaptor
The union adaptor is used to enable pipework to containers from the pipework straightforward.
be easily connected to and disconnected from It is recommended that the joint to the container
the FM200 container valve outlet adaptor. It is valve adaptor is made using PTFE tape.
available in two sizes, 25mm and 50mm.
One end is provided with a parallel female thread Product Codes
to provide a compatible joint to the container 309.002.011
outlet adaptor. The other end is provided with a 25mm (1”) Union adaptor
female NPT thread to enable pipework to be 309.002.012
connected. A swivel joint makes disconnecting 50mm (2”) Union adaptor
Page 15
ext2.qxd 13/02/01 17:02 Page 16
Product Code
305.205.001
Supervisory pressure switch
Page 16
ext2.qxd 13/02/01 17:04 Page 17
PRESENT ONLY
ON BRACKET
ASSEMBLY
311.205.003 HOLE DIA 11.5 (TYP)
SEE DETAIL A
DETAIL A
6.5/13/25.5 LITRE CONTAINER BRACKET
Page 17
ext2.qxd 13/02/01 17:04 Page 18
Product Code
311.205.013
Container brackets 8/16/32 litre containers
210
Manifolds
Manifolds are designed to enable all the Type Product Code
Manifold
containers in a row to be connected to the 65mm x 2 port 307.205.012
supply pipe and may be used in multi container 65mm x 3 port 307.205.013
applications or in main and reserve systems. 65mm x 4 port 307.205.014
All manifolds are pressure tested at the works to 80mm x 2 port 307.205.001
90 bar. 80mm x 3 port 307.205.002
All Product Code Numbers include the manifold 80mm x 4 port 307.205.003
and Check Valves. 80mm x 5 port 307.205.011
65/80/100mm NPT (both ends) 100mm x 2 port 307.205.004
100mm x 3 port 307.205.005
50mm Check Valve 100mm x 4 port 307.205.006
100mm x 5 port 307.205.007
100mm x 6 port 307.205.008
150mm x 3 port 307.205.009
150mm x 4 port 307.205.010
150mm x 5 port 307.205.015
150mm x 6 port 307.205.016
150mm x 7 port 307.205.017
150mm x 8 port 307.205.018
150mm x 9 port 307.205.019
150mm x 10 port 307.205.020
Page 18
ext2.qxd 13/02/01 17:05 Page 19
Product Codes
311.205.015
65mm Manifold support bracket
311.205.010
80mm Manifold support bracket
Discharge Hoses
The flexible Discharge Hose connects the Product Codes
container to the check valve on the manifold. 306.205.001
A swivel fitting at the end of the hose allows ease 32mm flexible discharge hose
of installation. 306.205.002
NOTE: The purpose of the 32mm hose is to 50mm flexible discharge hose
prevent excessive pressure loss experienced
when using a 25mm hose from the 25mm FM200
container valve. Connection to the 25mm
container valve is by means of a 32mm x 25mm
adaptor included as part of the 32mm hose
assembly.
Product Code
314.205.003
Manual release plate
Page 19
ext2.qxd 13/02/01 17:05 Page 20
Reference Description
1 FM200 Container Assembly
2 Container Bracket
3 Container Nameplate
4 Pressure Gauge
5 Solenoid Actuator
6 Local Manual Actuator
6a Safety Pin
7 Supervisory Pressure Switch*
8 Pneumatic Actuator
9 Pressure Switch
10 Discharge Nozzle
11 Manual Release Caution Plate
12 Container Design Details
13 Discharge Pipework
14 Pneumatic Actuation Tubing
15 Junction Box
Page 20
ext2.qxd 13/02/01 17:06 Page 21
Product Codes
303.205.015
8 Litre container assembly
303.205.016
16 Litre container assembly
303.205.017
32 Litre container assembly
303.205.018
52 Litre container assembly
303.205.019
106 Litre container assembly Label fitted to containers on UL listed systems
Page 21
ext2.qxd 13/02/01 17:07 Page 22
Product Codes
311.205.013
8-32 litre Container bracket assembly
311.205.014
52-180 litre Container bracket assembly
Page 22
ext2.qxd 13/02/01 17:07 Page 23
Product Codes
311.205.015
65mm Manifold support bracket
311.205.010
80mm Manifold support bracket
Discharge Hoses
The flexible Discharge Hose connects the Product Codes
container to the check valve on the manifold. 306.205.001
A swivel fitting at the end of the hose allows ease 32mm Flexible discharge hose
of installation. 306.205.002
NOTE: The purpose of the 32mm hose is to 50mm Flexible discharge hose
prevent excessive pressure loss experienced
when using a 25mm hose from the 25mm FM200
container valve. Connection to the 25mm
container valve is by means of a 32mm x 25mm
adaptor included as part of the 32mm hose
assembly.
Page 23
ext2.qxd 13/02/01 17:07 Page 24
Product Code
314.205.003
Manual release plate
Page 24
ext2.qxd 13/02/01 17:07 Page 25
Page 25
ext2.qxd 13/02/01 17:08 Page 26
Technical Specification
Net Weight: 0.02Kg
Thread Size: 3/16” Enots (male)
Discharge Hose
The 1/2" flexible discharge hose connects the Product Code
container valve outlet to the check valve on the 306.200.005
manifold and is sufficiently flexible to 15mm Discharge hose
accommodate the small variations found in
container heights. Swivel female couplings allow
ease of installation in any orientation.
Technical Specification
Net weight 0.85 kgs.
Page 26
ext2.qxd 13/02/01 17:08 Page 27
Odouriser 2000
The Odouriser 2000 is designed to give a each 2000Kg of CO2. The odouriser must be
distinctive small to the CO2 and is particularly replaced after each operation of the system.
useful in basements or low lying areas in the Connection to the pipework is 1/2” A.P.I. (male).
vicinity of the system or any place where CO2 Technical Specification
could drift to following a discharge. Net Weight: 0.275Kg
Liquid citrus odour is contained in the body of the
odouriser and is sealed in by a lead disc. Product Code
Pressure of the discharging CO2 causes the disc 305.200.003
to rupture and allows the liquid to escape and mix Odouriser
with the CO2. One type odouriser is used for
Page 27
ext2.qxd 13/02/01 17:09 Page 28
Page 28