Professional Documents
Culture Documents
Features:
• General purpose resistor ideal for commercial/industrial applications
• Flame retardant coatings standard
• Flameproof version available as CFF and CFFM
• Panasert available on selected sizes - contact Stackpole
• Auto sequencing/insertion compatible
• CFM (mini) ideal choice when size constraints apply
• Cut and formed product is available on select sizes - contact Stackpole
• Standard lead wire for CF and CFM is copper plated steel,
with 100% tin over plate
• 100% tin plate on copper wire is available as type CFQ and CFQM
• RoHS compliant, lead free and halogen free
Electrical Specifications - CF
Maximum Maximum Dielectric Ohmic Range (Ω) and
Power Rating (W) Working
Type/Code Size Overload Withstanding TCR (ppm/ºC) per Ohmic Range Tolerance
@ 70ºC (1)
Voltage (V) Voltage (V) Voltage (V) 2% 5%
CF, CFQ 18 0.125 250 500 350 < 10 Ω = ±400 ppm/ºC 10 - 1M 1 - 22M
CF, CFQ, PCF 14 0.25 350 600 350 10 Ω to 9.99K Ω = 0 ~ -400 ppm/ºC 1 - 1M 1 - 22M
CF, CFQ 12 0.5 350 700 600 10 K Ω to 99K Ω = 0 ~ -500 ppm/ºC 10 - 1M 1 - 22M
CF, CFQ 1 1 500 1000 600 100 K Ω to 999K Ω = 0 ~ -850 ppm/ºC 1 - 1M 1 - 10M
CF, CFQ 2 2 500 1000 600 1M Ω and above = 0 ~ -1500 ppm/ºC 1 - 1M 1 - 10M
(1) Lesser of √ P*R or maximum working voltage.
Mechanical Specifications
A B C
Type/Code Size D - Lead Diameter Unit
Body Length Body Diameter Lead Length (Bulk)
0.016 ± 0.003 inches
CF
0.130 ± 0.012 0.067 ± 0.012 0.40 ± 0.08 mm
18
3.30 ± 0.30 1.70 ± 0.30 0.018 ± 0.003 inches
CFQ
0.45 ± 0.08 mm
0.126 ± 0.008 0.073 ± 0.008 0.018 ± 0.002 inches
CFF 18
3.20 ± 0.20 1.85 ± 0.20 0.45 ± 0.05 mm
0.236 ± 0.012 0.091 ± 0.012 0.022 ± 0.003 inches
CF, CFF, CFQ, PCF
6.00 ± 0.30 2.30 ± 0.30 0.55 ± 0.08 mm
0.126 ± 0.008 0.073 ± 0.008 1.102 ± 0.118 0.018 ± 0.002 inches
CFFM
3.20 ± 0.20 1.85 ± 0.20 28.00 ± 3.00 0.45 ± 0.05 mm
14
0.016 ± 0.003 inches
CFM
0.130 ± 0.012 0.067 ± 0.012 0.40 ± 0.08 mm
3.30 ± 0.30 1.70 ± 0.30 0.018 ± 0.003 inches
CFQM
0.45 ± 0.08 mm
0.022 ± 0.003 inches
CF
0.335 ± 0.039 0.106 ± 0.020 0.55 ± 0.08 mm
8.50 ± 1.00 2.70 ± 0.50 0.028 ± 0.004 inches
CFF, CFQ 12
0.70 ± 0.10 mm
0.236 ± 0.012 0.091 ± 0.012 0.022 ± 0.003 inches
CFM, CFQM, CFFM
6.00 ± 0.30 2.30 ± 0.30 0.55 ± 0.08 mm
0.433 ± 0.039 0.177 ± 0.020 1.181 ± 0.118 0.031 ± 0.004 inches
CF, CFQ
11.00 ± 1.00 4.50 ± 0.50 30.00 ± 3.00 0.80 ± 0.10 mm
1
0.354 ± 0.020 0.138 ± 0.020 1.102 ± 0.118 0.028 ± 0.002 inches
CFM, CFQM
9.00 ± 0.50 3.50 ± 0.50 28.00 ± 3.00 0.70 ± 0.05 mm
0.591 ± 0.039 0.197 ± 0.020 1.339 ± 0.157 0.031 ± 0.004 inches
CF, CFQ 2
15.00 ± 1.00 5.00 ± 0.50 34.00 ± 4.00 0.80 ± 0.10 mm
Performance Characteristics
Test Test Method Typical Result Test Limit
MIL-STD 202, 1Ω ~ 91KΩ 100KΩ ~ 910KΩ 1MΩ ~ 22MΩ 1Ω ~ 91KΩ 100KΩ ~ 910KΩ 1MΩ ~ 22MΩ
Current Noise
Method 308 0.15μ V/V 0.32μ V/V 0.54μ V/V 0.2μ V/V 0.4μ V/V 0.6μ V/V
JIS C5201-1,
Short Time Overload < ± 0.25% ≤ ± (0.75% + 0.05Ω)
IEC60115-1, 4.13
Resistance to JIS C5201-1,
< ± 0.3% ≤ ± (0.5% + 0.05Ω)
Soldering Heat IEC60115-1, 4.18
Rapid Change of JIS C5201-1,
< ± 0.3% ≤ ± (1% + 0.05Ω)
Temperature IEC60115-1, 4.19
JIS C5201-1, R < 100KΩ: ≤ ± (2% + 0.05Ω)
Endurance at 70°C < ± 1%
IEC60115-1, 4.25.1 R ≥ 100KΩ: ≤ ± (3% + 0.05Ω)
MIL-STD 202,
Terminal Strength < ± 0.2% ≤ ± (0.5% + 0.05Ω)
Method 211
JIS C5201-1, R < 100KΩ: ≤ ± (3% + 0.05Ω)
Damp Heat (Steady state) < ± 1.5%
IEC60115-1, 4.24 R ≥ 100KΩ: ≤ ± (5% + 0.05Ω)
Operating temperature range is -55C to +155C
60
40
20
155ºC
0
-60 0 20 40 60 80 100 120 140 160 180
Ambient Temperature (ºC)
This information is intended as a reference for solder profiles for Stackpole resistive components. These profiles should
be compatible with most soldering processes. These are only recommendations. Actual numbers will depend on board
density, geometry, packages used, etc., especially those cells labeled with “*”.
CF12 430W
1K
CFM12, CF14 285W
CFM14, CF18 115W
100
10
1
1μ 10μ 100μ 1m 10m 100m 1
Pulse Duration (sec)
Typical performance for reference only.
If repetitive pulses are applied to resistors, pulse wave form must be less than “Pulse limiting voltage”, “Pulse limiting
current” or “Pulse limiting wattage” calculated by the formula below.
Vp = K√P x R x T/t
lp = K√P/R x T/t
Pp = K2 x P x T/t
2. Damping oscillation wave with time constant of envelope “t” → Square wave
Current Noise:
0.8
0.4
0.2
0
1K 10K 100K 1M 10M
Nominal Resistance (Ω)
Packaging Specifications
Dimension "E": This is a non-critical dimension that does not have a tolerance in the standard.
Range of diameters is from 0.547 inches (13.90 mm) to 1.500 inches (38.10 mm).
(1) Reference value only. The "A" dimension shall be governed by the overall length of the taped component.
The distance between flanges shall be 0.059 inches (1.50 mm) to 0.315 (8.00 mm) greater than the overall component.
(2) The given dimension "D" expresses the standard width spacing. A 26 mm narrow spacing is available as option "N" packaging code.
Contact Stackpole for more details.
Measurement Point
RoHS Compliance
Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various
regulatory requirements now prevalent, such as the European Union’s directive regarding “Restrictions on Hazardous Substances”
(RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability of our
compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament as
amended by Directive (EU) 2015/863/EU as regards the list of restricted substances.
Compliance to “REACH”
We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and
compliant with the requirements of EU Directive 1907/2006/EC, “The Registration, Evaluation, Authorization and Restriction of
Chemicals”, otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List.
Environmental Policy
It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive
to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment
and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution.
How to Order
1 2 3 4 5 6 7 8 9 10
C F 1 2 J T 1 0 0 K