gi,
SUNCOR
ENERGY
Technical Standard No. FB-M-5305
FIREBAG PROGRAM
FIREPROOFING OF STRUCTURES AND EQUIPMENTS
SUNCOR ENERGY INC.
CANADA
oo 7
1_[_ &-Sep-05_| Issued for implementation P. Parmar | P.Parmar |”. Tullis |’ K. Hart
Rev | __Date Document Status Originator | Engineer | Reviewer | Approver:
UNCONTROLLED DOCUMENT WHEN PRINTED (26-Jan-06) CONTROLLED DOCUMENT IN JPI EWR 100-2004-001 — 4-4-7
File Name: STD_FE-M-5305_- Rev__1_- Fireprofing_of_Structures_and, Equipment.D0C. Page 1 of 12a
SUNCOR
IRERAG PROGR ~ GN STRUGTURAL ENOMEERNG
ENERGY TECHNICAL STANDARD
Sabie ‘Namba Revision:
FIREPROOFING OF STRUCTURES AND EQUIPMENTS FB-M-5305 4
— REVISION HISTORY — J
ev_[ Date —___Desaipion
1 | 6:Sep-05 | "issued for implementation -
B_| B-aug-05 [Issued for External Squad Check -
A} 1asJuEO5 | tested for Intemal Squad Check
‘This slandard is based on Suncor Energy Inc. Standard No, 1003 Rev. 2and has
been developed special for use on Prebag Projects
TABLE OF CONTENTS
1.0 GENERAL
11 Scope
1.2 Definitions
1.3. Codes and Standards
1.4 Submittals
20 MATERIALS
24 General
22 Concrete
23 Proprietary Cementitious Materials
3.0 EXECUTION
3.1. Surface Preparation and Protection
3.2. Preparation of Wire Mesh and Anchors
3.3 Formed Concrete and Pneumatically Applied Concrete (Shoterete)
3.4 Proprietary Cementitious Materials
4.0 QUALITY CONTROL, TESTING AND INSPECTION
441 Quality Control
4.2 Testing and Inspection
‘UNCONTROLLED DOCUMENT WHEN PRINTED (26-Jan-06) CONTROLLED DOCUMENT IN JPI EWR 100-2004-001 — 2.4.4.7
Fle Name: STD_FB-M-5305 -.Rev_1
Feproofing_of_Stuctures_and Equipment DOC Page 2 of 12a
SUNCOR
Eueney TECHNICAL STANDARD
‘Subject amber RevsIOnE
FIREPROOFING OF STRUCTURES AND EQUIPMENTS FB-M-5305 4
1.0 GENERAL
4.4 SCOPE
12
13
134
This standard covers the requirements for materials and installation of fireproofing of
structures and equipment in fire hazard zones on the Suncor Energy Inc. Firebag Projects.
The criteria and extent of fireproofing of structures and equipment are covered in the Suncor
Energy Inc. Fire Protection and Prevention Standard. Std No. 0060.
DEFINITIONS
1. The “Owner” — means Suncor Energy inc. or it's designated representative.
2. “Owner's Engineer” — means the person responsible for the technical integrity of the
Project.
3. “Owner's Inspector” - means the person authorized for inspection.
4. The “Contractor” - means the entity, erector, manufacturer, fabricator, vendor or
supplier that supplies the material or services, including all subcontractors.
5. “Local Authorities” - means the Govemmental Regulatory Authority controlling Laws,
Codes, rules or regulations for fireproofing of structures and equipment in the Province of
Alberta.
CODES AND STANDARDS
The fireproofing of structures and equipment, including materials and installation, shall
conform to all applicable industrial codes, standards and specifications including those listed
below. Each publication shall be the latest revision and addendum, including supplements, if
any.
Alberta Building Code (ABC)
Alberta Fire Code (AFC)
Alberta Occupational Health and Safety Act (OH&S), General Safety Regulations.
‘UNCONTROLLED DOCUMENT WHEN PRINTED (26-Jan-06) CONTROLLED DOCUMENT IN JPI EWR 100-200-001 24-47
File Name: STD_FB-M-5305_- Rov
Fieproofing_of Stuctures_and_Equlpment00C Pago 3 of 12Fae
SuNcoR TECHNICAL STANDARD
‘Subject Nomber Revision:
FIREPROOFING OF STRUCTURES AND EQUIPMENTS FB.M-5305 1
National Fire Protection Association (NFPA)
NFPA 321 - Basic Classification of Flammable and Combustible Liquids
Underwriters Laboratories Inc. (UL)
UL 1709 - Rapid Rise Fire Tests of Protection Materials for Structural Stee!
UL Fire Resistance Directory
Industrial Risk Insurers (IRI)
IR Information Bulletin IM.2.5.1, Fireproofing for Hydrocarbon Fire Exposures
‘American Petroleum Institute (API)
‘API Publication 2218, Fireproofing Practices in Petroleum and Petrochemical Processing
Plants.
‘American Society for Testing and Materials (ASTM)
‘ASTM A641 Standard Specification for Zinc-Coated (Galvanized) Carbon Stee!
Wire
ASTM C309 Standard Specification for Liquid Membrane-Forming Compounds
for Curing Concrete
ASTM D790 Standard Test Methods for Flexural Properties of Unreinforced
and Reinforced Plastics and Electrical Insulating Materials
ASTM D2240 Standard Test Method for Rubber Property- Durometer Hardness
ASTM E605 Standard Test Methods for Thickness and Density of Sprayed
Fire Resistive Material Applied to Structural Members
Canadian Standards Association (CSA)
CSA A23.1 Construction Materials and Methods of Concrete Construction
CSA A23.2 Methods of Test for Concrete
CSA G30.3 Cold Draw Steel Wire for Concrete Reinforcement
CSA G30.5 Welded Steel Wire Fabric for Concrete Reinforcement
CSAG30.18 _Billet Stee! Bars for Concrete Reinforcement
‘American Concrete Institute (ACI)
‘ACI 506.2 ‘Specification for Shotcrete
ACI 506.3 Guide to Certification of Shotcrete Nozzlemen
Suncor Health, Environmental and Safely Standards (HES)
FPC-203, Refinery Fire Protection
Steel Structure Painting Council (SSPC)
SSPC Specification SP6, Commercial Blast Clear
UNCONTROLLED DOCUMENT WHEN PRINTED (26
Firebag Program Lead Civil Engineer Fe
2. | Engineer None (Also sign front
Parm Parmar page of TS) Fe.
Firebag Program Lead Civil Engineer enn
3. | Reviewer (Also sign front
Dave Tullis page of TS) AQ YTAK
Firebag Engineering Manager Ali loeb
4. | Approval Authority
Ken Hart (Also sign front Poff
Firebag Operations Manager page of TS)
5. | Return to
Rita Lewis
Jacobs Canada Heritage Square
Calgary
Attachment — Revised Firebag Standard No. FB-M-5305 Rev 1, Issue Date 6-Sep-05
[ TNCONTROLLED DOCUMENT WHEN PRINTED (5-JAN-06) CONTROLLED DOCUMENT INEWR FILE LOCATION]
Form EWR 100-200-001 ~2-4-4--FO- Rew Page: tof]