Professional Documents
Culture Documents
MODEL DESCRIPTION........................................................................PAGE
Series 20 20 GPM Stack Type Directional Control Valve...............................................V3
Series 20 20 GPM Load Sense Stack Type Direction and Control Valve.....................V11
Series 20 20 GPM Solenoid Operated Work Section...................................................V15
Model SV 12 GPM Stack Type Directional Control Valve.............................................V18
Model SV 12 GPM Solenoid Operated Work Section...................................................V29
Stack Valve Assembly Quotation Request Form..........................................V35
RD5100 30 GPM Single Spool Mono-Block Directional Control Valve.......................V36
RD5200 25 GPM Two Spool Mono-Block Direction Control Valve.............................V36
RD5300 25 GPM Three Spool Mono-Block Directional Control Valve.......................V36
RD5000 Solenoid Operated 1, 2, or 3 Spool Mono-Block Valve................................V44
RD4100 15 GPM Single Spool Mono-Block Directional Control Valve.......................V45
LVS 11 GPM Two Spool Mono-Block Loader Valve.............................................V48
LVT 10 GPM Two Spool Mono-Block Loader Valve............................................V50
LVR 14 GPM Two Spool Mono-Block Loader Valve............................................V51
LS3000 25 GPM Single Spool Log Splitter Control Valve.........................................V53
RD2500 20 GPM Single Spool Mono-Block Directional Control Valve.......................V55
FR10-3P Priority Flow Regulator 15 GPM...................................................................V57
RD-100 30 GPM Adjustable Flow Control.................................................................V58
RD-1900 30 GPM Adjustable Flow Control.................................................................V58
VALVES
CATV 2-09-04-01
V2 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
Directional Control Valves
SECTIONAL BODY
VALVES
Series “20””
STANDARD FEATURES
• 1 -10 Work Sections • Extra Fine Spool Metering
• Power Beyond Capability • Reversible Handle
• Load Checks on Each Work Port • Hard Chrome Plated Spools
• A Float Section can be Installed in any Location in Valve Assembly
• Interchangeable Mounting With Other Popular “20” gpm Stack Valves
• Optional Work Section with Pilot Operated Checks
SPECIFICATIONS
Parallel or Tandem Circuit Foot Mounting
Pressure Rating Weight
Maximum Operating Pressure....... 3500 psi Inlet Cover............................ Approx 6 lbs
Maximum Tank Pressure.................. 500 psi Outlet Cover...................... Approx 3.5 lbs
Work Section........................ Approx 9 lbs
port
SERIES relief cartridges
20 hardware and seal kits
660190003 SPRING CENTER KIT 660585006 SOLENOID PILOT PASSAGE SEAL KIT INLET relief kits
660190004 3 POSITION DETENT KIT 660390103 20 WORK SECT COIL & CART ASSY 12VDC/LEADS 660290001 NO RELIEF PLUG
660190005 FRICTION DETENT KIT 660390107 20 WORK SECT COIL & CART ASSY 24VDC/LEADS 660290101 SHIM ADJ. 500 - 1350 PSI
660190028 SPRING CTR PNEUMATIC ACTUATOR KIT 660290010 20 UTIL SECT CONTINUOUS ON PBU CART 660290103 SHIM ADJ. 1351 - 1750 PSI
660190001 VERTICAL HANDLE, LINK & PINS 660390153 20 UTIL SECT PBU COIL & CART ASSY 12VDC/LEADS 660290105 SHIM ADJ. 1751 - 2200 PSI
660190002 STD. HANDLE, LINK & PINS 660390157 20 UTIL SECT PBU COIL & CART ASSY 24VDC/LEADS 660290107 SHIM ADJ. 2201 - 3000 PSI
660190006 COMPLETE VERT. HANDLE KIT 270006092 20 UTIL SECT PRESSURE REDUCING CART 660290201 ADJUSTABLE 500 - 1350 PSI
660190007 COMPLETE STD. HANDLE KIT 660290012 20 UTIL SECT POWER BEYOND PLUG #10 SAE 660290203 ADJUSTABLE 1351 - 1750 PSI
660190025 SEAL RETAINER PLATE 660290205 ADJUSTABLE 1751 - 2200 PSI
660190026 HANDLE CLEVIS port relief kits
660290207 ADJUSTABLE 2201 - 3000 PSI
660290004 POWER BEYOND PLUG #10 SAE 660290002 NO RELIEF LOAD CHECK PLUG
660290017 POWER BEYOND PLUG 3/4” NPTF 660290301 SHIM ADJ. 500 - 1350 PSI relief HARDWARE kits
660290005 CLOSED CENTER PLUG 660290303 SHIM ADJ. 1351 - 1750 PSI 660190024 SHIM STYLE TO ADJ STYLE
660290006 OPEN CENTER OUTLET PLUG 660290305 SHIM ADJ. 1751 - 2200 PSI CONVERSION KIT
660585001 WORK SECTION SEAL KIT 660290307 SHIM ADJ. 2201 - 3000 PSI 672000201 .006 SHIM FOR RELIEF
660585008 LOCK SECTION SEAL KIT 660290401 ADJUSTABLE 500 - 1350 PSI 672000202 .010 SHIM FOR RELIEF
660590030 SOLENOID OPERATED SECTION SEAL KIT 660290403 ADJUSTABLE 1351 - 1750 PSI 672000203 .018 SHIM FOR RELIEF
660585002 INLET SECTION SEAL KIT 660290405 ADJUSTABLE 1751 - 2200 PSI 672000205 .041 SHIM FOR RELIEF
660585003 OUTLET SECTION SEAL KIT 660290407 ADJUSTABLE 2201 - 3000 PSI
660585004 SEAL KIT 0-RINGS BETWEEN SECTION ONLY 660290003 ANTI-CAVITATION CARTRIDGE LOAD SENSE kits
660290018 LOAD SENSE PLUG W/DRAIN ORIFICE
RELIEF CARTRIDGES ARE ALSO AVAILABLE WITH STAINLESS STEEL RELIEF SPRINGS. 660290019 LOAD SENSE PLUG W/O DRAIN ORIFICE
CATV 4-09-04-01
V4 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 11 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
special sections available:
Valves other than standard models listed can be made to order. Use order code Matrix below to generate a model number
that meets your requirements. If you prefer, contact your Sales Representative with your specific requirements and a model
number will be assigned for you. This model number can then be used for future orders. A minimum order quantity will apply
to special valves. Please consult Sales Representative.
VALVES
N - SPRING CENTER DETENT OUT EXAMPLE: 20=2000 PSI
P - 2 POSITION DETENT NEUTRAL & IN (NO OUT POSITION) “A” PORT RELIEF PRESSURE IN HUNDREDS
HANDLE OPTIONS EXAMPLE: 18=1800 PSI
1 - STANDARD LEVER HANDLE*
2 - LESS HANDLE ONLY
3 - LESS COMPLETE HANDLE * LEVERS ARE COATED WITH BLACK RUBBER
4 - VERTICAL LEVER HANDLE* ** L WORK SECTION REQUIRES SPOOL TYPE C & PORT RELIEFS NOT AVAILABLE
7 - BLANK FOR OPTIONAL JOYSTICK HANDLE *** MICROSWITCH INCLUDED.
valve assemblies
The Series 20 sectional body directional control valve can be ordered as separate sections as outlined or as a complete factory tested assembly.
This will need to be specified with each order. An assembly model number will be assigned at the time of the order. This assembly number can then
be used for future orders.
ASSEMBLY MODEL NUMBER 20A - X X X X
XXXX = Sequence of Numbers. This number will be assigned to final valve to be assembled and tested at the factory. Each new order or
quote will be assigned a new assembly model number.
CATV 5-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V5
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 11 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
cross section of 20p1ba1da parallel work section
VALVES
B
SPOOL OPTION 'A' - 3 WAY 3 POSITION FOR USE WITH SINGLE
ACTING CYLINDERS OR NON-REVERSIBLE MOTORS. THE 'B' WORK
OPTION N- PORT IS BLOCKED IN NEUTRAL.
DETENT
SPOOL-OUT W/
SPRING CENTER
SPOOL OPTION A
SPOOL OPTION B
SPOOL OPTION C
SPOOL OPTION D
CATV 6-09-04-01
V6 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
cross section of tandem work section and lock section
THE TANDEM SECTION BODY A WORK PORT THE LOCK SECTION BODY A WORK PORT
HAS A "T" ON THE LEFT HAS AN "L" ON THE LEFT
B WORK PORT SIDE OF THE "B" WORK B WORK PORT
SIDE OF THE "B" WORK THE CASTING NUMBER
PORT PORT
"C-638" IS ON THE
RIGHT SIDE OF WORK
SHOWN WITH THE CASTING NUMBER SECTION BODY
MICRO-SWITCH "C-637" IS ON THE
OPTION J RIGHT SIDE OF WORK
SECTION BODY
combined parallel/
model 20p parallel circuit model 20t tandem circuits
tandem circuits
Parallel circuit construction is the most common. Tandem circuit construction is also referred to Parallel and tandem circuit work sections can
When any one of the spools in a valve bank is as priority circuit. When the spool of a section is be combined in the same valve bank. Below the
shifted it blocks off the open center passage. The shifted, oil is cut off to all downstream sections. 1st and last sections are parallel and the 2nd
oil then flows into the parallel circuit core making Thus the section nearest to the inlet has priority is tandem. The 1st parallel section has priority
oil available to all spools. If more than one spool over the other sections in the valve bank. If more over the other two. The 2nd and 3rd sections
is fully shifted then oil will go to the section with than one spool is fully shifted all the oil will go to are in parallel with each other. If the spool of the
the lowest pressure requirements. It is possible, the section nearest to the inlet. Metering the up 1st section is shifted it will cut off oil to the other
however, to meter flow to the spool with the stream section will allow two sections to operate two. If the spools of the 2nd and 3rd section are
least load and power two unequal loads. The at the same time. The schematic below shows a both shifted oil will go to the one with the least
schematic below shows a three section parallel three section tandem circuit stack valve. resistance. It should be noted that it is the section
circuit stack valve. just prior to the tandem section that has priority,
THE POWER CORE OF A not the tandem section. Further if a parallel section
THE POWER CORE OF ALL
is placed just after a tandem, the two sections will
VALVES
SECTIONS IN THE VALVE STACK WORK SECTION IS FED BY
THE OIL EXITING THE OPEN be in a parallel.
ARE CONNECTED TOGETHER
BY THE PARALLEL CORE THAT CENTER OF THE ADJACENT 20P PARALLEL WORK SECTIONS
RUNS THROUGH THE LENGTH UPSTREAM WORK SECTION
OF THE VALVE 20T TANDEM WORK SECTION
CATV 7-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V7
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
INLET COVER DIMENSIONS work sections DIMENSIONS
TOP INLET PART NUMBER WILL BE
TOP OUTLET STAMPED IN THIS LOCATION
2.69 TOP INLET TOP OUTLET
TOP INLET TOP OUTLET PART PART
NUMBER NUMBER WILL BE
WILL BE
PART STAMPED
PART
NUMBER
STAMPED INBE
INNUMBER
WILL
THIS THIS LOCATION
WILL BE
LOCATION
2.69 2.69TOP INLET
TOP INLETTOP OUTLET
TOP OUTLET
STAMPEDSTAMPED IN THIS LOCATION
IN THIS LOCATION
2.69 2.69
.50
.34 1.75
.50 .50
.50 .50 .34 1.75 1.75
.34
SYSTEM RELIEF .34 .34 1.75
1.75
1.13 1.44
.344 DIA SYSTEM
SYSTEM RELIEF
RELIEF B WORK PORT 2.88 A WORK PORT
2.25
1.13 1.13 SYSTEMSYSTEM
RELIEF RELIEF 1.44 1.44
.344 DIA
.344 DIA B WORK
B WORK PORTPORT 1.44
2.88 2.88 1.44 A WORK
A WORK PORTPORT
1.13 2.251.13
2.25 A WORK PORT 2.88
RELIEF OPTION
.344 DIA .344 DIA 2.25 B WORKBPORT
WORK PORT 2.88 A WORKAPORTWORK
SPOOLPORT TRAVEL
INLET 2.25 OUTLET
IN TANK B WORK PORT RELIEF OPTION
A WORK
A WORK PORTPORT
RELIEFRELIEF
OPTIONOPTION.312 TO WORK
SPOOL TRAVEL
APORT
WORK PORT OPTION
RELIEF OPTION SPOOL
.531 TO TRAVEL
FLOAT
INLETINLET OUTLET
OUTLET B WORK A
PORT WORK
RELIEF RELIEF
OPTION SPOOL .312
SPOOL
.312TRAVEL TOTRAVEL
TO WORK WORK
IN IN TANK TANK B WORK PORT RELIEFB OPTION A
INLET INLET IN TANK
OUTLET OUTLET B WORKBPORT
WORK PORT OPTION
RELIEF RELIEF OPTION .312.531
TOTO.531
.312
WORK
FLOATFLOAT
TO WORK
IN TANK
B B A A .531 TO FLOAT
.531 TO FLOAT
P
3.06 B B A A
P
3.06 3.06
P
P P 4.25
3.06 .813.06
4.25 4.25
.81 .81 IN 4.25 4.25
.81 .81 IN 1.88 .250 DIA
IN .88 1.44 2.75 1.00
.88IN .283 .250
DIA DIA
IN
1.88 1.88 1.75
.88 .88 2.56 5.50 1.701.00 .250 DIA
1.75
.88 .88 1.88 1.88 1.44 1.44 2.75 2.75 1.00 DIA .250
.250.283 .283DIA
DIA
.88 1.75.88 1.44 1.44 2.75 2.751.00 1.00 DIA
.88 1.75.88 1.75 2.56 2.56 5.50 5.50 1.70 1.70 .283 DIA .283 DIA
PART NUMBER WILL BE 1.75 1.75 1.75 1.75 2.56 2.56 5.50 5.50 1.70 1.70
STAMPED IN THIS LOCATION1.75
PART PART
NUMBER NUMBER WILL BE
WILL BE
PART STAMPED
PART
NUMBER
STAMPED INBE
INNUMBER
WILL
THIS THIS LOCATION
WILL
LOCATIONBE
STAMPEDSTAMPED IN THIS LOCATION
IN THIS LOCATION
dimensional data outlet
5.38 cover dimensions
2.69
5.38 5.38 5.38
5.38 5.38 2.69 2.69
2.69 5.38 5.38 2.69 2.69
5.38 5.38 1.00
2.69 2.69
2.69 2.69 1.00 1.00
1.00 1.00 1.00 .344 DIA (2) LOCATION FOR
1.00 1.00 OUTLET PORT .344(2)DIA (2)
.344 DIA POWER BEYOND
LOCATION
LOCATION
OUTLET ORFOR FOR
1.00 1.00 .344 DIA .344
(2) DIA (2)
VALVES
IN TANK
8.25
IN IN TANK TANK
2.25 IN IN TANK TANK 8.25 8.25
8.25 8.25
4.382.25 2.25
2.25 4.382.25
4.38.81
4.38 4.38 1.25
IN
.81 .81 1.25 1.25
.81 .81 IN .88 IN 1.25 1.25
.88
IN IN
SEE CHART COLUMN B
.88 .8812.13
.88.88 .88 .88 SEE CHART
SEE CHART COLUMN
COLUMN B B
.88 13.22.88 12.13 12.13 SEECOLUMN
SEE CHART CHART COLUMN
B B
12.13 12.13
13.22 13.22
13.22 13.22
CATV 8-09-04-01
V8 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
work port relief cartridges inlet relief cartridges
OPTION K ANTI-CAVITATION CHECK OPTION A NO RELIEF
This option allows oil to be drawn from the tank When no main inlet relief is required the no relief
core into the work port if there is a vacuum on plug is installed. All inlet sections have the relief
the work port. This vacuum would be caused by cavity machined so a inlet relief can be installed
a overrunning motor or cylinder. The check will in the field.
be open whenever the pressure in the tank core
is higher than that in the work port.
OPTIONS B, C, D, AND E, SHIM ADJUSTABLE INLET RELIEF
OPTIONS B, C, D, AND E, SHIM ADJUSTABLE PORT RELIEF These options provide for an internally
shim adjustable main inlet relief. The relief
A port relief can be installed to limit the is a hydraulically dampened differential
pressure at the work port to less than the poppet design. This provides for smooth
system pressure. Also, it can be installed quiet operation in a relief that is moderately
to provide spike pressure protection when tolerant to contamination. The pressure of
the spool is in the neutral position. The these reliefs can be changed, within the
pressure of these reliefs can be changed specified range, by changing shims. This relief is also available with
by changing shims. stainless steel relief springs, consult factory.
OPTIONS F, G, H, AND J, ADJUSTABLE PORT RELIEF
This is the same OPTIONS F, G, H, AND J, ADJUSTABLE RELIEF
differential poppet type
relief as above but This is the same relief as
externally adjustable above except it is
within the specified externally adjustable,
range. within the specified range.
VALVES
OPTION 1 STANDARD OPEN CENTER WITH CONVERSION PLUG
This is the standard outlet option. This option allows for conversion in the
field for power beyond or closed center applications. When the spools are
in neutral the inlet is unloaded to tank.
OPTION 3 CLOSED CENTER OUTLET
This option provides for closed center operation. This is typically used with a
variable displacement pressure compensated pump or in a system with an
unloading valve. When the spools are in neutral the inlet port is blocked.
OPTION 2 POWER BEYOND WITH #10 SAE BEYOND PORT
This option provides for a high pressure power beyond port. This would be used
if a valve is to be added downstream. The outlet must be connected to tank.
When the spools are in neutral the inlet is connected to power beyond port.
MID-INLET
MID-INLET RELIEF
RELIEF OPTIONS:
OPTIONS:
Install
Install pipepipe
plugplug in this
in this location
location OPTION
STD.
STD. SETTING
SETTING
OPTION NO.NO. RELIEF
RELIEF TYPE
TYPE @ GPM
10 GPM
for for Flow
Flow Option
Option 'C' 'C' (Combined)
(Combined) @ 10
"BLANK"
"BLANK" BODY
BODY LESS
LESS RELIEF
RELIEF CARTRIDGE/PLUG
CARTRIDGE/PLUG -- --
A A NO-RELIEF
NO-RELIEF PLUG
PLUG -- --
B B SHIM
SHIM ADJUSTABLE
ADJUSTABLE 500-1350
500-1350 PSIPSI 13501350
PSIPSI
C C SHIM
SHIM ADJUSTABLE
ADJUSTABLE 1350-1750
1350-1750 PSIPSI 17501750
PSIPSI
D D SHIM ADJUSTABLE 1750-2200 PSIPSI
SHIM ADJUSTABLE 1750-2200 2200 PSIPSI
2200
E E SHIM ADJUSTABLE 2200-3000 PSIPSI
SHIM ADJUSTABLE 2200-3000 2500 PSIPSI
2500
5.565.56 F ADJUSTABLE 500-1350
F ADJUSTABLE 500-1350 PSIPSI 13501350
PSIPSI
Section
Section cancan
be be converted
converted from
from CC Install
Install pipepipe
plugplug
in in G G ADJUSTABLE
ADJUSTABLE 1350-1750
1350-1750 PSIPSI 17501750
PSIPSI
to S,
to S, or or
S toS C,
to C, prior
prior to installing
to installing thisthis location
location for for Flow
Flow H H ADJUSTABLE
ADJUSTABLE 1750-2200
1750-2200 PSIPSI 22002200
PSIPSI
Option
Option 'S' 'S' (Split)
(Split) J J ADJUSTABLE
ADJUSTABLE 2200-3000
2200-3000 PSIPSI 25002500
PSIPSI
section
section in the
in the stack
stack valve
valve assy.
assy. K K ADJUSTABLE
ADJUSTABLE 3000-3500
3000-3500 PSIPSI 32503250
PSIPSI
test data
P PT INLET
T INLET TO OUTLET
TO OUTLET PRESSURE
PRESSURE DROP
DROP P PT INLET
T INLET TO OUTLET
TO OUTLET PRESSURE
PRESSURE DROP
DROP
350 350 350 350
LEFT
LEFT 'IN' LEFT
'IN' TO TO LEFT 'OUT'
'OUT' LEFT
LEFT 'IN' RIGHT
'IN' TO TO RIGHT 'OUT'
'OUT'
VALVES
PSI
PSI
PSI
4 SECTION
4 SECTION 4 SECTION
4 SECTION
200 200 200 200
2 SECTION
2 SECTION 2 SECTION
2 SECTION
150 150 150 150
VALVES
Series “20””
STANDARD FEATURES
• Extended Length Notches for Very Fine Metering • Low Spool Actuating Forces
• Machined Internal Lands for Precise • Use of Standard Series 20 Inlet Sections
Control and reduced Dead Band (20I) and Tie Rod Kits
• Low Standby Pressures • Same Mounting Pattern and Envelope as
• Spool Design for reduced Flow Forces Standard Series 20 Valve
SPECIFICATIONS
Pressure Rating Foot Mounting
Maximum Operating Pressure 3500 psi Maximum Operating Temp.......................180°F
Maximum Tank Pressure................... 500 psi
Nominal Flow Rating ............................20 GPM 20LP Section Weight................. Approx 10.1 Ibs.
Please Refer to Pressure Drop and Flow 20LE Section Weight................... Approx 4.3 Ibs.
Charts for Your Application
CATV 11-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V11
O.E.M. CUSTOMER SERVICE: (712) 233-2181 • FAX (605) 235-1082 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
special sections available:
Valves other than standard models listed can be made to order. Use order code Matrix below to generate a model number
that meets your requirements. If you prefer, contact your Sales Representative with your specific requirements and a model
number will be assigned for you. This model number can then be used for future orders. A minimum order quantity will apply
to special valves. Please consult Sales Representative.
WORK SECTION 2 0 XX X X X X X X
WORK SECTION TYPE PORT RELIEF “B”
LP-STANDARD LOAD SENSE SECTION
PORT RELIEF “A”
PORT SIZE A - NO RELIEF
1. #10 SAE (7/8-14 THREAD) B - SHIM ADJUSTABLE RELIEF 500-1350 PSI SET AT 1350
2. #8 SAE (3/4-16 THREAD) C - SHIM ADJUSTABLE RELIEF 1351-1750 PSI SET AT 1750
3. #12 SAE (1 1/16-12 THREAD) D - SHIM ADJUSTABLE RELIEF 1751-2200 PSI SET AT 2200
4. 1/2 NPTF (2000 PSI MAX) E - SHIM ADJUSTABLE RELIEF 2201-3000 PSI SET AT 2500
5. 3/8 NPTF (2000 PSI MAX) F - ADJUSTABLE RELIEF 500-1350 PSI SET AT 1350*
SPOOL TYPE G - ADJUSTABLE RELIEF 1351-1750 PSI SET AT 1750*
H - 3 WAY 3 POSITION H - ADJUSTABLE RELIEF 1751-2200 PSI SET AT 2200*
J - 4 WAY 3 POSITION J - ADJUSTABLE RELIEF 2201-3000 PSI SET AT 2500*
K - 4 WAY 3 POSITION FREE FLOW MOTOR K - ANTI-CAVITATION CHECK
M - 4 WAY 4 POSITION FLOAT (USE W/D L - PORT RELIEF/ANTI-CAV SHIM ADJ 500-1350 PSI SET AT 1350
SPOOL ACTION) M - PORT RELIEF/ANTI-CAV SHIM ADJ 1351-1750 PSI SET AT 1750
N - PORT RELIEF/ANTI-CAV SHIM ADJ 1751-2200 PSI SET AT 2200
SPOOL ACTIONS R - PORT RELIEF/ANTI-CAV SHIM ADJ 2201-3000 PSI SET AT 2500
A - SPRING CENTER TO NEUTRAL S - PORT RELIEF/ANTI-CAV ADJUSTABLE 500-1350 PSI SET AT 1350*
B - 3 POSITION DETENT T - PORT RELIEF/ANTI-CAV ADJUSTABLE 1351-1750 PSI SET AT 1750*
C - FRICTION DETENT W - PORT RELIEF/ANTI-CAV ADJUSTABLE 1751-2200 PSI SET AT 2200*
D - FLOAT DETENT Y - PORT RELIEF/ANTI-CAV ADJUSTABLE 2201-3000 PSI SET AT 2500*
E - SPRING CENTER PNEUMATIC ACTUATOR
F - 2 POSITION DETENT NEUTRAL & OUT *ADJUSTABLE PORT RELIEF CARTRIDGES CANNOT
(NO IN POSITION) BE USED ON THE “A” PORT END OF WORK SECTION
J - SPRING CENTER W/MICROSWITCH WHEN THE STANDARD LEVER HANDLE IS USED
(SWITCHES ON IN OR OUT)*** BECAUSE OF INTERFERENCE
K - SPRING CENTER W/MICROSWITCH
VALVES
(SWTCHES ON SPOOL IN ONLY )*** FOR WORK PORT RELIEF SETTING OTHER THAN STANDARD
M - SPRING CENTER DETENT IN
N - SPRING CENTER DETENT OUT 20P1BA1DH-18-20
P - 2 POSITION DETENT NEUTRAL & IN “B” PORT RELIEF PRESSURE IN HUNDREDS
(NO OUT POSITION) EXAMPLE: 20=2000 PSI
“A” PORT RELIEF PRESSURE IN HUNDREDS
HANDLE OPTIONS EXAMPLE: 18=1800 PSI
1 - STANDARD LEVER HANDLE*
2 - LESS HANDLE ONLY
3 - LESS COMPLETE HANDLE * LEVERS ARE COATED WITH BLACK RUBBER
4 - VERTICAL LEVER HANDLE* ***MICROSWITCH INCLUDED.
7 - BLANK FOR OPTIONAL JOYSTICK HANDLE
PORT SIZE
1. #10 SAE (7/8-14 THREAD)
2. #12 SAE (1 1/16-12 THREAD)
3. 3/4 NPTF (2000 PSI MAX)
The Prince LE outlet includes a load sense port in a cartridge that is installed in the section. There are two versions of the cartridge, one with a load
sense line drain orifice and one without a drain orifice. There is normally a drain orifice in either the valve or the pump controls. Cartridges can be
changed in the field to change the configuration. Power beyond is not available in a load sense system.
CATV 12-09-04-01
V12 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 13 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
cross section of 20Lp1Ja1Aa LOAD SENSE work section
STANDARD HANDLE
VALVES
VARIOUS STANDARD SPOOL ATTACHMENTS
MODEL 20LP LOAD SENSE CIRCUIT
The Series 20LP work sections are specifically designed to be used with a pressure-flow compensated pump, commonly known as
a load sense pump. The valve is a parallel circuit, closed center design, where flow does not flow through the valve when the spools
are centered. A load sense signal line must be connected to the load sense port on the pump and to the load sense port on the 20LE
outlet section of the valve. The pressure-flow compensator portion of a load sense pump will maintain (within its flow and pressure
limitations) an output pressure equal to the pressure at the load sense port plus the load sense differential pressure. The differential
pressure is typically between 150 and 350 psi. The valve is designed so that when a spool is shifted, the pressure at the out flow work
port is presented to the valve’s load sense port. The valve incorporates logic and load sense check valves so that when multiple spools
are shifted, the highest pressure of any of the work ports is directed to the load sense port. A load sense line bleed orifice needs to
be present in either the Prince load sense outlet or the load sense pump controls. The bleed orifice will prevent high pressure from
being trapped in the load sense line and sending false signals to the pump.
There are a number of benefits to load sense systems, one of the primary ones being in the metering of the flow to the work ports.
Metering is typically accomplished when the flow passes through metering notches in the spool. In a load sense valve, the pressure
that drives the flow through the notches is typically limited to the relatively low and nearly constant differential pressure. This relatively
low differential pressure makes the notches more effective and gives more resolution in regard to spool travel versus flow out of the
work port. Also this “resolution” remains relatively the same regardless of the pressure required at the work port. The metering notches
in the Prince load sense valve have been optimized to give excellent metering characteristics over an extended portion of the spool
travel and over the full flow rating of the valve. The internal lands of the casting have also been machined to give repeatable, precise
control to the metering characteristics. Another benefit to load sense valves is that, in the minimum flow standby mode, the pump only
has to generate the rather low differential pressure
B thusA saving energyB as compared
A to typical open center or standard closed center
systems. In summary, the Prince load sense valve provides more precise control, conserves energy and reduces heat generation.
OUT
OUT IN
B A B A
OUT
OUT IN
LS
LS
CATV 13-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V13
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
LOAD SENSE OUTLET DIMENTIONS LOAD SENSE WORK SECTION DIMENSIONS
5.38
ø.344 (2)
2.69
1.38 1.75
1.00
1.44 .34
2.88
LOAD SENSE PORT
OUTLET PORT
4.25
1.25
TEST DATA
PRESSURE DROP - INLET TO WORK PORT PRESSURE DROP - WORK PORT TO TANK
300 120
PRESSURE DROP PSI
PRESSURE DROP PSI
VALVES
250 100
8 SECTIONS
200 80 8 SECTIONS
150 60
100 40
50 2 SECTIONS 20 2 SECTIONS
0 0
0 5 10 15 20 25 30 0 5 10 15 20 25 30
FLOW GPM FLOW GPM
25
FLOW (GPM)
10
250 PSI LOAD
SENSE
5
DIFFERENTIAL
0
0.00 0.05 0.10 0.15 0.20 0.25 0.30
SPOOL DISPLACEMENT (IN)
CATV 14-09-04-01
V14 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
JOYSTICK HANDLES FOR SERIES “20”
SPECIFICATIONS:
1-9 SECTIONS
20 GPM
VALVES
INTERNAL PILOT
INTERNAL DRAIN
CATV 15-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V15
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
series “20” solenoid operated work section
The Solenoid Operated Series 20 Work Section allows remote electrical on-off or manual control. The Solenoid Operated
Section contains two, 3 way-2 position solenoid cartridge valves and a pilot operated piston attached to the main control
spool. When both solenoids are de-energized both sides of the pilot piston are open to tank pressure and the spool
remains spring centered. When solenoid “A” is energized, pilot pressure is applied to one side of the pilot piston causing
the spool to shift from the neutral position to work port “A”. When solenoid “B” is energized, pilot pressure is applied to
the other side of the pilot piston causing the spool to shift to work port “B”. Internal pilot lines provide pilot pressure to the
solenoid actuator. Pilot pressure to initiate spool shift is generated by a “Pressure Build-Up Valve” that is installed in the
Utility Section, which must be installed between the last section and the outlet cover, (see Order Code). Two versions
of the Pressure Build-up Valve are offered. Options 1 & 2 supply approximately 300 PSI pilot pressure to the solenoid
actuator. Load induced pressure is required to complete the spool shift and hold the spool in the shifted position. For over
center or light load applications a restrictor installed in the work port or line may be required. Any manual sections must be
upstream of any solenoid sections in the stack valve assembly. Consult your sales representative for your application.
6. Solenoid Operated With Manual Lever B - Shim Adjustable Relief 500-1350 PSI Set at 1350
C - Shim Adjustable Relief 1351-1750 PSI Set at 1750
D - Shim Adjustable Relief 1751-2200 PSI Set at 2200
*See page V34 for coil details. E - Shim Adjustable Relief 2201-3000 PSI Set at 2500
pilot passage ways and internal 'B' WORK PORT 'A' WORK PORT
VALVES
or light load applications, a
restrictor installed in the work
port or line may be required.
CATV 17-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V17
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 13 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
Directional Control Valves
SECTIONAL BODY
VALVES
Model S V
STANDARD FEATURES
• 1-10 Sections Per Valve Bank • Differential Poppet Style Relief, Adjustable
• Load Checks On Each Section from 1500 to 3000 psi (Also available in Low Pressure
• Hard Chrome Plated Spools Version Adjustable from 500 to 1500 psi)
• Compact Construction • Power Beyond Capability
• Enhanced Metering Section Available in • Reversible Handle
both the High and Low Sections • Mid-Inlet and Lock Valve Section available
• Flow Control Inlet
SPECIFICATIONS
Parallel or Series Circuit Construction Foot Mounting
Pressure Rating Maximum Operating Temp............................180°F
Maximum Operating Pressure......... 3000 psi Weight Per Section
Maximum Tank Pressure................... 500 psi Inlet Section..................................... Approx 3.75 Ibs
Nominal Flow Rating ............................12 GPM Outlet Section................................. Approx 3.75 Ibs.
Refer to Pressure Drop Curves. Work Section (Standard)................ Approx 5.50 Ibs.
Filtration: For general purpose valves, fluid Work Section (High) . ..................... Approx 8.00 Ibs.
cleanliness should meet the ISO 4406 19/17/14
level. For extended life or for pilot operated valves,
the 18/16/13 fluid cleanliness level is recommended.
CATV 18-09-04-01
V18 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
ordering information:
The following is a listing of valve sections available from stock on a standard basis.
standard sections available:
INLET SECTIONS ALL HAVE BOTH TOP AND SIDE INLET PORTS
PART NO. RELIEF TYPE AND SETTING PORT SIZE
SVI21 No Relief #10 SAE ORB (7/8-14 THD)
SVI24 Adjustable Low Pressure Relief Set at 1000 PSI #10 SAE ORB (7/8-14 THD)
SVI15 Adjustable High Pressure Relief Set At 2000 PSI #8 SAE ORB (3/4-16 THD)
SVI25 Adjustable High Pressure Relief Set at 2000 PSI #10 SAE ORB (7/8-14 THD)
WORK SECTIONS ALL HAVE #8 SAE ORB (3/4-16 THD) PORTS, LOAD CHECK AND STANDARD LEVER HANDLE
PART NO. SPOOL TYPE AND ACTION
SVW1AA1 3-Way Single Acting w/ Spring Center
SVW1BA1 4-Way Double Acting w/ Spring Center (Work Ports Blocked in Neutral)
SVW1BB1 4-Way Double Acting w/ 3 Position Detent (Work Ports Blocked in Neutral)
SVW1CA1 4-Way Motor Spool w/ Spring Center (Work Ports Open to Tank in Neutral
SVW1CB1 4-Way Motor Spool w/ 3 Position Detent (Work Ports Open to Tank in Neutral)
SVW1DD1 4-Way 4 Position Float w/ Spring Center and Float Detent
SVL1CA1 4-Way Spool w/ Spring Center (with Pilot Operated Checks on Both Work Ports)
SVM1ES1 4-Way Meter Spool w/ Spring Center (Work Ports Blocked in Neutral)
PORT RELIEF WORK SECTIONS ALL HAVE #8 SAE ORB (3/4-16 THD) PORTS, LOAD CHECK AND STANDARD LEVER
HANDLE. MODELS WITH RELIEF FACTORY SET AT 2000 PSI AT 3 GPM.
PART NO. SPOOL TYPE AND ACTION PORT RELIEFS
SVH1BA1AA 4-Way Double Acting w/ Spring Center Port Relief Plugged
SVH1BA1GG 4-Way Double Acting w/ Spring Center Adjustable 1500-3000 PSI
SVH1DD1AA 4-Way 4 Position Float w/ Spring Center and Float Detent Port Relief Plugged
SVH1DD1BB 4-Way 4 Position Float w/ Spring Center and Float Detent Shim Adjustable 1500-3000 PSI
SVR1ES1AA 4-Way Meter Spool w/ Spring Center Port Relief Plugged
SVR1ES1GG 4-Way Meter Spool w/ Spring Center Adjustable 1500-3000 PSI
SVS1GA1GG 4-Way Double Acting Series w/ Spring Center Adjustable 1500-3000 PSI
SVS1GA1AA 4-Way Double Acting Series w/ Spring Center Port Relief Plugged
OUTLET SECTIONS ALL HAVE BOTH TOP AND SIDE OUTLET PORTS
PART NO. EXHAUST OPTIONS PORT SIZE
SVE11 Open Center Outlet w/ Conversion Plug #8 SAE ORB (3/4-16 THD)
VALVES
SVE21 Open Center Outlet w/ Conversion Plug #10 SAE ORB (7/8-14 THD)
SVE22 Power Beyond Outlet w/ #8 SAE Beyond Port #10 SAE ORB (7/8-14 THD)
SVE23 Closed Center Outlet #10 SAE ORB (7/8-14 THD)
SVE26 Open Center Outlet Pressure Build-up Valve #10 SAE ORB (7/8-14 THD)
SVE27 Power Beyond Pressure Build-up Valve #10 SAE ORB (7/8-14 THD)
TIE ROD KITS PART NO. PART NO.
TIE ROD TORQUE 660401001 1 Section* 660401006 6 Sections*
150in-lbs ± 6in-lbs 660401002 2 Sections* 660401007 7 Sections*
660401003 3 Sections* 660401008 8 Sections*
(12 1/2 ft-lbs ±1/2)
660401004 4 Sections* 660401009 9 Sections*
660401005 5 Sections* 660401010 10 Sections*
*Number of Work Sections
special INLET AND OUTLET sections available: Sections other than standard models listed can be
made to order. Use order code Matrix below to generate a model number that meets your requirements. If you prefer, contact your Sales
Representative with your specific requirements and a model number will be assigned for you. This model number can be used for future
orders. A minimum order quantity will apply to special valves. Please consult Sales Representative.
All inlet sections have All outlet sections have
INLET SECTIONS top and side inlets. OUTLET SECTION top and side outlets.
SVIXX-XXXX SVEXX
RELIEF SETTING (in PSI) EXHAUST OPTION
1. Std. Open Center Outlet
PORT SIZE PORT SIZE w/Conversion Plug
RELIEF OPTION 1. #8 SAE ORB (3/4-16 THD)
1. #8 SAE ORB (3/4-16 THD) 1. No Relief Plug 2. Power Beyond Outlet
2. #10 SAE ORB (7/8-14 THD) 4. Adj. Low Pressure 500-1500 PSI 2. #10 SAE ORB (7/8-14 THD) w/#8 SAE Beyond Port
5. Adj. High Pressure 1500-3000 PSI 3. Closed Center Outlet 0
6. Plastic Plug in relief cavity. 6 Open Center Outlet Pressure
Use only when cartridge is to be in- Build-up
stalled at a later date. 7. Power Beyond Pressure Build-up
#8 SAE Beyond Port
0
Often used with no relief. Review application
valve assemblies
The Model SV sectional body directional control valve can be ordered as separate sections or as a complete factory tested assembly. This will need
to be specified with each order. An assembly number will be assigned at the time of the order. This assembly number can then be used for future
orders.
performance curves
PRESSURE (PSI)
200 5 2500
150 4 2000
3
100 2 1500
1
VALVES
50 1000
2 4 6 8 10 12 14 16 2 4 6 8 10 12 14 16
FLOW GPM FLOW GPM
25 25
2 4 6 8 10 12 14 16 2 4 6 8 10 12 14 16
FLOW GPM FLOW GPM
100 200 1
75 3 150
50 1 100
25 50
4 6 8 10 12 14 16 4 6 8 10 12 14 16
FLOW GPM 120 SUS OIL AT 100˚F FLOW GPM
CATV 21-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V21
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
dimensional data
B WORK PORT work sections
A WORK PORT .25 TYP outlet cover
B WORK PORT
B WORK PORT A WORK PORT
A WORK PORT .25 .25
TYPTYP
A WORK PORT 1.50
B WORK PORT .25 TYP .75
1.501.50
1.09 .75 .75 1.50
PART NUMBER WILL 2.18 1.67 1.09 TOP OUTLET .75
1.091.09 CONVERSION PLUG
BE STAMPED IN THIS
1.091.09
PART
LOCATION
BE BE
NUMBER
TYPICAL
PART NUMBER
STAMPED
STAMPED
PART
WILL
WILL
IN THIS
IN THIS
NUMBER WILL
2.182.18 1.091.671.67
SPOOL
2.18 TRAVEL 1.67
SVW CONVERSION
PART NUMBER
WILL BE STAMPED
PLUG 1.94
PLUG
CONVERSION 1.09
TOPTOP
SIDE OUTLET
OUTLET
OUTLET
TOP OUTLET
CONVERSION PLUG
LOCATION
LOCATIONTYPICAL
TYPICAL
BE STAMPED IN THIS .250 TO WORK TYP.
SPOOL TRAVEL
.468 TO FLOAT TYP. TRAVEL
SPOOL SVW
SVW 1.44 PART NUMBER
IN THIS LOCATION
PART NUMBER 1.941.94 SIDE OUTLET
SIDE OUTLET
LOCATION TYPICAL
FLOAT OPTION
.250.250 SPOOL
TO TO
WORK TRAVEL
TYP.
WORK TYP. SVW .72
1.441.44
WILL BE BE
WILL
IN THIS
STAMPED
STAMPED
PART NUMBER
LOCATION
IN WILL
THIS LOCATION
BE STAMPED
1.94 SIDE OUTLET
FLOAT OPTION .250 TO WORK
FLOAT OPTION .468.468
TO TO
FLOAT TYP.
FLOAT TYP. TYP. 1.25 .72 .72 1.44 IN THIS LOCATION 3.25
FLOAT OPTION .468 TO FLOAT TYP. .72
SVEXX 2.00 3.253.25
2.91 1.251.25 3.25
1.25 SVEXX
SVEXX 2.00
2.00
2.912.91 SVEXX 2.00
1.55 2.91
1.551.55
1.50 5.34 1.75
1.55
1.501.50 5.345.34 1.751.75
inlet cover
1.50 1.63 1.88
5.34 SVH/SVR/ .721.44
1.75
1.631.63 1.881.88 SVH/SVR/
SVG SVH/SVR/ .721.441.44 1.50
1.63 1.88
SVGSVH/SVR/ .72 1.44 .75
SVG 3.00 .72 1.501.50
.75
SVG TOP INLET
.75
1.50
.75 1.09
SIDE INLET
.78
1.50 5.34 1.75 .78 .78
SPOOL TRAVEL .78
1.501.50 5.345.34 1.751.75
1.50
.281 TO WORK TYP.
5.34 SPOOL
SPOOLTRAVEL
TRAVEL 1.75 SVM/SVF Number of Work Sections “A” “B*”
2.50 1.50 TO WORK
.281.281 TOSPOOL
WORK TYP.
TRAVEL
TYP. SVM/SVF
SVM/SVF
1.44
1 2.875 5.875
1.22
2.502.50 .281
1.50 TO
1.50 WORK TYP. SVM/SVF
.72
1.441.44 2 4.312 7.312
2.50
1.221.22 1.50 .72 .72 1.44
1.22 1.40 3 5.750 8.750
.72
4 7.187 10.187
3.06 1.401.40 5 8.625 11.625
1.40
3.063.06 6 10.062 13.062
3.06 7 11.500 14.500
1.50 5.34 1.75 8 12.937 15.937
1.501.50 5.345.34 1.751.75 9 14.375 17.375
1.50 5.34 1.75 10 15.812 18.812
*With #10 plug in inlet & power beyond in outlet.
CATV 22-09-04-01
V22 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
typical stack dimensional data
12.50
7.44 12.50 5.58
7.44 5.58
2.00 SVEXX
2.00
2.00 SVEXX
2.00
C-590
C-590
9.30
2.60 9.30
1.95 2.60 1.75
1.95 8.59 1.75
8.59 POWER BEYOND PORT
POWER
3.71 BEYOND PORT
3.71
SIDE OUTLET
SIDE OUTLET
TOP OUTLET
TOP OUTLET
SVE
1.47
SVE
1.47
SVL
1.44 SVL
THE ROD TORQUE 1.44
SVH\SVS
150 in-lbs +6 in - lbs 1.44
SVH\SVS
(12 1/2 ft - lbs +1/2 1.44
SVM
SVM
SVW
SVW
-S12L
-S12L
-T12Q
1.47 -T12Q
1.47
SVI
SVI
VALVES
3.86
3.86
3.88
3.06 3.88
3.06
7.66
7.66
5.88
5.88
5.00
5.00
C-635 SVIXX
C-635 SVIXX
SVIXX SVIXX
SVIXX SVIXX
Handle option 11 (SVW & SVM) Handle option 12 (SVH, SVL, SVS & SVR)
Handle option 11 (SVW & SVM) Handle option 12 (SVH, SVL, SVS & SVR)
CATV 23-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V23
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
parallel circuit svw, svm, SVF, svh, svr, SVG and svl work sections
OPEN CENTER PASSAGE
Parallel circuit sections are by far the most common. The SVW, SVM, SVF, OPEN
OPENCENTER
CENTERPASSAGE
PASSAGE
SVH, SVR, SVG and SVL are all of parallel circuit construction. They can LOAD CHECK
LOAD
LOADCHECK
be combined together in any order in an assembly. When any one of the PARALLEL
CHECK CIRCUIT CORE
PARALLEL CIRCUIT CORE
spools is shifted, it blocks off the open center passage through the valve. B B PARALLEL CIRCUIT
B CORE
The oil then flows into the parallel circuit core making oil available to all BB BB BB
spools. If more than one spool is fully shifted, the oil will go to the spool with
the lowest pressure requirements. However, it is possible to meter the flow
to the spool with the lease load and provide flow to two unequal loads.
ENHANCED METERING SECTIONS P
The SVM, SVF, SVR and SVG sections have metering notches machined PP
into the spool to allow for better “feathering” of a load. The spool travel for
these sections is also a little longer at .281” vs. .250” for the standard
sections. In addition to the metering notches in the spool, the lands in the
SVF and SVG bodies have been machined to give more precise control A A A T
over the flow. The metering notches in the SVF and SVG have been AA AA AA TT
optimized for flows of 10 gpm or less. For enhanced metering on higher CONVERSION PLUG
flows, it is recommended that the SVM or SVR be used. CONVERSION
CONVERSIONPLUG
PLUG
LOCK SECTIONS
The SVL section combines both a 4-way directional valve and a double pilot operated check valve. This provides very
low leakage when the spool is in neutral. When the spool is shifted, oil is directed through a work port check to the
cylinder. Pressure on the work port applies pressure to the shuttle spool, opening the opposite check valve and allowing
oil to return into the valve. Depending on load pressures, the metering of the spool may be affected. In some cases a
one way restrictor in a work port may be beneficial.
230009009
230009009 4 WAY 3 POSITION
4 WAY 3 POSITION
670700034 OPTION B
670700034 OPTIONOPTION
670700033 B C
670700033 OPTION C TANK CORE A LOAD CHECK IS STANDARD ON EACH WORK SECTION
TANK CORE A LOAD CHECK IS STANDARD ON EACH WORK SECTION
PARALLEL POWER CORE
PARALLEL POWER CORE
SHUTTLE SPOOL LOCK VALVE
SHUTTLE SPOOL LOCK VALVE
SPOOL ATTACHMENT OPTION A CARTRIDGE
SPOOL ATTACHMENT OPTION A 660180001) CARTRIDGE
SPRING CENTER (KIT NO.
SPRING CENTER (KIT NO. 660180001)
671400033 OPTION C
671400033 OPTIONDOUBLE
C ACTING WORK
671400037 DOUBLEPORTS
ACTING WORK
OPEN IN NEUTRAL
671400037 PORTS OPEN IN NEUTRAL
671400036 SVL
671400036 SVL
671900010
671900010
4 WAY 3 POSITION
4 WAY 3MOTOR
POSITION
670300030 MOTOR
670300030
VALVES
170003008
170003008 OPEN CENTER CORES
670500044 OPEN CENTER CORES
670500044
POWER CORES LOAD CHECK
POWER CORES LOAD CHECK
ADJUSTABLE
ADJUSTABLE
DIRECT ACTING ANTI-CAVITATION
DIRECTRELIEF
ACTINGOPTION 'G' ANTI-CAVITATION
CHECK OPTION 'D'
RELIEF OPTION 'G' CHECK OPTION 'D' ADJUSTABLE HANDLE
SPOOL ATTACHMENT OPTION D ADJUSTABLE HANDLE
OPTION 4
SPOOL ATTACHMENT
SPRING CENTER OPTION D DETENT
W/FLOAT OPTION 4
SPRING(KIT
CENTER W/FLOAT DETENT
NO. 660180051)
(KIT NO. 660180051) 670700037
670700037
670500048
670500048
670100009
SVH SVH
670100009
230009009
230009009
670700036 OPTION D
670700036 OPTION4DWAY DOUBLE ACTING
170003027 4 WAY DOUBLE
WITH 4thACTING
POSITION FLOAT
170003027 WITH 4th POSITION FLOAT
670500043
670500043 670300032
670300032 670300031
670300031 671200007
671200007
SV WORK PORT RELIEF
SV WORK PORT RELIEFS, OPTION B, C, G, & PR - O -
PR - O -
H CAN BE ORDERED PRETESTED. USE
ORDER CODE AT RIGHT MODEL NUMBER
MODEL NUMBER
PORT SIZE
PORT SIZE
RELIEF TYPE
RELIEF TYPE
PRESSURE SETTING
PRESSURE SETTING
0 H- ADJUSTABLE SPECIFY RELIEF
0 CARTRIDGE H- ADJUSTABLE
1500-3000 PSI SPECIFY RELIEF
PRESSURE.
CARTRIDGEONLY 1500-3000 PSI PRESSURE.
LEAVE BLANK FOR
ONLY L- ADJUSTABLE LEAVE BLANK FOR
L- ADJUSTABLE STANDARD
500-1500 PSI STANDARD SETTINGS.
500-1500 PSI SETTINGS.
NH- NON-ADJUSTABLE
NH- NON-ADJUSTABLE STANDARD SETTING:
1500-3000 PSISTANDARD
1500-3000 PSI
NL- NON-ADJUSTABLE 2000SETTING:
PSI for H and NH
NL- NON-ADJUSTABLE 2000 PSI for HPSI
andfor
NHL and NL
500-1500 PSI 1000 PSI1000
for L and NL
500-1500 PSI
CATV 25-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V25
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
sv inlet relief options
OPTION 1 NO RELIEF
TOP INLET This option provides no built in relief. This is used when a relief is
TOP INLET
provided elsewhere in the system or in a closed center application.
This plug can be replaced with a relief cartridge at a later date.
SVIXX
OPTION 5 HIGH PRESSURE ADJUSTABLE
SVIXX RELIEF
This option provides for a differential poppet relief adjustable from
SIDE INLET 1500-3000 PSI. Set at 2000 PSI @ 10 GPM. The differential poppet
SIDE INLET
relief provides smooth quiet operation with high cracking pressure.
RELIEF CARTRIDGES
SVIXX CAN BE ORDERED PRETESTED SEE RV-OX RELIEF, PAGE V65.
in the field for power beyond or closed This option directs oil from open center core thru pressure
center applications. When spools are in build-up valve and then to tank. See solenoid section for
neutral the inlet is unloaded to tank. 1.38 description of operation.
1.00
1.00 OPTION 2 POWER BEYOND OUTLET 2.00 OPTION 7 POWER BEYOND PRESSURE BUILD-UP
WITH #8 SAE BEYOND PORT 2.00 VALVE FOR SOLENOID OPTION
This option provides for a high pressure This option directs oil from inlet thru pressure build-up valve
power beyond port. This would be used and then downstream. This pressure build-up valve provides
if a valve is to be added down stream. a #8 SAE power beyond port. The outlet must be connected
1.00 THE OUTLET PORT MUST STILL BE
2.00 to tank.
CONNECTED TO TANK. When spools
are in neutral the inlet is connected to
the power beyond port.
sv mid-inlet section
MID INLET PORT POWER CORE BLOCKING
MID INLET PORT POWER CORE BLOCKING
PLATE INSTALLS IN
MID INLET RELIEF PLATE
POWER INSTALLS INSVIM
CORE BETWEEN 1XX-XXXX
MID INLET RELIEF POWER CORE BETWEEN
MID INLET & UPSTREAM Last Four Digits Specify
MID INLET & UPSTREAM
SECTION.
SECTION. A Non-Standard Relief Pressure.
When blank, refer to standard setting
MID INLET PORT POWER CORE BLOCKING 1-No Relief
PLATE INSTALLS IN 2-SHIM Adjustable 500-1500 PSI Std. Setting 1000 PSI @ 10GPM
MID INLET RELIEF POWER CORE BETWEEN
MID INLET & UPSTREAM 3-SHIM Adjustable 1500-3000 PSI Std. Setting 2000 PSI @ 10 GPM
SECTION. 4-Adjustable 500-1500 PSI Std. Setting 1000 PSI @ 10 GPM
5-Adjustable 1500-3000 PSI Std. Setting 2000 PSI @ 10 GPM
C-Combined Flow Mid-Inlet
S-Split Flow Mid-Inlet (not available after a series section)
See Section View at left. Note
Location of Spacer, Part Number 671200035
SPACER
SPACER 1. Port Size #8 SAE ORB (3/4-16 THD)
SPLIT MID-INLET SHOWN CAN BE CONVERTED TO COMBINED DESCRIPTION:
SPLIT MID-INLET
MID-INLET SHOWNSPACER
BY MOVING CAN BETO
CONVERTED
OPPOSITE TO
ENDCOMBINED
MID-INLET BY MOVING SPACER TO OPPOSITE END A Mid-Inlet provides an inlet port for a second pump mid stream in the valve stack. A
relief can be provided in this section. With the combined flow the flow from both pumps is
SPACER available to the downstream sections when all the work sections upstream are in neutral.
The split flow completely separates the two pump flows. The common tank passage is all
SPLIT MID-INLET SHOWN CAN BE CONVERTED TO COMBINED that is shared between the two pump flows. Note: Split flow mid inlet is not available when
MID-INLET BY MOVING SPACER TO OPPOSITE END used after a series section and the core block plate is not used after a series section.
CATV 26-09-04-01
V26 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
sv flow control inlet section
SVIFXXXXXX The SVIF Flow Control Inlet is
interchangeable with the standard SV
PORT SIZE SOLENOID OPTION inlet section.
1- Side and End Inlet #10 SAE ORB Omit for Flow Control Option M
2- Side and End Inlet #10 SAE 12Q-12VDC Double Spade Coil FLOW CONTROL OPTIONS:
ORB, with #8 SAE ORB External 24Q-24VDC Double Spade Coil P OPTION incorporates a solenoid
EF Circuit 12H-12VDC DIN 43650 Coil operated, electrically variable pressure-
24H - 24VDC DIN 43650 Coil compensated flow control cartridge.
RELIEF VALVE With the solenoid de-energized, all
12L-12VDC Double Lead Wire Coil
1- No Relief of the inlet flow is diverted to the tank
24L - 24VDC Double Lead Wire Coil
2- Direct acting non-adjustable core/EF port. By increasing the current
12W -12VDC Double Lead Wire w/ Weatherpak
500-1500 psi set at 1000 psi* through the solenoid, the flow directed
Connector Coil
3- Direct acting non-adjustable to the power core and downstream
24W - 24VDC Double Lead Wire w/ Weatherpak
1500-3000 psi set at 2000 psi* sections will be proportionally
Connector Coil
4- Direct acting adjustable 500-1500 psi increased, (the maximum rating of
set at 1000 psi* FLOW CONTROL OPTION the cartridge is 16 gpm at 1500 mA)
5- Direct acting adjustable 1500-3000 psi M- Manual Flow Control Control current is normally provided
set at 2000 psi* P- Electro-Proportional via a controller card providing, a PWM
*for other settings please specify, i.e. U- Solenoid Unloading signal.
SVInlet
#10 Rear IF15P12Q-2700
Port #10 is setInlet
Rear at 2700
Port psi #10 Side Inlet Port #10 Side Inlet Port
U OPTION incorporates a solenoid
#10 Rear Inlet Port #10 Side Inlet Port operated, unloader cartridge. With the
solenoid de-energized, all of the inlet
IN IN flow is diverted to the tank core/EF
port. With the solenoid energized all
IN the inlet flow is directed to the power
core and downstream sections.
Option P- Proportional flow Option P- Proportional
M OPTION flow incorporates a manually
C-760 C-760
control with manual overridecontrol with manual
operatedoverride
pressure-compensated flow
EF SVIFXXX-XX EF SVIFXXX-XX Option P- Proportional flow control cartridge. With the control knob
C-760 control with manual
5.18override turned fully in (clockwise), all of the
5.18 inlet flow is diverted to the tank core/
EF SVIFXXX-XX
EF port. By turning the flow control
5.18
knob counter clockwise, the inlet
2.00 2.00 Optional #8 EF Port
Optional #8 EF Port flow directed to the power core and
VALVES
downstream sections is proportionally
2.00 Optional #8 EF Port increased. Approximately 5 revolutions
varies flow from no flow to full flow,
SOL Output
Power Input
RED+ BLACK-
SOL Output
Power Input
*With the power off, the inlet flow is directed to the tank (or excess flow
-Black -Black OFF
Power
OK
(4.63)
ON
Power Switch (4.63)
Prince Manufacturing
Corporation
Power
OK
0
0 1
port).
1
RED+ BLACK-
10
SOL Output
2
Power Input
10
2
(5.75)
9
3
*To provide power to the control, move the power switch to ON. (Green
-Black (4.63) (5.75)
9
3
Power
8
4
OK
+Red
8
4
5 7
+Red
0
(5.00)
2
*Minimum flow is directed into the valve when 0 on the dial is aligned with (5.00) (5.75)
9
3
8
4
the center mark. Maximum flow is directed into the valve when+Red 10 on the
5 7
6
SEE DETAIL
SEEOFFSET
DETAIL AT AT LEFT
LEFT
HANDLE SHOWN
SEE DETAIL AT LEFT
HANDLE LEFT 6th SPOOL INHANDLE
HANDLE BACKBACK 5th SPOOL
5th SPOOL OUT OUT
HANDLE RIGHT 6th SPOOL OUT
HANDLE BACK 5th SPOOL OUT
Please refer to these part numbers and state which sections the
handle is to be installed on when ordering a valve assembly. This
handle can be installed in the field to work sections with handle
option 3 (no handle).
JOYSTICK ASSEMBLY W/STRAIGHT HANDLE:
ASSEMBLED ON VALVE............................ SVJS
KIT..................................................... 660180017
VALVES
ONE WAY WORK PORT RESTRICTOR FOR ONE WAY WORK PORT RESTRICTOR FOR SVW WORK
SVH, SVM, SVR, & SVL WORK SECTIONS SECTIONS
This restrictor will restrict oil in one direction and This restrictor will restrict oil in one direction and allow free
allow free flow in the opposite direction. This flow in the opposite direction. This restrictor consists of the
restrictor consists of an orifice plate that simply orifice plate as described at left and an adapter fitting that
drops into the #8 SAE work port of a SVH, SVM, allow use in the standard SVW #8 SAE work port.
SVR, & SVL work section.
Restricted Free Restricted Free
Flow Flow Flow Flow
Restricted
Restricted Free Free Restricted
Restricted Free Free
Flow Flow Restricted Flow Flow Free Flow Flow Restricted Flow Flow Free
Flow Flow Flow Flow
SV SOLENOID OPERATED
Work Sections
• Type “-T” Solenoid Operated
• Type “-S” Solenoid and Manual Operation
VALVES
STANDARD FEATURES
SPECIFICATIONS
Parallel or Series Circuit Construction Foot Mounting
Pressure Rating Maximum Operating Temp.................180°F
Maximum Operating Pressure................ 3000 psi Weight Per Section
Maximum Tank Pressure.......................... 150 psi Inlet Section........................ Approx. 3.75 Ibs.
Nominal Flow Rating ............................12 GPM Outlet Section..................... Approx. 3.75 Ibs.
Differential Pressure Solenoid Operated
Required to Actuator . ............Approx. 150 PSI Type “-T” Work Section........Approx. 11.0 Ibs.
Filtration: For general purpose valves, fluid Type “-S” Work Section............. Approx. 14.5 Ibs.
cleanliness should meet the ISO 4406 19/17/14
level. For extended life or for pilot operated valves,
the 18/16/13 fluid cleanliness level is recommended.
CATV 29-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V29
O.E.M. CUSTOMER SERVICE: (712) 233-2181 • FAX (605) 235-1082 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
TYPE “-T” SOLENOID DESCRIPTION OF OPERATION
The Type “-T” Solenoid Operated SV Work Section allows remote electrical on-off control. This solenoid operated SV
section may be assembled with other standard SV manual sections, or type “-S” solenoid and manual sections.
The Type “-T” Solenoid Operated SV Section contains two 3-way 2-position solenoid cartridge valves, one at each
end of the main valve body. When both solenoids are de-energized, both ends of the control valve spool are open to
tank pressure and the spool remains spring centered. When solenoid “A” is energized, pilot pressure is applied to one
end of the control valve spool causing the spool to shift from neutral to full stroke on “A” work port. When solenoid “B”
is energized, pilot pressure is applied to the other end of the control valve spool causing the spool to shift to full stroke
on “B” work port.
Internal pilot lines provide pilot pressure to the solenoid actuators. Pilot pressure is generated by a “Pressure Build-Up
Valve” that is installed in the standard outlet section. Two versions of the pressure build-up valve are offered. The open
center pressure build-up valve and the power beyond pressure build-up valve. Both versions supply 150-200 PSI pilot
pressure to the solenoid actuators.
APPLICATION INFORMATION
For over center or light load applications if the required work port load pressure drops below 200 PSI, the pilot pressure
to the spool will drop to the same pressure causing the spring to move the control spool back towards the neutral position.
The spool will end up in an intermediate position between neutral and fully shifted. A restrictor installed in the work
port or line may be required for this type of application.
For closed center applications the Pressure Build-Up Valve is not required. However, a system pressure of 200 PSI
must be maintained in the closed center position to actuate the valve properly.
Proper operation of the solenoid actuators requires a pressure differential of 150-200 PSI above tank pressure. The
maximum tank port pressure should not exceed 150 PSI. Excessive tank pressure will increase “Seal Drag” and
may prohibit, the spool from shifting.
The solenoid operated SV section may be converted to accept an external hydraulic pilot supply to the solenoid actuators.
Please consult a Sales Representative for information.
SOLENOID OPERATED
SVH
WORK SECTIONS ALL HAVE #8 SAE PORTS AND LOAD CHECK. MODELS WITH RELIEF, FACTORY SET AT 2000 PSI AT 3 GPM
PART NO. SPOOL TYPE/VOLTAGE PORT RELIEFS
SVH1BAGG-T12Q 4 WAY-3 POSITION/12 VDC ADJUSTABLE 1500-3000 PSI
SVH1BAAA-T12Q 4 WAY-3 POSITION/12 VDC PORT RELIEF PLUGGED
SVH1CAGG-T12Q 4 WAY-3 POSITION MOTOR/12 VDC ADJUSTABLE 1500 - 3000 PSI
SPECIAL SECTIONS AVAILABLE: Sections other than the standard models listed can be made to order. Use the order
code Matrix below to generate a model number that meets your requirements. If you
prefer, contact your Sales Representative with your specific requirements and a model
number will be assigned for you. This model number can then be used for future
orders. A minimum order quantity will apply to special valves. Please contact your
Sales Representative.
SOLENOID OPERATED
PORT RELIEF WORK SECTION
SVH XXXXX—TXXX
SECTION TYPE COIL VOLTAGE & TERMINATION *
H-Port Relief Section 12Q, 12 VDC Double Spade
S-Series Section (Use G spool) 12L, 12 VDC Double Wire
12H, 12 VDC DIN 43650
VALVES
PORT SIZE 12W, 12 VDC Weather Pack ®
1. #8 SAE 24Q, 24 VDC Double Spade
24L, 24 VDC Double Wire
SPOOL TYPE 24H, 24 VDC DIN 43650
A-3-Way 3-Position 11C, 120 VAC Conduit
B-4-Way 3-Position 11H, 120 VAC DIN 43650
C-4-Way 3-Position Motor
G-4-Way Series
SPOOL ACTIONS SOLENOID OPERATION
A - Spring Center
SOLENOID OPERATED
SVW AND SVL WORK SECTIONS
SVWXXX—TXXX
SECTION TYPE
W-Standard Work Section
L-Lock Section (Use C Spool)
COIL VOLTAGE & TERMINATION *
12Q, 12 VDC Double Spade
12L, 12 VDC Double Wire
PORT SIZE 12H, 12 VDC DIN 43650
1. #8 SAE 12W, 12 VDC Weather Pack ®
24Q, 24 VDC Double Spade
SPOOL TYPE 24 L, 24 VDC Double Wire
A-3-Way 3-Position 24H, 24 VDC DIN 43650
B-4-Way 3-Position 11C, 120 VAC Conduit
C-4-Way 3-Position Motor
11H, 120 VAC Din 43650
SPOOL ACTIONS
A - Spring Center SOLENOID OPERATION
* See page V34 for coil details
CATV 31-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V31
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 15 & 16 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
ordering information: “-S” SOLENOID AND MANUAL WORK SECTIONS
The following is a listing of valve sections available from stock on a standard basis.
standard sections available:
SOLENOID
OPERATED SVW WORK SECTIONS ALL HAVE #8 SAE PORTS, LOAD CHECK AND STANDARD LEVER HANDLE
PART NO. SPOOL TYPE/VOLTAGE
SVW1AA1-S12Q 3 WAY-3 POSITION/12 VDC For Inlets, Outlets and
SVW1BA1-S12Q 4 WAY-3 POSITION/12 VDC Tie-rod Kits, please refer
SVW1CA1-S12Q 4 WAY-3 POSITION MOTOR/12 VDC to SV Section
SVW1BA1-S24Q 4 WAY-3 POSITION/24 VDC
SOLENOID OPERATED SVH WORK SECTIONS ALL HAVE #8 SAE PORTS, LOAD CHECK AND STANDARD LEVER HANDLE
MODELS WITH RELIEF, FACTORY SET AT 2000 PSI AT 3 GPM
PART NO. SPOOL TYPE/VOLTAGE PORT RELIEFS
SVH1BA1AA-S12Q 4 WAY DOUBLE ACTING/12 VDC PORT RELIEF PLUGGED
SVH1BA1AA-S24Q 4 WAY DOUBLE ACTING/24 VDC PORT RELIEF PLUGGED
SVH1BA1BB-S12Q 4 WAY DOUBLE ACTING/12 VDC SHIM ADJ. 1500-3000 PSI
SVH1BA1BB-S24Q 4 WAY DOUBLE ACTING/24 VDC SHIM ADJ. 1500-3000 PSI
SPECIAL SECTIONS AVAILABLE: Sections other than the standard models listed can be made to order. Use the order
code Matrix below to generate a model number that meets your requirements. If
you prefer, contact your Sales Representative with your specific requirements and
a model number will be assigned for you. This model number can then be used for
future orders. A minimum order quantity will apply to special valves. Please contact
your Sales Representative.
SOLENOID OPERATED
SVW AND SVL SECTION SVWXXXX–SXXX
SECTION TYPE
W-Standard Work Section COIL VOLTAGE & TERMINATION *
L-Lock Section (Use C Spool) 12Q, 12 VDC Double Spade
12L, 12 VDC Double Wire
PORT SIZE 12H, 12 VDC DIN 43650
1. #8 SAE
VALVES
5.89
5.89
C-635
C-635
3.50 5.344
3.50 5.344 1.44
12.34 1.44
12.34
A WORK PORT
B WORK PORT A WORK PORT
B WORK PORT
VALVES
TYPE “-T” SEAL KIT
660580014
LOAD CHECK
INTERNAL PILOT LINES SOLENOID CARTRIDGES
INTERNAL PILOT LINES
RESTRICTOR ORIFICE LOAD CHECK SEAL KIT
RESTRICTOR ORIFICE 660590008
NOTE: THIS OPTION CANNOT
BE ADDED IN THE FIELD.
NOTE: For additional data on inlet and outlet sections, valve assemblies, etc. Please refer SV information in this catalog.
SYMBOL
EXAMPLE TWO
SECTION STACK
SOL B SOL B
SOL B SOL B
B B
B B
A A
A A
SOL A SOL A
SOL A SOL A
NOTE: For additional dimensional data on inlet and outlet sections, valve assemblies, etc. please refer SV information in this catalog.
RECEIVING REQUEST.
NUMBER. ASSIGNED UPON
VALVE ASSEMBLY MODEL
P.O. BOX 7000 QUOTATION REQUEST FORM
N. SIOUX CITY, SD 57049-7000
PHONE (605) 235-1220
FAX (605) 235-1082 DATE_______________________________
SUBMITTED BY_ _____________________
CUSTOMER_ ________________________
ADDRESS___________________________
___________________________________
___________________________________
PHONE_____________________________
FAX________________________________
YEARLY REQUIREMENTS______________
CURRENT SUPPLIER_ ________________
FILL IN THE CHART BELOW USING ORDER CODE FROM SERIES 20 OR MODEL SV SECTION
NOTE ANY PORT RESTRICTORS, JOYSTICKS HANDLES, ETC. IN SPACE PROVIDED
ITEM SECTION NUMBER SECTION NOTES LIST
INLET
SECTION RELIEF: PSI @ GPM
WORK
SECTION 1 A RELIEF: PSI @ GPM B RELIEF: PSI @ GPM
WORK
SECTION 2 A RELIEF: PSI @ GPM B RELIEF: PSI @ GPM
VALVES
WORK
SECTION 3 A RELIEF: PSI @ GPM B RELIEF: PSI @ GPM
WORK
SECTION 4 A RELIEF: PSI @ GPM B RELIEF: PSI @ GPM
WORK
SECTION 5 A RELIEF: PSI @ GPM B RELIEF: PSI @ GPM
WORK
SECTION 6 A RELIEF: PSI @ GPM B RELIEF: PSI @ GPM
WORK
SECTION 7 A RELIEF: PSI @ GPM B RELIEF: PSI @ GPM
WORK
SECTION 8 A RELIEF: PSI @ GPM B RELIEF: PSI @ GPM
WORK
SECTION 9 A RELIEF: PSI @ GPM B RELIEF: PSI @ GPM
WORK
SECTION 10 A RELIEF: PSI @ GPM B RELIEF: PSI @ GPM
OUTLET
SECTION
TIE ROD KIT
SPECIAL INSTRUCTIONS ASSEMBLY CHARGE (SV ONLY)
TOTAL
CATV 35-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V35
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
MODEL RD5000
MONO-BLOCK
Directional Control Valves
1, 2, 3 Spool
Model RD5100
VALVES
Model RD5200
Model RD5300
CATV 36-09-04-01
V36 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
MODEL RD5000 DIMENSIONAL DATA
MODEL RD5100
OPTIONAL, TOP OR
BOTTOM PORTING 4.88
STD. OUTLET CAPACITY: 30 GPM
PORT LOCATION
(OUTLET PORT) 3.97 OR POWER MAX. PRESSURE: 3000 PSI
3.62 BEYOND OPTIONS WEIGHT: 14 LBS.
.406 DIA. (3) 1.83
.65 SPOOL TRAVEL STD. INLET
.313 EACH WAY FROM NEUTRAL PORT LOCATION
.85 .531 "IN" FOR FLOAT
FLOAT OPTION
BYD
OUT
8.50
1.56
HCI-PRINCE
5.00 3.00
B A 3.30
IN
1.28
2.20 6.10
OPTIONAL, TOP OR WORK PORTS A & B 1.50
BOTTOM PORTING 3.75 9.44
(INLET PORT) 12.63
1.56
D C
FLOAT OPTION
HCI-PRINCE
VALVES
8.50
7.25 5.25 2.25
B A 3.30
IN
1.28
2.20 6.10
OPTIONAL, TOP OR
BOTTOM PORTING 3.75 1.50 9.44
(INLET PORT) WORK PORTS A, B, C & D 12.63
1.56
STD. INLET
PORT LOCATION
2.25 F E
HCI-PRINCE
9.50 7.50
FLOAT OPTION
8.50
2.25 D C
B A 3.57
IN 1.28
2.20 6.10
OPTIONAL, TOP OR
BOTTOM PORTING 3.75 WORK PORTS A, B, C, 1.50 9.44
(INLET PORT) D, E & F 12.63
CATV 37-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V37
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
RD5000 ORDER CODE
MODEL RD5000 ORDER CODE MATRIX:
Fill each box with one letter or number from each column to generate a model number
Note that first all spools are listed then all spool attachments.
FIRST SPOOL
SECOND SPOOL
THIRD SPOOL
RD53
RD52
RD51
MODEL PORT SIZE SPOOL TYPE SPOOL ATTACHMENTS RELIEF VALVE INLET OUTLET POWER HANDLE
NUMBER LOCATION LOCATION BEYOND
RD51 2 A A 1 A 1 A 1
Single Spool 3/4 NPTF In/Out 3 Way, 3 Position 3 Position No Relief End END (with Not Provided With Complete
1/2 NPTF Work Open Center Spring Center to Neutral Power Beyond (only available with Handle Assembly
RD52 B 2 B Option A) outlet location 1)
Two Spool 3 3 Position Detent Differential Top 2
C Poppet
RD53 3/4 NPTF In/Out 4 Way, 3 Position (No Centering Spring) Less Handle
C Non-Adjustable 2 Only
Three Spool 3/4 NPTF Work Tandem Center
Set at 1000 PSI TOP B
Friction Detent Conversion
VALVES
*RD532CCCAAA5A4B1-25
The last two digits are Relief pressure in hundreds
Example: 25=2500 psi, all relief settings are at 10 GPM & 105°F.
*** Joystick handle will operate both spools using only one lever handle. The two spools can be operated either independently or simultaneously
depending on handle movement.
0
Often used with no relief. Review application.
CATV 38-09-04-01
V38 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 18 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
RD5000 PRESSURE DROP, RELIEF CURVE AND STANDARD FEATURES
STANDARD FEATURES
* Economical monoblock construction of high tensile * Differential poppet style relief, adjustable from 1500
strength gray cast iron. to 3000 psi (also available in low pressure version
* Load check on each spool, adjustable from 500 to 1500 psi)
* Hard chrome plated spool. * Power beyond and closed center capability.
* Optional 4 Position Float on 1st spool. * Reversible handle.
SPECIFICATIONS
PARALLEL CIRCUIT (RD-5200 & RD-5300)
MAXIMUM OPERATING PRESSURE............. 3000 PSI
MAXIMUM OPERATING TEMPERATURE........... 180°F
RD5100 SINGLE SPOOL VALVE MAXIMUM TANK PORT PRESSURE................ 500 PSI
PRESSURE DROP VALUES RECOMMENDED SYSTEM FILTRATION.....ISO 4406 19/17/14
110 SUS OIL AT 115°F FLOW RATING.....................................30 GPM RD5100
∆ P-PSI 25 GPM RD5200
FLOW INLET TO INLET TO A OR B 25 GPM RD5300
(GPM) OUTLET A OR B TO OUTLET WEIGHT................................................ 14 LBS RD5100
5 2 8 3
23 LBS RD5200
34 LBS RD5300
10 5 17 6 3000 RD5000 RELIEF VALVE
15 9 35 12 2500
110 SUS OIL AT 115°F
PRESSURE (PSI)
20 21 58 21
2000 3000
25 26 86 34
1500 2500
PRESSURE (PSI)
1000 2000
500 1500
RD5200 TWO SPOOL VALVE
VALVES
1000
PRESSURE DROP VALUES 0 5 10 15 20 25
FLOW (GPM) 500
110 SUS OIL AT 115°F
∆ P-PSI
0 5 10 15 20 25
FLOW INLET TO INLET TO A OR B C OR D TO
FLOW (GPM)
(GPM) OUTLET WORK PORTS TO OUTLET TO OUTLET
10 10 18 20 25 14 9 6
P
15 22 33 41 49 32 22 13
A C E T
20 37 56 68 78 51 36 21 CONVERSION PLUG
STANDARD VALVES AVAILABLE: All standard valves have end inlet and outlet locations, power beyond
conversion plug, complete handle assemblies, and adjustable differential poppet relief.
SPOOL TYPE
IN/OUT PORT
1st SPOOL 2nd SPOOL 3rd SPOOL SIZE WORK PORT SIZE
VALVE PART CONFIGURATION CONFIG. CONFIG.
NUMBER 3 POSITION
FLOAT 3 POSITION 3 POSITION 3 POSITION RELIEF
4 WAY 3/4 NPTF 1/2 NPTF 3/4 NPTF SETTING
SPOOL1 4 WAY2 4 WAY2 4 WAY2
DETENTED3
2000 PSI @
RD512GG5A4B1 X X X 10 GPM
2000 PSI @
RD512CA5A4B1 X X X 10 GPM
2000 PSI @
RD513GG5A4B1 X X X 10 GPM
2000 PSI @
RD513CA5A4B1 X X X 10 GPM
2000 PSI @
RD513CB5A4B1 X X X 10 GPM
2000 PSI @
RD522GCGA5A4B1 X X X X 10 GPM
2000 PSI @
RD522CCAA5A4B1 X X X X 10 GPM
2000 PSI @
RD532GCCGAA5A4B1 X X X X X 10 GPM
2000 PSI @
RD532CCCAAA5A4B1 X X X X X 10 GPM
VALVES
1. Four position, four way, tandem center, detented “in” the float position. Spring center to neutral from work positions.
Work ports blocked in neutral.
2. Tandem center. Spring center to neutral from work positions. Work ports blocked in neutral.
3. Tandem center, 3 position detent. Work ports blocked in neutral.
B B D
B D F
CATV 40-09-04-01
V40 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 18 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
RD-5000 SERIES STANDARD AND SPECIAL FEATURE DESCRIPTIONS
TWO SPOOL
12 STANDARD SPOOL ATTACHMENTS “JOYSTICK” HANDLE
CONVERSION PLUG ALLOWS This handle will operate both spools
ADDITION OF POWER BEYOND PORT using only one lever handle. The
12 STANDARDOUTLET
SPOOL ATTACHMENTS two spools can be operated either
CONVERSION PLUG ALLOWS
RETURN
independently or simultaneously
ADDITION OF POWER BEYOND PORTCORE. OIL FLOWS depending on handle movement.
AROUND SPOOL TO OUTLET
OUTLET
SPRING CENTER RETURN CORE.TANDEM CENTER SPOOL
OIL FLOWS
AROUND SPOOL TO OUTLET
4 STANDARD SPOOLS
VALVES
LOAD CHECK: OPEN CENTER APPLICATIONS:
The load check feature is standard on all The Standard RD-5000 Series Valves are open center type valves.
RD-5000 series valves. Each spool has a For open center valves the hydraulic oil is directed from the inlet to the
separate load check. The load check will outlet, or power beyond, through the open center passage when the
prevent the fall of a cylinder as the spool spools are in neutral. Moving one or more spools closes off the open
is shifted. It also prevents the back-flow of center passage and directs oil to the work ports.
oil from the work port to the inlet. As shown
below the pump must build up enough Open center systems most often contain fixed displacement pumps.
pressure to overcome the pressure on the The PMC hydraulic PTO pumps are fixed displacement gear pumps.
work port caused by the weight of the load The maximum pressure in an open center system is controlled by a
before the cylinder can move. relief valve. The RD-5000 series valves have a built in relief valve for
Please note that the load check has nothing this purpose.
to do with how well the valve will hold up a RD-5000 Series spool options A, C, E and G are all open center spools
cylinder with the LOAD
spool in neutral. The load when used with power beyond options A, B, C and F.
check is functional only when the spool is
shifted.
LOAD CLOSED CENTER APPLICATIONS:
CYLINDER RD-5000 Series Valves are available as closed center type valves. For
WORK PORT "A"
closed center valves the oil through the open center passage is blocked
WORK PORT "B" LOAD CHECK
POPPET
when the spools are in neutral.
CYLINDER SPOOL SHIFTED
FULLY "OUT"Closed center systems often use a variable displacement pressure
WORK PORT "A" compensated pump. When this type of pump is used in a closed center
LOAD CHECK
WORK PORT "B"
POPPET system the system pressure is controlled by the pressure compensator.
SPOOL SHIFTED
FULLY "OUT" When the spools of RD-5000 series valve are in neutral, system
pressure is maintained at the inlet of the valve. For this reason a relief is
normally not required or must be set at a higher pressure than the pump
OIL FROM PUMP compensator. RD-5000 Series spool options C, E and G are converted
to closed center by installing a closed center conversion plug, power
beyond option D.
OIL FROM PUMP PLEASE NOTE that this closed center option does not provide for the
The above drawing shows a section view thru work
drain off of standby spool leakage. This can allow a very small amount
ports of a RD-5100 Single Spool Valve.
of oil to enter the work ports when in neutral.
CATV 41-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V41
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
RD-5000 SERIES SPOOL OPTIONS
B B A
3 WAY 3 POSITION OPEN CENTER B 4 WAY 3 POSITION OPEN CENTER B A
OPTION A B B MOTOR SPOOL OPTION E B A B A
This spool option is used to control a single acting cylinder B This spool option can be used to control a bi-rotational B A
or a unidirectional motor. In neutral the work port is blocked motor or a double acting cylinder. In neutral the work
and oil goes through the open center passage to the next B ports are open to the return. This allows a cylinder B A
B B A
spool of a multi-spool valve or the power beyond of a single P-T to drift or a motor to coast to a stop. In neutral the oil P-T
spool valve. The “A” port is plugged for this option. P-T goes throughBthe open center passage to the next P-T
P-T LOAD CHECK
P-TCHECK B
spool of multi-spool valve or the power beyond of a P-T P-T B A
LOAD single spool B valve.
LOAD CHECK B A P-T B A
LOAD CHECKP-T B B A
4 WAY 3 POSITION TANDEM CENTER P-TBB AA LOAD 4 WAY 3 POSITION CLOSED CENTER P-T
B A B A
OPTION C P-T CHECK P-T
A BCHECK
BLOAD A MOTOR SPOOL B A
This spool option is used to control a double acting cylinder LOAD CHECK
This option isP-Tsimilar to spool option E except in
or a reversible motor. In neutral both of the work ports are BP-TA neutral the open center passage is blocked. This B A
blocked and oil goes through the open center passage to B A
LOAD CHECK BP-TA
function is achieved
P-T by using spool option E with
the next spool of a multi-spool valve or the power beyond of LOAD CHECK
B AP-Ta closed center conversion plug (Power beyond
P-T
P-T P-T
a single spool valve. This is the most popular spool option P-T option D). LOAD CHECK
and is used on most Prince standard valves. P-T LOAD CHECK B A P-TB AP-T B A
P-T P-T B A B A
B A B A P-T B A
B A
4 WAY 4 POSITION
B A OPEN CENTER
P-T B FLOAT
A SPOOL OPTION G P-T
B A B AP-T
4 WAY 3 POSITION CLOSED CENTER B AP-TB A P-T
This option is the same as spool option C, 4 way 3 position
B A
tandem center, with an added fourth “float” position. In B A
This spool option is similar to spool option C above except B A neutral the work P-T ports are blocked (this will hold up a P-T P-T
in neutral the open center passage is blocked. This function B
is achieved by using spool option C with a closed center B A P-T cylinder) and the oil goes through the open center passage P-T
B A to the next spool P-T or power beyond. In the float position the P-T P-T B A P-T
conversion plug (Power beyond option D). P-T P-Twork ports are B open
A to the return (this will allow a cylinder P-T B A
B
P-T to drift or “float”) and the oil goes to next spool or power
P-T P-T B A beyond. The float position is reached by pushing the spool P-T
B A P-T
P-T B as
A
far as it will go and Is held in place by a detent. This
option must be ordered with spool action option G. P-T
P-T
671400001 P-T DETENT RELEASE P-T
RD-5000 SERIES SPOOL ATTACHMENT OPTIONS
170003007
170003007 671400001 670500003
671400011
671400001670500003
P-T
DETENTPRESSURE
ADJUSTING
RELEASE
SCREW
PRESSURE
P-T
671400011
170003007 671400001
670500003
DETENT RELEASE
DETENT RELEASE
ADJUSTING SCREW
P-T
170003007 670500003 P-T PRESSURE
PRESSURE
3 POSITION SPRING CENTER TO 671400011
671400011 671400001 PRESSURE P-T RELEASE
ADJUSTING SCREWDETENT,
ADJUSTING SCREWDETENT RELEASE
170003007 670500003
NEUTRAL OPTION A 671400001
671400011 DETENT SPOOL ‘OUT
P-T DETENT ONLY, SPRING
PRESSURE
RELEASEADJUSTING SCREW
170003007
This option has 3 positions and a spring that returns 670500003 671400001 PRESSURE DETENT RELEASE
671400011 170003007 670500003 CENTER TO NEUTRAL ADJUSTING OPTION
SCREW EPRESSURE
the spool to neutral when the handle is released. 670300001 671400011 This option provides a pressure release
671400001 detentSCREW
for
VALVES
VALVES
END OUTLET
CORE END OUTLET
CENTER
(TO TANK)
CORE
power beyond port or installing CORE closed center plug 660312005.
CENTER
CORE (TO TANK)
OPEN OPEN
OPTION B CENTER CENTER BLOCKED
END OUTLET
CORE CORE (TO TANK)
This option is similar in function OPEN
CLOSED CENTER OPEN
CONVERSION
BLOCKED
CENTER
CENTER
to Option ‘A’ above except the CORE PLUG INSTALLED CORE
RETURN RETURN
conversion plug is installed in RETURN
CORE OPTION
CONVERSION D
END OUTLET BLOCKED RETURN
CORE
(TO TANK) CLOSED CENTER
the power beyond location and CORE
PLUG
This option converts an otherwise open
CORE
CONVERSION PLUG
END OUTLET
RETURN RETURN
the end outlet is relocated. This CORE CONVERSION
OPEN
(660312003)
center valve to closed center CORE operation. CLOSED
OPEN CENTER
(660312005)
(TO TANK)
PLUG
option should be used with the RETURN CENTER
(660312003)
CONVERSION The open center core is blockedRETURN CONVERSION
CENTER
by the CLOSED
(660312005)
PLUG
CORE CORE CENTER
open center spool options and CORE
PLUG
CORE
conversion plug. Oil cannot pass through the CONVERSION
BLOCKED PLUG
allows the valve to be converted to (660312003)
valve when the spools are in neutral. Closed
(660312005)
have power beyond function or be center systems are normally associated with
converted from open to closed center. This option is considered variable displacement pumps or any other RETURN
RETURN
the PMC Standard power beyond option because of the flexibility system
CONVERSION
PLUG where the pump flow is unloaded
CORE CORE CLOSED CENTER
it adds to the valve. when system pressure is reached.
(660312003)
CONVERSION PLUG
(660312005)
When all the valve spools are in neutral oil goes through open Note: If the closed center plug is installed in
center core to return core and then to outlet. a valve that has a relief it may be necessary to install the no relief plug or adjust
To convert a valve in the field to have power beyond, remove the relief pressure above the compensator setting.
the conversion plug and replace it with one of the power beyond Also, this closed center option does not provide for the drain off of standby spool
plugs listed. To convert valve to closed center, replace conversion leakage. This can allow a very small amount of oil to enter the work ports when
plug with closed center plug 660312005. in neutral.
connected to the base of the cylinder. The “A” and “D” ports are tied together and
connected to the rod end of the cylinder. The “C” port is plugged. At the beginning D C
of the cycle the cylinder is fully retracted. To begin the cycle both handles are pulled
back. Oil is directed to the “B” port and the cylinder will extend until it reaches the
end of its stroke. At this point the pressure will build to the detent release pressure
and the first spool will center to neutral. Now the oil will go through the open center
core to the second spool and is directed out the “D” port to retract the cylinder. When B A
the cylinder reaches the full retract position the pressure will build to the detent IN
release pressure and the second spool will center to neutral. This completes the
cycle. To begin the next cycle both handles are again manually pulled back. Please
note this valve does not have the loadcheck feature of the standard RD5200 valve.
OUT
BYD
CATV 43-09-04-01 D C
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com
D • E-MAIL:
C prince@princehyd.com
V43
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
B A
IN
OUT
BYD
B A
IN
B A D C
SOLENOID OPERATED RD5000 DIRECTIONAL CONTROL VALVE
SPECIFICATIONS
VALVES
The Solenoid Operated RD5000 Directional Control Valve allows remote electrical on-off or manual control. This
feature can be installed on the RD5100, RD5200, or RD5300. It can be installed on one or all spools of the RD5200 or
RD5300. This option can be purchased as kits and installed by customer. Complete valves are available special order
only (min. qty. 25) Consult your sales representative.
ITEM QTY PART NUMBER DESCRIPTION The Solenoid Operated RD5000 contains two, 3 way-2
1 1 660150030 BASE ACTUATOR KIT position solenoid cartridge valves and a pilot operated
2 2 SEE CHART SOLENOID COIL piston attached to the main control spool. When both
3 1 660150037 END MANIFOLD KIT solenoids are de-energized both sides of the pilot piston
4 1 660150033 MID SECTION MANIFOLD KIT are open to tank pressure and the spool remains spring
5 1 660150035 MANIFOLD TUBE KIT (SHORT) centered. When solenoid A is energized, pilot pressure
6 1 660150036 MANIFOLD TUBE KIT (LONG) is applied to one side of the pilot piston causing the
7 1 660150046 PRES. RED. MAN. KIT (MULTI-SPOOL) spool to shift from the neutral position to work port A.
8 1 660150047 PRES. RED. MAN. KIT (SINGLE-SPOOL) When solenoid “B” is energized, pilot pressure is applied
9 1 SEE CHART PRES. BUILD-UP CART.
to the other side of the pilot piston causing the spool to
shift to work port “B”. In cases where the pilot pressure
is provided by the inlet line or #4 SAE port on valve, a
DESCRIPTION PART NUMBER
“Pressure Build-Up Valve” must be installed in the outlet
PRES, BUILD-UP CART. OPEN CENTER 660312012
port. Two versions of the pressure build-up valve are
PRES. BUILD-UP POWER BEYOND CART (#12 SAE) 660312014 offered. The open center pressure build-up valve and
12 VDC LEAD WIRE COIL 671302003 the power beyond pressure build-up valve. Both ver-
12 VDC DOUBLE SPADE COIL
12 VDC WEATHER PACK
671322004
671302013
sions supply 150-200 PSI pilot pressure to the sole-
12 VDC DIN 43650 COIL 671302002 noid actuator. When remote pilot is used, the pressure
24 VDC LEAD WIRE COIL 671302007 build-up is not required. Because the valve is internally
24 VDC DOUBLE SPADE COIL 671322008 piloted, overcenter or light loads can be a problem. The
24 VDC DIN 43650 COIL 671302006
120 VAC CONDUIT COIL 671302009 inlet pressure must be at least 200 psi during operation.
120 VAC DIN 43650 COIL 671302010 Restrictors can be added to eliminate this problem.
CATV 44-09-04-01
V44 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
MODEL RD4100 SINGLE SPOOL MONO-BLOCK VALVE
RD4100 SPECIFICATIONS
MAXIMUM OPERATING PRESSURE.............................. 3000 PSI
MAXIMUM OPERATING TEMPERATURE............................ 180°F
STANDARD FEATURES
• Economical monoblock construction of high tensile strength gray
cast iron
• Load check
• Hard chrome plated spool
• Adjustable cartridge relief
• Open center, closed center, and power beyond available
• For use with system flows up to 15 gpm
• For use with system pressures up to 3000 PSI
• Optional top inlet & outlet port locations.
RD41
VALVES
B 3 Position Direct Acting Top Conversion Less Handle Only
4 Way 3 Position Detent Adjustable 2 Plug Installed
Tandem Center 500-1500 PSI Top 3
*RD412BA5A1A1-25 C Set at 1000 PSI W/Power Beyond C Less Complete
C Friction Options B, C & D Power Beyond Handle Assembly
THE LAST TWO DIGITS ARE 4 Way 3 Position Detent 5 Plug Installed
RELIEF PRESSURE IN Open Center Direct Acting with #8 SAE 5
HUNDREDS. EX: 25=2500 psi. Motor Spool D Adjustable Tang Spool End
ALL RELIEFS ARE SET AT 10 Float Detent 1500-3000 PSI D** Only
GPM & 105°F D Set at 2000 PSI Closed
4 Way 4 Position See SVW Center 6
** OFTEN USED WITH NO RELIEF. Tandem Center Section for For other Conversion Clevis Spool End
REVIEW APPLICATION. Float Spool Additional relief settings Plug Installed Only
Spool Actions please specify*
2000 PSI
RD412BA5A1A1 X X #10 SAE #8 SAE NO
AT 10 GPM
CATV 45-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V45
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 19 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
RD-4100 KITS, RELIEF CURVE, & PRESSURE DROP
5 3 10 3 1500
10 11 42 12
1000
15 26 85 32
0 2 4 6 8 10 12 14 16
GPM
SPRING CENTER
FLOAT DETENT
HIGH PRESSURE RELIEF CART.
POWER BEYOND CART. (#8 SAE)
VALVES
IN
2.48
3 POSITION
3.75 .56 DETENT
5.34
PART NUMBER DESCRIPTION
CATV 46-09-04-01
V46 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
MODEL LV
MONO-BLOCK
Directional Control Valves
Especially Suited for Front Loader Market
VALVES
LVT Parallel Circuit
Top Ported
STANDARD FEATURES
• Economical monoblock construction of high tensile strength gray cast iron
• Load check on each spool
• Hard chrome plated spools
• No face seals on spools
• Adjustable cartridge relief
• Power beyond available
• 4 Position Series Float Spool for loader boom
• 4 Position Regen Spool for loader bucket
• Molded rubber boot
• Patented dual spool lock joystick available
LVS
MODEL INLET & TANK PORT WORK PORT OPTION SPOOL & ACTION RELIEF OPTIONS POWER BEYOND HANDLE OPTIONS
NUMBER OPTION OPTIONS
LVS 1 A GR 1 A 1
Two spool Rear inlet & tank port A & C work ports on Standard No Relief Standard open center Joystick & boot w/ dual spool lock,
loader valve #8 SAE ORB top and B & D work A-B 4 way 4 position (field convertible to mounting feet down/to rear
4
Series circuit ports on rear, float, spring center #8 SAE ORB top
Direct acting
#6 SAE ORB with float detent power beyond) 2
adjustable
C-D 4 way 4 position Joystick & boot w/ dual spool lock,
500-1500 PSI set at
B selective regen, spring B mounting feet to the left
VALVES
1000 PSI
Work ports on top, #6 center with soft stop #8 SAE rear
SAE ORB 5 power beyond 3
GB Standard: Joystick & boot without spool lock,
C A-B 4 way 4 position Adjustable direct mounting feet down/to rear
*LVS1AGR5B1-25 Work ports on top, #8 float, spring center acting relief
THE LAST TWO DIGITS ARE THE SAE ORB with float detent 1500-3000 PSI 4
C-D 4 way 3 position (set at 2000 PSI) Joystick & boot without spool lock,
RELIEF SETTING IN HUNDREDS.
spring center mounting feet to the left
EX: 25=2500 PSI @ 10 GPM 6
Pilot relief Note: Not for use with
ALL RELIEFS ARE SET AT 10 GPM. GF closed center sytems 8
500-3000 PSI
A-B 4 way 4 position No joystick or handle (tang ends on
(set at 2000 PSI)
float, spring center spool only)
with float detent
*For other relief
C-D 4 way 3 position
settings please
(full time regen on specify (see
bucket rollout) spring example on the left)
center
BOOM
BUCKET
N
BUCKET BUCKET
10 64 100 60
LOWER
ROLLBACK TIP REGEN
RAPID TIP
N BOOM
BUCKET BUCKET BUCKET RAISE PART NUMBER DESCRIPTION
ROLLBACK TIP REGEN
BOOM
RAPID TIP
660590029 SEAL KIT
RAISE 660180170 SPRING CENTER FLOAT KIT
660180169 SPRING CENTER REGEN KIT
JOYSTICK HANDLE OPERATION JOYSTICK HANDLE OPERATION 671400252 ROD END
LOOKING AT HANDLE KNOB LOOKING AT HANDLE KNOB 660390016 ROD END W/STUD
REF HANDLE OPTION 1 REF HANDLE OPTION 2 671900084 SLIDING SPOOL STUD
660180154 SPOOL LOCK HARDWARE
CATV 48-09-04-01
V48 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 20 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
LVS SERIES LOADER VALVE DIMENSIONAL DATA
#8 SAE ORB REAR OUTLET PORT #8 SAE ORB TOP POWER BEYOND PORT OPTION A
(CONVERTIBLE TO STANDARD OPEN CENTER)
#8 SAE ORB REAR POWER BEYOND
1.94 PORT OPTION B 5.25
2.81 5/16-18UNC-2B
.75 2.54 1.16 2.94 (3)
.05
3.17
C
D
1.50 1.75 (5.53 REF)
1.75
4.84
A
1.44
(.66 REF)
WORK PORT OPTION A
REAR PORT LOCATION
.87
2.08 (.34 REF) 1.22 2.75
#8 SAE ORB REAR INLET PORT (1.80 REF)
(2.61 REF)
VALVES
REMOTE CABLE CONTROL
Heavy duty remote cable controls are available for most Prince directional control valves. The compact controller
bodies are of die-cast metal construction and are available in either dual axis or single axis configurations. Dual
axis joysticks are constructed with steel swivels and anti-wear bushings. The high strength flexible control cables
are jacketed and have quick attach connections.
Note: One control cable and one connection kit is required for
each spool controlled. Order the remote controller, the control
cables and the connection kits as necessary to complete the
remote cable control assembly.
CATV 49-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V49
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
MODEL LVT TWO SPOOL MONO-BLOCK LOADER VALVE
LVT SPECIFICATIONS
PARALLEL CIRCUIT
MAXIMUM OPERATING PRESSURE................................. 3000 PSI
MAXIMUM TANK PRESSURE............................................... 500 PSI
MAXIMUM OPERATING TEMPERATURE .............................. 180°F
RECOMMENDED SYSTEM FILTRATION............ISO 4406 19/17/14
FLOW RATING.......................................................................10 GPM
WEIGHT...............................................................................14.6 LBS
STANDARD FEATURES
• Economical monoblock construction of high
tensile strength gray cast iron
• Load check on each spool
• Hard chrome plated spool
• Adjustable cartridge relief
• Open center, and power beyond available 5/16-18 UNC MOUNTING HOLES ON BOTH TOP AND BOTTOM OF VALVE
• 4 Position Float Spool for loader boom
• 4 Position Regen Spool for loader bucket NOTE: NEUTRAL POSITION SPOOL LOCK AVAILABLE
LVT
MODEL PORT SIZE SPOOL & ACTION RELIEF VALVE IN/OUT POWER HANDLE
NUMBER PORT BEYOND
LVT 1 GR 1 A B 1
Top Ported Two #8 SAE In & Out Standard: No Relief Standard: Standard: Standard Handles
Spool Loader #6 SAE work ports A1-B1 4 Way 4 Position Float, 4 Top In, Out and Open Center 2
Valve Spring Center with Float Detent Direct Acting Power Beyond (Power Beyond Clevis Spool End Only
A2-B2 4 Way 4 Position Regen, Adjustable Port Plugged) 3
Spring Center with Soft Stop B Joystick for ports on bottom
500-1500 PSI
RG Side Inlet, Top Out & C (Use with GR, GB, BG or BB)
A1-B1 4 Way 4 Position Regen, Set at 1000 PSI
Power Beyond #8 SAE Power 4
Spring Center with Soft Stop 5
Joystick for ports on left (Use
Standard:
VALVES
** PLEASE NOTE that this closed center option does not provide for the drain off of standby spool leakage. This can allow a very small amount of
oil to enter the work ports when in neutral. Closed center option is often used with no relief. Review application.
CATV 50-09-04-01
V50 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 20 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
MODEL LVR TWO SPOOL MONO-BLOCK LOADER VALVE
LVR SPECIFICATIONS
PARALLEL CIRCUIT
MAXIMUM OPERATING PRESSURE.......................... 3000 PSI
MAXIMUM TANK PRESSURE........................................ 500 PSI
MAXIMUM OPERATING TEMPERATURE........................ 180°F
RECOMMENDED SYSTEM FILTRATION.....ISO 4406 19/17/14
FLOW RATING................................................................14 GPM
WEIGHT........................................................................ 22.6 LBS
STANDARD FEATURES
• Economical monoblock construction of
high tensile strength gray cast iron
• Load check on each spool
• Hard chrome plated spool
• Adjustable cartridge relief
• Open center, and power beyond available
5/16-18 UNC MOUNTING HOLES ON BOTH TOP AND BOTTOM OF VALVE • 4 Position Float Spool for loader boom
NOTE: NEUTRAL POSITION SPOOL LOCK AVAILABLE • 4 Position Regen Spool for loader bucket
LVR A
MODEL IN/OUT POWER
NUMBER PORT SIZE SPOOL & ACTION RELIEF VALVE PORT BEYOND HANDLE
LVR 1 GR 1 A B 1
Rear Ported Standard: Standard: A-B 4 Way 4 Position Float, No Relief All Ports On Standard: Open Center Standard Handles
Two Spool #10 SAE in/out Spring Center with Float Detent End of Valve (Power Beyond Port 2
Clevis Spool End Only
Loader Valve #8 SAE work ports C-D 4 Way 4 Position Regen, 4 Plugged) 3
Spring Center with Soft Stop Direct Acting Joystick for power
2 Adjustable C beyond on Right
#8 SAE in/out RG 500-1500 PSI #8 SAE Power Beyond (Use with GR, GB, BG or BB)
#6 SAE work ports A-B 4 Way 4 Position Regen, Set at 1000 PSI 4
Joystick for power
Spring Center with Soft Stop D ** beyond on Bottom
C-D 4 Way 4 Position Float, 5 Closed Center (Use with RG, BG or BB)
Spring Center with Float Detent Standard: Direct Acting 5
VALVES
Adjustable Note: Valve can be Joystick for power
beyond on Left
*LVR1GB5AB7-25 GB 1500-3000 PSI converted in the field.
(Use with RG, BG, GB or BB)
A-B 4 Way 4 Position Float, Set at 2000 PSI
6
THE LAST TWO DIGITS ARE THE Spring Center with Float Detent Joystick for power
RELIEF SETTING IN HUNDREDS. C-D 4 Way 3 Position Spring Centered 6 beyond on Top
EX: 25=2500 PSI @ 10 GPM Pilot Operated (Use with GR, GB or BB)
ALL RELIEFS ARE SET AT 10 GPM. BG Adjustable 7
A-B 4 Way 3 Position Spring Centered 500-3000 PSI Universal joystick contains
parts and instructions
C-D 4 Way 4 Position Float, Set at 2000 PSI for all mounting options
Spring Center with Float Detent 8
Tang Spool End Only
BB *For other relief settings
A-B 4 Way 3 Position please specify (see
Spring Centered example on the left) LVR PRESSURE DROP
C-D 4 Way 3 Position
Spring Centered
110 SUS OIL AT 115°F
(no float, no regen)
∆ P-PSI
FLOW INLET TO INLET TO A OR B
(GPM) OUTLET A OR B TO OUTLET
** PLEASE NOTE that this closed center option does not provide for the drain off of standby spool 4 4 14 4
leakage. This can allow a very small amount of oil to enter the work ports when in neutral. Closed
8 21 31 15
center option is often used with no relief. Review application.
14 64 72 46
CATV 51-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V51
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 21 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
13.95
13.95
MODEL LVT/VR MOUNTING DIMENSIONS9.32AND
9.32
OPERATIONS
3.64
1.06 3.64
4.13 1.06 .40
4.13 .40 9.06
.38 9.06
.38 13.95
A2
B2
A2
B2
1.44 9.32
1.81 1.44
.72 4.70
A1
1.81 3.64 .72 4.70
B1
A1
1.06 2.69
B1
4.13 .401.31 2.69
T
1.31 9.06
T
5/16-18UNC (6) 1.03
PB
.38
5/16-18UNC (6) PB 1.03
A2
POWER BEYOND INLET .63 OUTLET SPOOL TRAVEL: 4.89
B2
POWER BEYOND INLET .63
2.06 OUTLET.203SPOOL
TO WORK TRAVEL: 4.89
7.44
3.47 2.06 .437 TO FLOAT AND.203
REGEN 1.44
TO WORK
1.81 7.44
3.47 .437 TO FLOAT AND.72REGEN 4.70
A1
B1
2.69
1.3114.42
P
T
5/16-18UNC (6) 7.88 14.42 1.03
PB
2.53 7.88
3.66 POWER BEYOND
#10 OUTLET .63 2.53 3.66SPOOL TRAVEL: POWER BEYOND
POWER BEYOND INLET
#10 OUTLET OUTLET
.44 4.89
2.06 .44 .203 TO WORK 7.44
3.47 .437 TO FLOAT AND REGEN
C
3.20 14.42
3.20 7.88
D POWER BEYOND
2.53 3.66
D
HCI-PRINCE
4.58 1.44 1.55 #10 OUTLET
3.19 6.34
HCI-PRINCE
4.58 1.44 1.55 3.19 .44 6.34
B
#8 WORK PORTS
D
HCI-PRINCE
#10 INLET .95
4.58
1.56 1.55 3.19 5/16-18UNC (6) .203SPOOL
TO WORKTRAVEL: 6.34
3.25 1.56 5/16-18UNC (6) .396 TO.203 TO WORK
REGEN
B
3.25 .396TOTOFLOAT
.425 REGEN
1.57 1.77 .11 .425 TO FLOAT
.88
A
VALVES
Joystick Handle
The joystick handle will operate BOOM FLOAT
BOOM FLOAT
both spools using one lever
handle. The two spools can be
BOOM LOWER
operated independently or at BOOM LOWER
the same time depending upon
handle movement. Because we BOOM FLOAT
allow for maximum mounting N
N
flexibility, we have 4 options for BUCKET BUCKET BUCKET
BUCKET
ROLLBACK TIPBUCKETREGENBUCKET
the LVT, 2 options for the LVS ROLLBACK TIPBOOM REGEN
RAPIDLOWER
TIP
and 4 options for the LVR. The BOOM RAISE RAPID TIP
handle shift pattern for all is BOOM RAISE
1 2 3 4
1
ROLL BACK TIP 2 RAISE3 LOWER4 shown at right.
ROLL BACK TIP RAISE LOWER N
JOYSTICK HANDLE OPERATION
LOOKING BUCKET
AT HANDLE KNOBBUCKET BUCKET
ROLLBACK TIP REGEN
CATV 52-09-04-01RAPID TIP
V52 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
BOOM RAISE
1 2 3 4
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
ROLL BACK TIP RAISE LOWER
Directional Control Valves
LOG SPLITTER
CONTROL VALVE
VALVES
Model LS3000
SINGLE SPOOL
MONO-BLOCK 20GPM
Model RD2500
CATV 53-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V53
O.E.M. CUSTOMER SERVICE: (712) 233-2181 • FAX (605) 235-1082 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
MODEL LS3000 DIMENSIONAL DATA
On LS-3000 Models, pressure release detent is in the spool SPECIFICATIONS:
out position. 1. Max design and test pressure 2750 PSI
On LS-3060 Modesl, pressure release detent is in the spool 2. Max tank port pressure-150 PSI
in position. 3. Flow rating-25 GPM max.
OUTLET PORT 4. Relief valve setting-2250 PSI
4.62
5. This valve has one position pressure
.343 DIA. (3) 2.51
A & B WORK PORTS release detent with spring center to neutral.
OUTLET PORT 1.05
4.62 6. Weight: 10 lbs.
.343 DIA. (3) 2.51 7. Recommended filtration-ISO 4406 19/17/14
1.25 A & B WORK PORTS
1.05 .44 8. Max operation temp-180°F
9. In exposed environments do not mount
1.25 with spool vertical and handle end down. 8.25
OUT
2.93
3.25
IN
5.12
B
1.13
2.93
IN
12.31 9.19
4.12 7.80
12.31 9.19
• Tandem center spool (in neutral position, both work ports 6 660130007 COMPLETE PRESSURE RELEASE
blocked, pump unloaded to tank) DETENT KIT
• Ideal for log-splitter applications. Available with 3/4” 7 660530001 SEAL KIT (CONTAINS SEALS FOR
NPTF work ports for higher flow applications SPOOL AND DETENT)
OUT
2.13
1.50
4.88 A
B
1.06
.46
3.09 7.75 3.00 8.25
OUT
4.25
3.00
3.06
2.13
IN
1.06
3.09 7.75
12.00 9.06
.343 DIA. (3) A & B WORK PORTS INLET PORT
VALVES
OPEN TO CLOSED CENTER
OUTLET PORT CONVERSION This feature allows
OUT
2
NOTE: The Spool is
5 select fit to the valve
body at the factory
3/8 NPTF PIPE PLUG
PART NO. 200018002
and therefore body
and spool are not
6
available as repair
parts.
3 POSITION DETENT
CATV 55-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V55
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
LS-3000, RD-2500 PRESSURE DROP, RELIEF CURVE AND STANDARD MODELS
PRESSURE DROP LS-3000/RD-2500 RELIEF VALVE
CURVES AT VARIOUS SET POINTS
110 SUS OIL AT 115° ∆ P-PSI 110 SUS OIL AT 115°F
PRESSURE (PSI)
5 5 20 8 3 5 4 2000
LS-3000/RD-2500
LS-3000/RD-2500
LS-3000/RD-2500
RELIEF
RELIEF
VALVE
RELIEF
VALVE VALVE
10 9 39 15 5 11 13 CURVES
CURVES
AT CURVES
VARIOUS
AT VARIOUS
1500 AT
SETVARIOUS
SET
POINTS
POINTS
SET POINTS
110 SUS
110 SUS
OIL110
AT
OIL115°F
SUS
AT 115°F
OIL AT 115°F
15 19 60 32 7 23 24 1000
30003000 3000
20 31 90 54 11 40 42
500
25002500
8 12 16 20 2500 0 4
PRESSURE (PSI)
PRESSURE (PSI)
PRESSURE (PSI)
STANDARD VALVES AVAILABLE FLOW (GPM)
All standard valves have a load check (except LS3000 models), a complete lever handle 2000
assembly, and an adjustable ball-spring relief, see below
2000 2000
for settings. For other relief settings, please specify.
SPOOL TYPE SPOOL ACTION 15001500 1500
PRESSURE RELIEF CONVERTIBLE
VALVE PART SPRING 10001000 1000
RELEASE SETTING FROM OPEN
4 WAY WORK To Specify CENTER
NUMBER 4 WAY 3 WAY CENTER 3 POSITION DETENT IN/OUT
3 POSITION PORT Other Settings TO CLOSED
3 POSITION 3 POSITION TO DETENT SPRING PORT SIZE
MOTOR 500 500 500 SIZE See Next Page CENTER
NEUTRAL CENTER TO
0 0 4 408 8412 12816 161220 2016 20
NEUTRAL FLOW
FLOW
(GPM)
(GPM)
FLOW (GPM)
RD-2555-T4-ESA1 X X 1/2 NPTF 1/2 NPTF 1500 PSI @ NO
12 GPM
RD-2575-T4-ESA1 X X 3/4 NPTF 1/2 NPTF 1500 PSI @ YES
12 GPM
RD-2575-T4-EDA1 3/4 NPTF 1/2 NPTF 1500 PSI @ YES
X X
12 GPM
VALVES
1500 PSI @
RD-2575-T3-ESA1 X X
3/4 NPTF 1/2 NPTF YES
12 GPM
1500 PSI @
RD-2575-M4-ESA1 X X 3/4 NPTF 1/2 NPTF YES
12 GPM
RD-2508-T4-ESA1 X X #10 SAE #8 SAE 1500 PSI @ NO
12 GPM
RD-2575-M4-EDA1 X X 3/4 NPTF 1/2 NPTF 1500 PSI @ YES
12 GPM
LS-3000-1 X X 3/4 NPTF 1/2 NPTF 2250 PSI @ NO
3 GPM
2250 PSI @
LS-3000-2
X X 3/4 NPTF 3/4 NPTF 3 GPM NO
4 WAY SPOOL
B A 3 WAY SPOOL A 4 WAY MOTOR SPOOL
B A LOAD CHECK
This spool option is used to control This spool option is used to This spool option is used to control The load check feature is standard
a double acting cylinder. In neutral control a single acting cylinder a reversing motor or a double acting on all RD-2500 valve models.
both of the work ports are blocked or a uni-directional motor. In cylinder. In neutral the work ports are The load check will prevent the
and oil goes through P-T the open neutral the work port is blocked
P-T connected to tank and oil goes through P-T fall of a cylinder as the spool is
center passage to the outlet. This is and oil goes through the open the open center passage to the outlet. shifted. It does this by preventing
the most popular spool option. center passage to the outlet. This allows a motor to free-wheel or a the back-flow of oil from work port
The “B” work port is plugged for cylinder to float in the neutral position. to inlet. The pump must build up
this option. enough pressure to overcome
B AB A B A A A A B AB A B A the pressure on the work port and
lift the load check poppet. The
load check has nothing to do with
holding a cylinder when the spool
is in neutral.
P-T P-T P-T P-T P-T P-T P-T P-T P-T
CATV 56-09-04-01
V56 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 22 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
PRIMARY 7/8-14UNF-2A
SECONDARY
IN
SECONDARY
PRIORITY
PRIMARY
FLOW REGULATOR
7/8-14UNF-2A
IN
PRIMARY 7/8-14UNF-2A
PRIMARY 7/8-14UNF-2A
SECONDARY
IN SECONDARY
IN
.747 DIA. .685 DIA.
.745 .683
.747 DIA. .685 DIA. DESCRIPTION:
.745 .683 This valve is a screw-in cartridge style, pressure
.747 DIA. .685 DIA. compensated fixed-flow priority flow regulator. The
.747 DIA. .685 DIA.
.745
.745
.683
.683 valve delivers a constant flow to the priority port
2.062 .766 regardless of pressure on the secondary or primary
circuit. All ports can be fully pressurized.
2.062 .766
VALVES
FOR PRIORITY FLOW SETTINGS OR PORT SIZES NOT LISTED, PRIORITY FLOW
5.0CONTACT YOUR SALES REPRESENTATIVE.
GPM PRIORITY FLOW
IN SEC. REG. FLOW
FOR PRIORITY FLOW SETTINGS OR PORT SIZES NOT LISTED, CONTACT YOUR SALES REPRESENTATIVE. IN REG. FLOW
FOR PRIORITY FLOW SETTINGS OR PORT SIZES NOT LISTED, CONTACT YOUR SALES REPRESENTATIVE.
SEC.
SEC.
SEC.
IN
PRIORITY PMC CAVITY PMC10-3L
IN
.281 PRIORITY .75 PMC.810CAVITY PMC10-3L
DIA.
.281 .75 .814
IN
PRIORITY
PRIORITY PMC
PMCCAVITY
CAVITY PMC10-3L .810 DIA. #10 SAE PORT
PMC10-3L
.750
IN .281 .75 .752 DIA. .814 TAP 7/8-14UNF-2B
#10 SAE PORT
1.25 .281 .75 .810 DIA. .750
.688 DIA. .752 DIA.
.810 TAP 7/8-14UNF-2B
.814 DIA.
.690
1.25 .814 #10 SAE PORT .312 DIA. MAX
.750 .688 DIA.
#10 SAE PORT
2.50 .750
.752 DIA. .690 TAP 7/8-14UNF-2B
TAP 7/8-14UNF-2B.312 DIA. MAX
1.25 .752 DIA.
1.25 2.00
2.50 .688 DIA.
.688 DIA.
30° .690
.690 .312.63
DIA. MAX
.719MAX
.312 DIA.
2.00 .920
2.50 30°
2.50 .63 .719
.25 1.469 .920
2.00
2.00 1.810
.25 1.50 30° .63 .719
.920 1.469 30° .63 .719
2.88
1.50
.920 2.1251.810
.25 3.25 1.469 30°
.25 2.88 1.469 2.125
1.810
3.25
1.50 30° 1.810
1.50
SECONDARY2.88 2.125
2.88 2.125
3.25 30°
3.25
SECONDARY 30° 30°
.438 DIA. MAX
30°
.75 SECONDARY .438 DIA. MAX
SECONDARY
1.50 .75 30°
.438 DIA. MAX 30°
.438 DIA. MAX
1.50 .563 DIA.
.75
.75
1.50 .563 DIA.
1.50
.563 DIA.
.563 DIA.
CATV 57-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V57
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 24 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
PRESSURE COMPENSATED
ADJUSTABLE FLOW CONTROL VALVES
The PRINCE valve models RD-100 and RD-1900 are pressure compen-
MODEL RD-100 sated adjustable flow control valves. By rotating the handle, the flow out
TOP PORT FLOW CONTROL the “CF”, or controlled flow port, can be varied from approximately 0 to
the maximum controlled flow shown in the chart below. Any remaining
flow is bypassed to the “EF” or excess flow port. This flow can be used to
power another circuit or can be returned to tank. Once the controlled flow
is set it will remain nearly constant with variations in pressure on either
the controlled or excess flow ports.
Please note: If during operation the controlled flow port is blocked the
valve will compensate in such a way as to shut off flow to the excess port.
These valves can also be used as a restrictive flow control by plugging
the excess flow port.
MODEL RD-1900 The PRINCE valve models RDRS-100 and RDRS-1900 have a built in
SIDE PORT FLOW CONTROL adjustable pressure relief. For these models the excess flow port must
be connected to tank.
It should be noted that whenever these or any valve is used to bypass
or restrict, flow heat will be generated. Steps may be required to keep oil
temperature from becoming too high.
RDRS-150-16 RDRS-1950-16 1/2 NPTF 0-16 GPM These models have built in relief set at
1500 psi @ 10 gPM.
RDRS-175-30 RDRS-1975-30 3/4 NPTF 0-30 GPM
Special combinations of port size and controlled flow range are available in O E M quantities.
Please consult your sales representative.
SYMBOL CF EF CF EF
IN
RD-100 & IN RDRS-100 &
RD-1900 RDRS-1900
CATV 58-09-04-01
V58 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 23 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
MODEL RD-100 AND
CONTROL FLOW PORT RD-1900
EXCESS FLOW PORT
CONTROL FLOW PORT
PARTS BREAKDOWN ANDEXCESS DIMENSIONS
FLOW PORT
1.75 670400005 .38 3.88 670300008
1.75 670400005 .38 670300008
MODEL RD-100 .88 .88 3.88 2.05
.88 CONTROL FLOW.88PORT 2.05 EXCESS FLOW PORT
190100018 .265 DIA (2)
190100018 .265 DIA (2)
1.75 670400005 .38 1.00 1.00
240000912 3.88 670300008 PART NUMBER WILL BE
670400004
240000912 PART NUMBER
STAMPEDWILL BE LOCATION
IN THIS
.88
4.13 670400004 .88 2.05 STAMPED IN THIS LOCATION
4.13 190100018 .265 DIA (2)
230005093
230005093 1.00 2.38 PART NUMBER WILL BE
240000912
670400004 2.38 STAMPED IN THIS LOCATION
4.13 670400006 671600002
670400006 671600002 671800010
230005093 ROTARY SPOOL RDRS MODEL 671800010
ROTARY SPOOL 671500004
2.38 RELIEF VALVE PARTS 671500004671800002
220000762 1.18 671800002
2.88
2.88 670400006
220000762 1.18 670801001 671600002
3.34 2.31 670801001 671800010
3.34 ROTARY SPOOL 2.31 5.00
.13 240000116 5.00 671500004
.13 240000116 INLET 671800002
240016072 220000762 INLET MAIN SPOOL
2.88
240016072 1.18 670801001 MAIN SPOOL
2.31 ADJUSMENT
3.34 ADJUSMENT
5.00 670300011SCREWSCREW
.13 240000116 670300011
230009014
671900001
INLET 671900001
240016072 MAIN SPOOL 230009014
ADJUSMENT
670300011 SCREW
MODEL RD-1900 670300008 230009014
671900001
1.75 CONTROL FLOW PORT670300008 EXCESS FLOW
1.75 CONTROL FLOW PORT EXCESS FLOW
PORT
.88 .38
.88 670400005 3.88 PORT
670400005 .38 3.88
1.75 190100018 670300008
CONTROL FLOW PORT
190100018 EXCESS FLOW
.88 1.69 PORT .265 DIA (2)
670400005 .381.69 .88 3.88 .265 DIA (2)
.88
4.81 670400004 PART NUMBER WILL BE
4.81 190100018
670400004 PART NUMBER
STAMPEDWILL BE LOCATION
IN THIS
230005093 STAMPED IN THIS LOCATION
230005093 1.69
240000912 .265 DIA (2)
240000912 .88 2.16
2.16
4.81 670400004 670400006 PART NUMBER WILL BE
671600002
671600002
STAMPED IN THIS LOCATION
VALVES
230005093 670400006
ROTARY SPOOL
240000912
ROTARY SPOOL 2.16
2.88 1.18 671600002
2.88 3.34 670400006
220000762 1.18
220000762 2.31 670801001
.13 3.34 2.31 670801001
240000116
ROTARY SPOOL 5.00
.13 240000116 5.00
240016072 INLET MAIN SPOOL
2.88
240016072 1.18 INLET MAIN SPOOL
3.34 220000762 2.31 670801001
.13 240000116 APPLICATIONS: 5.00
As illustrated in 240016072
the circuit below the RD-100/RD-1900 INLET or returned to tank. Instead of the control flow directly
MAIN SPOOL
adjustable flow control valves can be used to control the supplying a motor it can be used as a adjustable priority
speed of a hydraulic motor. In this circuit oil from a source is divider and provide adjustable priority flow to a directional
directed into the inlet of the valve. By moving the handle the control valve bank. Also as illustrated the RD-100/RD-1900
flow can be varied from approximately zero when handle is can be used as a restrictive type flow control. In this circuit
vertical to maximum when the handle is horizontal. Oil not the excess flow port is blocked. This would normally be
going to the controlled flow port is bypassed to the excess used with a pressure compensated pump or in a closed
flow port where it can be used to supply another circuit center system.
MOTOR MOTOR
TO TANK OR SECONDARY CIRCUIT
TO TANK OR SECONDARY CIRCUIT
(INLET) (INLET)
CATV 59-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V59
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
CONSTANT VOLUME
PRIORITY DIVIDERS
MODEL RD-400 The PRINCE model RD-400 is a constant volume priority divider. It can
FIXED FLOW PRIORITY be used in applications where two circuits are to be supplied by a single
DIVIDER pump such as power steering systems. In operation the flow of oil supplied
to the inlet is divided into two flows, the priority flow and the excess flow.
The priority flow will remain nearly constant with variations in pressure on
either the priority or excess flow port and will also remain nearly constant
with variations in the inlet flow.
The priority flow GPM is determined by a fixed orifice inside the main
spool. The desired priority GPM must be specified with model number,
see below. The PRINCE model RD-400R provides the same function as
described above with the addition of a built in pressure relief for the priority
port only. This relief is internally adjustable and requires a separate line
to tank. The relief is factory set at 1500 PSI.
VALVE SPECIFICATIONS:
Capacity: 30 gpm max inlet flow Weight: RD-400 7 Ibs.
Pressure: 3000 psi max RD-400-R 7.5 Ibs.
MODEL RD-400 R
FIXED FLOW PRIORITY
DIVIDER WITH PRIORITY
PRESSURE RELIEF STANDARD MODELS AVAILABLE PRIORITY
gPM
PORT SIZE
1.5
VALVE INLET AND PRIORITY 2
MODEL NUMBER EXCESS PORT PORT 3
4
RD-400- ___ RD-400R- __ 3/4 NPTF 3/8 NPTF
VALVES
5
RD-405- ___ RD-405R- __ 3/4 NPTF 1/2 NPTF 6
RD-412- ___ RD-412R- __ #12 SAE #8 SAE 7
RD-450- ___ RD-450R- __ 1/2 NPTF 3/8 NPTF 8
RD-455- ___ RD-455R- __ 1/2 NPTF 1/2 NPTF 9
RD-477- ___ RD-477R- __ 3/4 NPTF 3/4 NPTF 10
12
To complete the model number fill in the blank with the 14
desired priority GPM from the list at right.
EX: RD-400-3 for 3 gPM priority flow; RD-405R-6 for 6 gPM
priority flow.
MODEL RD-500 The PRINCE model RD-500 is an adjustable constant volume priority
ADJUSTABLE FLOW divider. This valve provides the same function as the PRINCE model
PRIORITY DIVIDER RD-400 except the priority flow is adjustable from 2 GPM to 12 GPM.
The priority flow is set using the adjusting screw and is then locked in
place to maintain setting. This allows setting to be fine tuned in the field
to the exact flow needed.
VALVE SPECIFICATIONS
Capacity: 30 gpm max inlet flow
Pressure: 3000 psi max
Weight: 7 Ibs.
CATV 60-09-04-01
V60 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 23 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
MODEL RD-400, RD-400R AND RD-500
PARTS BREAKDOWN AND DIMENSIONS
RD-400 4.63
3.88 EXCESS FLOW
1.75 .38 PRIORITY FLOW
.88 2.05 .91 SYMBOL
.265 DIA (2)
CF EF
1.00
240000912
671600002
4.13
IN RD-400
VALVE BODY
INLET
670300008
SPOOL 2.31
ORIFICE PLUG SEAL KIT NO. 660504001
RD-400R
4.63
3.88
1.75 .38 PRIORITY FLOW EXCESS FLOW SYMBOL
.88 2.05 .91 CF EF
.265 DIA (2)
1.00
240000912
671600002
VALVES
4.13 ADJUSTMENT
SCREW T IN RD-400R
VALVE BODY
3/8 NPTF
INLET
TANK PORT
ALL MODELS 2.31
RD-500 4.63
3.88
1.75 .38 PRIORITY FLOW EXCESS FLOW
.88 2.05 .91 SYMBOL
.265 DIA (2) CF EF
1.00
240000912
671600002
4.13
ADJUSTMENT IN
RD-500
SCREW
VALVE BODY
INLET
2.31
660305001
PLUG
SPOOL SEAL KIT NO. 660505001
670300008
The PRINCE model RD-300 provides the same function as the RD-200 with the added
feature of free reverse checks. This allows the reverse flow of oil from the outlet ports
to the inlet port. The reverse flow is not pressure compensated.
VALVE SPECIFICATIONS:
Capacity: 30 gpm max inlet flow Weight: RD-200 7 Ibs.
MODEL RD-300 Pressure: 3000 psi max RD-300 7 Ibs.
PROPORTIONAL DIVIDER
WITH FREE RETURN CHECKS STANDARD MODELS AVAILABLE
DIVIDER INLET FLOW
MODEL NUMBER PORT SIZE
RATIO RANgE
MODEL RD-500P The PRINCE model RD-500P is a pressure compensated proportional flow divider
VALVES
PROPORTIONAL DIVIDER valve with one fixed and one adjustable orifice. This valve provides the same function
WITH ADJUSTABLE ORIFICE as the RD-200 except the divider ratio can be changed in the field.
VALVE SPECIFICATIONS:
Capacity: 30 gpm max inlet flow Weight: RD-500P 7 Ibs.
Pressure: 3000 psi max
STANDARD MODELS AVAILABLE
MODEL NUMBER PORT SIZE INLET FLOW RANgE
RD-537P-8 3/8 NPTF 4-8 GPM
RD-550P-16 1/2 NPTF 8-16 GPM
RD-575P-30 3/4 NPTF 16-30 GPM
The PRINCE valve model RD-1000S is an internally piloted adjustable sequence valve.
MODEL RD-1000S This valve will prevent the flow of oil from going to the sequence port until the pressure
INTERNALLY PILOTED on the inlet port reaches the sequence pressure. The sequence pressure is adjustable
SEQUENCE VALVE WITH within the range given in chart below. A built in check valve allows flow from sequence
EXTERNAL DRAIN port to inlet. To operate properly the drain port must be connected to tank. This
valve is a spool type sequence valve and will provide smooth operation but should not
be used in applications that require low leakage.
VALVE SPECIFICATIONS:
Capacity: 30 gpm max inlet flow Weight: 7 Ibs.
Pressure: 3000 psi max
To complete the model number fill in the blank with the spring letter that corresponds to desired counter
balance pressure range. EXAMPLE: RD-1050SM for 350-1700 psi spring range.
Standard settings are 300 psi, 1500 psi and 1500 psi for ranges L, M and H respectively.
CATV 62-09-04-01
V62 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 23 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
MODEL RD-200, RD-300, RD-300AB, RD-500P,
AND RD-1000S PARTS BREAKDOWN AND DIMENSIONS
RD-200 4.63
3.88 OUTLET
OUTLET
1.75
.88 .38 2.05 P (PSI)
.912
.265 DIA (2) 210
1.00 180 SYMBOL
240000912
-30
150
00
OUT OUT
0/3
120 6
0-1
20
671600002
/0 30
RD
90
-8
20
00
4.13 60 RD
0/3
20
30
RD
0
0 3 6 9 12 15 18 21 24 27 30
IN
FLOW (GPM) RD-200
VALVE BODY
DIVIDER SPOOL INLET
2.31 SEAL KIT NO. 660502001
VALVES
INLET VALVE BODY two outlet reaches 750 PSI. IN
DIVIDER SPOOL RD-300 &
SEAL KIT NO. 660503001 RD-300-AB
RD-500P
SYMBOL
240000912
OUT OUT
671600002
IN
RD-500P
660305001 INLET VALVE BODY
DIVIDER SPOOL SEAL KIT NO. 660505001
ADJUSTMENT SCREW
671800001
220000765
220001302
T
671000011 RD-1000S
VALVE BODY
SPOOL SECONDARY
INLET 660203001
METERING SPRING
SEAL KIT NO. 660510001
CATV 63-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V63
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
DIFFERENTIAL POPPET STYLE
RELIEF VALVES - RV AND DRV SERIES
MODEL RV
DIFFERENTIAL POPPET
The PRINCE valve model RV is a differential poppet type inline relief.
INLINE RELIEF The valve is made up of a relief cartridge and a cast iron valve body. The
differential poppet type relief provides smooth quiet performance with a
minimum variation between cracking and full flow pressures. This type
relief is also less sensitive to system contamination. The model RV is
well suited as a system relief up to 30 GPM and 3000 psi. It is available
in two pressure ranges and both an externally adjustable and shim
adjustable version.
VALVE SPECIFICATIONS:
Capacity: 30 gpm max inlet flow Weight: 3 Ibs.
Pressure: 3000 psi max
MODEL DRV
DIFFERENTIAL POPPET
DOUBLE RELIEF
The PRINCE valve model DRV is a differential poppet type double relief.
This valve uses the same relief cartridge as the model RV. The double
relief is used in systems that require cross over relief protection such a
reversible hydraulic motor, or systems that require a cushion valve such
as double acting cylinders.
VALVE SPECIFICATIONS:
VALVES
MODEL RV-O The PRINCE valve model RV-0 is the differential poppet relief cartridge
DIFFERENTIAL POPPET used in many valve models. It is available preset to install into RV valves in
RELIEF CARTRIDGE the field or into a custom application. This relief cartridge can also be used
in the RD5100, RD5200, RD5300 and SV stack valve inlet section.
VALVE SPECIFICATIONS:
Capacity: 30 gpm max inlet flow
Pressure: 3000 psi max
MODEL NUMBER MODEL NUMBER VALVE TYPE RELIEF SETTINg PORT SIZE
RV-1H DRV-1HH ADJUSTABLE 1500-3000 PSI 2000 PSI @ 10 GPM #12 SAE
RV-2H DRV-2HH ADJUSTABLE 1500-3000 PSI 2000 PSI @ 10 GPM 3/4” NPTF
RV-4H DRV-4HH ADJUSTABLE 1500-3000 PSI 2000 PSI @ 10 GPM 1/2” NPTF
RV-2L DRV-2LL ADJUSTABLE 500-1500 PSI 1000 PSI @ 10 GPM 3/4” NPTF
CATV 64-09-04-01
V64 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 23 & 24 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
MODEL RV AND DRV SPECIAL MODELS
RV AND MOUNTING DIMENSIONS
RV
RV
RVRV
MODEL NUMBER PORT SIZE RELIEF TYPE PRESSURE SETTING
SPECIAL MODEL RV RELIEF VALVES RV NUMBER
MODEL PORT SIZE RELIEF TYPE PRESSURE SETTING
Other relief valve models not listed on previous RV
MODEL NUMBER
RV
PORT 1 - #12
12-SIZE
SIZESAE H- Adjustable
RELIEF TYPE Specify
PRESSURERelief SETTING
Pressure in PSI.
MODEL NUMBER
MODEL NUMBER PORT PORT -#12
3/4 SAE
NPTF
SIZE RELIEF H-1500-3000
RELIEFAdjustable
TYPE
TYPEPSI Specify
PRESSURE
LeaveRelief
PRESSURE Pressure
SETTING
Blank in PSI.
for Standard
SETTING
page are available in OEM quantities. To select a RV 1 -2#12
3-SIZE
-3/4 NPTF
SAE
#10 SAE H-1500-3000
Adjustable
L-TYPE PSI
Adjustable Leave
Specify Blank
Relief for Standard
Pressure
Setting in PSI.
MODEL NUMBER PORT RELIEF PRESSURE SETTING
model number use the order code matrix shown RV RV 1 -2#12 - SAE
1-3-3/4-#10
4#12 SAE
SAE
NPTF
1/2 NPTF H- 1500-3000
Adjustable
H-L-Adjustable
Adjustable
PSIPSI
500-1500 Specify Relief
Specify Pressure
BlankSetting
LeaveRelief Pressure in PSI.
for Standardin PSI.
at right. Consult a sales representative if options RV 12 --3#12
3/4 -NPTF
2-4-#10-1/2
53/4
SAE NPTF
NPTF
SAE
#8 SAE 1500-3000
H- L-
NH- PSIPSI
500-1500
1500-3000
Adjustable
Adjustable PSI
Non-Adjustable Leave
Specify Blank
Leave Blank
Relief for Standard
Setting
Pressure
STANDARD for Standard
in PSI.
SETTING
other than those listed are required. 23 --43/4
#10
3-5-1/2SAE
-NPTF
#10#8NPTF
SAE L-NH-
Adjustable
Non-Adjustable
L- 1500-3000
Adjustable
500-1500
1500-3000 PSI PSI
PSI Setting
Leave STANDARD
Blank
2000 Setting forSETTING
for Standard
PSI H and NH
34 --5#10
1/2
4--#8 NPTF
O1/2
SAENPTF
-SAE
Cartridge L-500-1500
NH- 500-1500PSIPSI
1500-3000
Non-Adjustable
Adjustable
NL- PSI
Non-Adjustable 2000
STANDARD PSI
PSIfor
Setting
1000 forHLand
SETTINGandNH NL
45 -- 1/2
#8 SAE
5 O-Only.
- Cartridge
#8
NPTFSAE
No Body. NH-NH-
Non-Adjustable
NL- Non-Adjustable
Non-Adjustable
1500-3000
500-1500 PSIPSIPSI
500-1500 STANDARD
1000PSIPSI
STANDARD
2000 SETTING
for for L and
HSETTING
and NHNL
5 -O#8Only. SAENo Body.
- Cartridge 1500-3000
NH-NL- 1500-3000PSIPSI
500-1500 PSI
Non-Adjustable
Non-Adjustable 2000 PSIPSI
2000
1000
STANDARD for for
PSI H
forandLHand
SETTING NHNL
and NH
O -Only.
OCartridge
- Cartridge
No Body. NL-1500-3000
Non-Adjustable
NL- Non-Adjustable
500-1500 PSI
PSI 1000
2000 PSIPSI
1000
PSI for HLforand
for and NL NL
L and
NH
OOnly. No No
- Only. Body.
Cartridge Body. NL- 500-1500
500-1500PSIPSI
Non-Adjustable 1000 PSI for L and NL
Only. No Body. 500-1500 PSI
DRV XX XX
DRV XX XX
DRV XX XX
DRV
DRV XXXX XXXX
SPECIAL MODEL DRV RELIEF MODEL NUMBER PORT SIZE RELIEF TYPE RELIEF SETTINGS (PSI)
VALVES DRV
MODEL NUMBER PORT SIZE Port A/B #1 RELIEF TYPE Port C/D #2 XXRELIEF XXPort
Port A/BSETTINGS (PSI)
C/D
Port A/B #1RELIEF TYPE Port C/D #2 Port A/BSETTINGS Port (PSI)C/D
Other relief valve models not listed MODEL NUMBER
MODEL
DRV
NUMBER PORT
PORT SIZE
1 - #12 SAE H- Adjustable
Port A/B #1RELIEF TYPE
RELIEF TYPE PortH- Adjustable
C/D #2
RELIEF
Relief
RELIEF
Port Settings:
SETTINGS
A/B
RELIEF ThePort
SETTINGS two(PSI)
(PSI) digits
C/D
on previous page are available in MODEL NUMBER
DRV 12-SIZE
PORT 3/4SIZE
-#12 SAE
NPTF H-
PortPortAdjustable
1500-3000
A/BA/B
#1 #1 PSI H-
Port Adjustable
1500-3000
C/D #2 PSI Relief Settings:
represent
Port A/B The
the reliefPorttwo
settings
C/D digitsin 100s
RELIEF Port C/D #2 Port A/B Port C/D
MODEL NUMBER
DRV PORT 3-SIZE
1 -2#12 -3/4
SAENPTF L-1500-3000
Adjustable
H- Adjustable PSI TYPE H- Adjustable
L-1500-3000
AdjustablePSI RELIEF
represent
Relief SETTINGS
the The
Settings: relief
100two
(PSI)
settings
digits in 100s
OEM quantities. To select a model DRVDRV 1 -2#12
#10
- SAE
1-3-3/4
SAE
Port A/B
H- Adjustable #1 PSI
L-Adjustable
Adjustable
500-1500
H-1500-3000 PSI Port C/D #2 PSI
L-Adjustable
Adjustable
H- Adjustable
500-1500
H-1500-3000 PSI Relief
to the
Port A/B
nearest
Settings:
theThe two Port
PSI
C/D
digits
for the
-#10
4#12 SAE
SAE
NPTF
1/2 NPTF torespective
Reliefthe
represent nearest
Settings: 100
The
relief
ports. PSI
two
settings for
digits the
in 100s
number using the order code DRV 21 --3#12
3/4 NPTF
2-4-#10
-
3/41/2
5 SAE
- #8 NPTF
NPTF
SAESAE L- 500-1500
H-1500-3000
NH-
Adjustable
1500-3000
Adjustable
PSI
PSIPSI
Non-Adjustable L- 500-1500
H-1500-3000
NH-
Adjustable
1500-3000
Adjustable
PSI
PSIPSI
Non-Adjustablerepresent
Relief the the
respective
torepresent
the relief
nearest
Settings: settings
ports.
relief
100
The forinthe
settings
PSI
two digits 100s
in 100s
NH- Non-Adjustable NH- Non-Adjustable
matrix at right. Consult a sales 23 --43/4
#10
3-5-1/2SAE
-NPTF
#10#8NPTF
SAE L-1500-3000
Adjustable
1500-3000
L-500-1500
AdjustablePSI PSI
PSI
1500-3000
PSIPSIPSI
L-1500-3000
Adjustable
1500-3000
L-500-1500
AdjustablePSI PSI to the
PSI
1500-3000
nearest
to the
respective
PSIPSIPSI represent
100100
nearest
the ports.
EXAMPLE: relief PSI for
=PSI
settings
08 800the
forinPSI
the
100s
representative if options other 43 --5#10
1/2
4--#8 NPTF
1/2
SAENPTF
SAE L-500-1500
NL-
AdjustableNon-Adjustable
NH-500-1500
Non-Adjustable L-500-1500
NL- Non-Adjustable
NH-500-1500
Non-Adjustable
Adjustable respective
to EXAMPLE:
respective
the ports.
nearest 100 08
ports.PSI
17 ==800
for PSIPSI
the
1700
NH- NL- Non-Adjustable
Non-Adjustable
500-1500
1500-3000 PSI NH- NL- Non-Adjustable
Non-Adjustable
500-1500 PSI
45 -- 1/2
#8
5 - SAE
#8 SAE NH-
500-1500 PSI PSI
Non-Adjustable 1500-3000
NH-
500-1500 PSI PSI
Non-Adjustable
EXAMPLE: ports.0817 = 1700
= 800 PSIPSI
than those listed are required. 5 - #8 SAE
NPTF
NH-
500-1500
1500-3000
NL- 1500-3000
Non-Adjustable
PSI
PSIPSI
Non-Adjustable NH-
500-1500
1500-3000
NL- 1500-3000
Non-Adjustable
PSI
PSIPSI
Non-Adjustable respective
EXAMPLE:
EXAMPLE: 0817 =08800
==1700PSIPSI
800 PSI
NL- Non-Adjustable
500-1500
NL-
1500-3000 PSI
Non-Adjustable
PSI NL- Non-Adjustable
500-1500
NL-
1500-3000 PSI
Non-Adjustable
PSI
500-1500 PSIPSI 500-1500 PSIPSI EXAMPLE: 08 17 ==17800
1700
= 1700 PSIPSI
PSI
NL- 500-1500
Non-Adjustable NL- 500-1500
Non-Adjustable
500-1500 PSI 500-1500 PSI 17 = 1700 PSI
RV-SERIES MOUNTING0.28
DIMENSIONS
0.28 DIA. (2)
DIA. (2)
RV-SERIES RELIEF CURVES
1.50
VALVES
0.28 DIA. (2) 1.50 AT VARIOUS SET POINTS.
1.62 0.280.28
DIA.DIA.
(2) (2) AT VARIOUS SET POINTS.
1.62 1.25 1.50 110 SUSSET
AT VARIOUS OIL AT 115°F.
POINTS.
1.501.50 110 SUSSET
OILPOINTS.
AT 115°F.
PRESSURE
3.25
1.621.62 1.25 2.50 2.78 1.50 110 SUS OIL AT 115°F.
AT110
VARIOUS
SUS SET
OIL POINTS.
ATAT
115°F.
PRESSURE
3.25 1.251.25
2.50 2.78 110 SUS OIL 115°F.
PRESSURE
3.25 0.94
TANK PORT 2.50 2.78 3000
1.22 0.94
1.22 TANK PORT PRESSURE PORT (2) 3000 2500
3000
5.06 0.940.94 PRESSURE PORT (2) 2500
1.22 TANK
5.06 PORT 3000
0.94 PRESSURE PORT (2) 2500
(PSI)
1.221.22 TANKTANKPORT
PORT
5.06 PRESSURE PORT (2) (2) 2500 2000
(PSI)
5.06
(PSI)
2000
PRESSURE
RELIEF
FOR C/D CARTRIDGE
PASSAGE 1500
RELIEF CARTRIDGE FOR C/D PASSAGE
PRESSURE
RELIEF
FOR A/BCARTRIDGE
PASSAGE 0.343 DIA. (2) RELIEF CARTRIDGE 1500 1000
1500
FOR A/B PASSAGE 0.343 DIA. (2) RELIEF
FOR CARTRIDGE
C/D
RELIEF PASSAGE
CARTRIDGE 1000
RELIEF CARTRIDGE FOR C/DCARTRIDGE
PASSAGE 1500
FOR
RELIEF C/D PASSAGE 1000
DD
B B
RELIEF
FOR CARTRIDGE
A/B
RELIEF PASSAGE
CARTRIDGE 0.343 DIA. (2)
FOR A/BCARTRIDGE
FOR PASSAGE
A/B 0.343 DIA.DIA.
0.343 (2) (2) FOR C/D PASSAGE 1000500
1000
RELIEF 4.50PASSAGE 1000
500
D D
B B
FOR A/B4.50
PASSAGE 0.343 DIA. (2) 500
D D
B B
4.50 500500
4.504.50 3.50 0 5 10 15 20 25
3.50 500 0 5 10
FLOW 15
(GPM) 20 25
4.50 3.50 0 5 FLOW (GPM)
10 15 20 25
2.88 3.503.50 0 0 5 5 10 15 15 20 20 25 25
10 (GPM)
FLOW
2.88 1.63 FLOW (GPM)
2.88
3.50 1.63 MACHINING DIMENSIONS
0 5 10FLOW (GPM) 20
15
NO. 10 SAE PORT
25
0.50
CC
A A
A A
A A
TANK CAVITY
1.13 2.00 3.447.00 TANK CAVITY
7/8-14
NO. 10UNF-2B
7/8-14 UNF-2B
SAE X .625
PORT DEEP
X .625 DEEP
1.131.13 7.00
3.443.44 0.50
2.00
FIELD CONVERSION KITS: TANK CAVITY 7/8-14 UNF-2B X .625 DEEP
2.002.00
1.13 7.00
3.44
660250002 ADJ. RELIEF CARTRIDGE 1500-3000
7.007.00 PSI RV ONLY TANK CAVITY
TANK CAVITY 1.280 1.637
2.00 ADJ. RELIEF CARTRIDGE 500-1500 PSI*
660250003 TANK CAVITY
1.13 DIA 1.280 1.637
7.00 1.13 DIA 1.637
660250004 NON-ADJUSTABLE RELIEF CARTRIDGE 1500-3000 PSI RV ONLY 1.280 1.637
660250005 NON-ADJUSTABLE RELIEF CARTRIDGE 500-1500 PSI*
1.13 DIA 1.280 1.637
1.280
1.131.13
DIADIA
660250011 ADJ. RELIEF CARTRIDGE 1500-3000 PSI DRV ONLY 1.280 1.637
1.13 DIA
660250012 NON-ADJUSTABLE RELIEF CARTRIDGE 1500-3000 DRV ONLY 30° PRESSURE
660590001 RV SEAL KIT 30° PRESSURE
.687 DIA.
660590004 DRV SEAL KIT 30° .690 PRESSURE
.687 DIA.
670300005 1500-3000 PSI RELIEF SPRING 30°30° .690PRESSURE
.687 PRESSURE
.687 DIA.
670300006 500-1500 PSI RELIEF SPRING 30° .690 PRESSURE
.687DIA.
.690.690 DIA.
.687 DIA.
* NOTE: THESE CARTRIDGES ARE THE SAME ON BOTH RV AND DRV VALVES .690
CATV 65-09-04-01
PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
V65
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
MODEL RD-1800 PRESSURE RELIEF
RELIEF VALVEMODEL
CURVE RD-900 SELECTOR VALVE
RELIEF VALVE CURVE
AT VARIOUS SET POINTS
AT VARIOUS SET POINTS
110 SUS OIL AT 115°F.
RELIEF
MODEL VALVE CURVE
110 SUS OIL AT 115°F.
RD-1800 The PRINCE valve model RD-1800 is a direct acting ball/spring type pressure
AT VARIOUS SET POINTS 2000 relief. The valve is compact and simple in design. This type relief is fast
110 SUS BALL/SPRING TYPE
2000OIL AT 115°F.
opening and is well suited for pressure spike protection. The performance
1800
2000 1800 DIRECT ACTING RELIEF curves below indicate the low cracking pressure typical to ball/spring reliefs.P
RD-1800
RELIEF VALVE 1600
CURVE
1800 1600AT VARIOUS SET POINTS Please refer to the model RV relief for a system pressure relief.P The valve is
RD-1800
1400
110 SUS OIL AT 115°F.
1400 available with a standard steel seat, model RD-1800S, RD-1800 P or with a hardened
1600
1200 seat, model RD-1800H. Both models are externally adjustable.
PRESSURE (PSI)
2000
1200
PRESSURE (PSI)
1400
1800 1000 SYMBOL
1200 1000 VALVE SPECIFICATIONS:
PRESSURE (PSI)
RD-1800 P
1600800 800 Capacity: 20 gpm max inlet flow
1000
1400600 600 Pressure: 2500 psi max
800
400
Weight: 2 Ib. T
T
1200400 Adjustment Range: 1000 PSI to 2500 PSI
PRESSURE (PSI)
FLOW (GPM)
4.56
1000 .69 PRESSURE PORT (2)
TANK
800 1.50
1.50 TANK
600
TANK
1.50 4.56
.69 RD-1800HPRESSURE PORT (2) T
400 RD-1800H 2.13
RD-1800S2.13 671500004
200 RD-1800S
RD-1800H 671500004 671800002
2.13 671800002
TANK
VALVES
The PRINCE valve model SS is a manual 3-way 2 position selector valve. This
MODEL SS SELECTOR valve will allow one pump source to supply two circuits. With the standard selector
spool pulling the spool out diverts oil to port nearest handle, pushing the spool
in diverts oil to the port away from the handle. The valve has an inlet on both the
bottom and front of the valve body. Special options include lever handle and a
float spool. The float spool connects the inlet to both outlets when the spool is
pushed in and block both outlets when spool is pulled out.
VALVE SPECIFICATIONS: kITS:
Capacity: 20 gpm max inlet flow END CAP KIT 660170009
LEVER HANDLE KIT 660170007
Pressure: 2500 psi max
SEAL KIT 660590006
Weight: 4 lbs. KNOB PART NO. 670400031
SNAPPING PART NO. 230017021
CLEVIS PART NO. 671900011
SS SELECTOR SPOOL SPRING OFFSET 660170008
SYMBOL
SS SELECTOR SPOOL STANDARD MODELS AVAILABLE
SS
MODEL NUMBER PORT SIZE DESCRIPTION
SS
1/2 NPTF SELECTOR WITH KNOB
SS FLOAT SPOOL SS-2A1D MODEL PORT SIZE SPOOL SPOOLHANDLE
ATTACHMENTS HANDLE
SS-3A1D #8 SAE SELECTOR WITH KNOB HANDLE
SS FLOAT SPOOL SS-2A1A 1/2SS
MODEL NPTFPORT 1-3/8
SIZENPTF SELECTOR
SPOOL A WITHOUT ATTACHMENTS
1-NONE
SPOOL ATTACHMENTS (standard) A-NONE
HANDLE
SS-2A1E 1/2 NPTF 2-1/2 NPTF SELECTOR SELECTORWITH LEVER 2-END CAP ONLY
HANDLE B-CLEVIS ONLY
SS SELECTOR SPOOL (standard) 3-SPRING OFFSET A-NONE C-CLEVIS W/
SS SELECTOR SPOOL SS-2A1B SS1/2 NPTF (standard)SELECTOR
1-3/8 NPTF A WITH 1-NONE
CLEVIS (standard)
SPOOL OUT PINS AND LINK
2-1/2 NPTF SELECTOR 2-END CAP ONLY B-CLEVIS ONLY
3-#8 SAE (standard) B D-KNOB
C-CLEVIS W/
(standard) FLOAT 3-SPRING OFFSET (standard)
SS 4-#10 SAE SPOOL OUT PINSE-LEVER
AND LINK
SS 3-#8 SAE B D-KNOB
HANDLE
VALVES
SS FLOAT SPOOL MODEL PORT SIZE SPOOL SPOOL ATTACHMENTS HANDLE
SPECIAL MODEL SS SELECTOR VALVES SS 1-3/8 NPTF A 1-NONE (standard) A-NONE
SS 2-1/2 NPTF
1-3/8 NPTF SELECTORA 2-END1-NONE (standard) B-CLEVIS
A-NONE
ONLY
Other selector valves not listed as standard above SELECTOR 3-SPRING
CAP ONLY
2-END CAP ONLY C-CLEVIS B-CLEVIS
W/ ONLY
2-1/2 NPTF (standard) OFFSET
are available in OEM quantities. To select a model (standard) (standard) OUT OFFSET PINSC-CLEVIS
3-SPRING
SPOOL AND LINKW/
(standard)
number use the order code matrix at right. Consult a 3-#8 SAE B SPOOL OUT D-KNOB PINS AND LINK
sales representative if options other than those listed 3-#8
4-#10 SAE SAE FLOAT B D-KNOB
(standard)
are required. 4-#10 SAE FLOAT E-LEVER(standard)
HANDLE
E-LEVER HANDLE
DS
VALVES
INLET PORTS
A E
SYMBOL
2.13
C D
SELECTOR SPOOL
BAFE
4.25 3.25
.406 DIA.
(2) CD CIRCUIT SELECTOR
B F
CYLINDER #2 PORTS
2.75
5.50
1.13
CIRCUIT SELECTOR SERIES/PARALLEL
CATV 68-09-04-01
V68 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181
SEE PAGE 23 & 24 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING
PILOT-OPERATED CHECk VALVES
MODEL RD-1400 The PRINCE valve model RD-1400 is a double pilot-operated lock valve.
LOCK VALVE DOUBLE This valve will lock a cylinder in place when a directional control valve is
in the neutral position. In operation oil is directed to one of the valve ports
PILOT-OPERATED and oil can free flow to the corresponding cylinder port. The pressure on
this valve port will shift the pilot spool opening the opposite check valve.
This will allow oil to return through the opposite check valve. This valve has
a hardened steel seat and steel ball and therefore should not be used in
applications requiring absolutely zero leakage. When using a pilot operated
check to lower a heavy load the valve may chatter. An orifice in the line in
some cases may be beneficial.
5.88 CYLINDER
3.50 PORTS
1.81
TO
CYLINDER
3.11
2.00
660214001
VALVES
MODEL NUMBER PORT SIZE
Capacity: 30 gpm max inlet flow
Pressure: 3000 psi max
RD-1450 1/2 NPTF
Weight: 7 lbs.
RD-1475 3/4 NPTF
Pilot Ratio: 4:1
MODEL RD-1600 The PRINCE valve model RD-1600 is a pilot operated check valve. This valve
PILOT OPERATED blocks oil from flowing from the cylinder port to the valve port until sufficient
CHECK VALVE pressure is applied to the pilot port. Oil can free flow from the valve port to
the cylinder port. The valve has a two stage poppet allowing smooth chatter
free operation.
5.81
240000016 240000018 670300012
PILOT PORT 240019016 240019018
670200004
CYLINDER
PORT
CYLINDER
2.50
1.31
GPM PSI PSI PSI PSI PSI PSI PSI PSI PSI PSI PSI PSI PSI PSI
HYDRAULIC CYLINDER 100 200 250 300 400 500 750 1000 1250 1500 2000 2500 3000 4000
FORCE (lbs.) 0.5
1.0
0.03
0.06
0.06 0.08
0.13 0.16
0.10
0.19
0.13
0.26
0.16
0.32
0.24
0.49
0.32
0.65
0.41
0.81
0.49
0.97
0.65
1.30
0.81
1.62
0.97
1.94
1.30
2.59
force (lbs) = cylinder area (sq. in.) x pressure (psi) 1.5 0.10 0.19 0.24 0.29 0.39 0.49 0.73 0.97 1.22 1.46 1.94 2.43 2.92 3.89
To determine force developed by a cylinder in 2.0 0.13 0.26 0.32 0.39 0.52 0.65 0.97 1.30 1.62 1.94 2.59 3.24 3.89 5.19
VALVES
2.5 0.16 0.32 0.41 0.49 0.65 0.81 1.22 1.62 1.03 2.43 3.24 4.05 4.86 6.48
extension use chart below. To determine force 3.0 0.19 0.39 0.49 0.58 0.78 0.97 1.46 1.94 2.43 2.92 3.89 4.86 5.83 7.78
developed in retract subtract the force that 3.5 0.23 0.45 0.57 0.68 0.91 1.13 1.70 2.27 2.84 3.40 4.54 5.67 6.81 9.08
4.0 0.26 0.52 0.65 0.78 1.04 1.30 1.94 2.59 3.24 3.89 5.19 6.48 7.78 10.37
corresponds to cylinder piston rod diameter. 5.0 0.32 0.65 0.81 0.97 1.30 1.62 2.43 3.24 4.05 4.86 6.48 8.10 9.72 12.97
6.0 0.39 0.78 0.97 1.17 1.56 1.94 2.92 3.89 4.86 5.83 7.78 9.72 11.67 15.56
CYL. CYL. 500 1000 1500 2000 2500 3000 7.0 0.45 0.91 1.13 1.36 1.82 2.27 3.40 4.54 5.67 6.81 9.08 11.34 13.61 18.15
DIA AREA PSI PSI PSI PSI PSI PSI 8.0 0.52 1.04 1.30 1.56 2.07 2.59 3.89 5.19 6.48 7.78 10.37 12.97 15.56 20.74
.50 .20 98 196 295 393 491 589 9.0 0.58 1.17 1.46 1.75 2.33 2.92 4.38 5.83 7.29 8.75 11.67 14.59 17.50 23.34
.75 .44 221 442 663 884 1104 1325 10.0 0.65 1.30 1.63 1.96 2.59 3.24 4.86 6.48 8.10 9.72 12.97 16.21 19.45 25.93
.88 .60 301 601 902 1203 1503 1804 11.0 0.71 1.43 1.78 2.14 2.85 3.57 5.35 7.13 8.91 10.70 14.26 17.83 21.39 28.52
12.0 0.78 1.56 1.94 2.33 3.11 3.89 5.83 7.78 9.72 11.67 15.56 19.45 23.34 31.12
1.00 .79 393 785 1178 1571 1964 2356
13.0 0.84 1.69 2.11 2.53 3.37 4.21 6.32 8.43 10.53 12.64 16.85 21.07 25.28 33.71
1.13 .99 497 994 1491 1988 2485 2982
14.0 0.91 1.82 2.27 2.72 3.63 4.54 6.81 9.08 11.34 13.61 18.15 22.69 27.23 36.30
1.25 1.23 614 1227 1841 2454 3068 3682 15.0 0.97 1.94 2.43 2.92 3.89 4.86 7.29 9.72 12.15 14.59 19.45 24.31 29.17 38.90
1.38 1.48 742 1485 2227 2970 3712 4455 16.0 1.04 2.07 2.59 3.11 4.15 5.19 7.78 10.37 12.97 15.56 20.74 25.93 31.12 41.49
1.50 1.77 884 1767 2651 3534 4418 5301 17.0 1.10 2.20 2.76 3.31 4.41 5.51 8.27 11.02 13.78 16.53 22.04 27.55 33.06 44.08
1.75 2.41 1203 2405 3608 4811 6013 7216 18.0 1.17 2.33 2.92 3.50 4.67 5.83 8.75 11.67 14.59 17.50 23.34 29.17 35.01 46.67
2.00 3.14 1571 3142 4712 6283 7854 9425 19.0 1.23 2.46 3.08 3.70 4.93 6.16 9.24 12.32 15.40 18.48 24.63 30.79 36.95 49.27
20.0 1.30 2.59 3.24 3.89 5.19 6.48 9.72 12.97 16.21 19.45 25.93 32.41 38.90 51.86
2.50 4.91 2454 4909 7363 9817 12272 14726
25.0 1.62 3.24 4.05 4.86 6.48 8.10 12.15 16.21 20.26 24.31 32.41 40.52 48.62 64.83
3.00 7.07 3534 7069 10603 14137 17672 21206 30.0 1.94 3.89 4.86 5.83 7.78 9.72 14.59 19.45 24.31 29.17 38.90 48.62 58.34 77.79
3.50 9.62 4811 9621 14432 19242 24053 28863 35.0 2.27 4.54 5.67 6.81 9.08 11.34 17.02 22.69 28.36 34.03 45.38 56.72 68.07 90.76
4.00 12.57 6283 12566 18850 25133 31416 37699 40.0 2.59 5.19 6.48 7.78 10.37 12.97 19.45 25.93 32.41 38.90 51.86 64.83 77.79 103.72
4.50 15.90 7952 15904 23857 31809 39761 47713 45.0 2.92 5.83 7.29 8.75 11.67 14.59 21.88 29.17 36.46 43.76 58.34 73.93 87.51 116.69
5.00 19.64 9817 19635 29453 39270 49087 58905 50.0 3.24 6.48 8.10 9.72 12.97 16.21 24.31 32.41 40.52 48.62 64.83 81.03 97.24 129.65
6.00 28.27 14137 28274 42412 56549 70686 84823 55.0 3.57 7.13 8.91 10.70 14.26 17.83 26.74 35.65 44.57 53.48 71.31 89.14 106.96 142.62
60.0 3.89 7.78 9.72 11.67 15.56 19.45 29.17 38.90 48.62 58.34 77.79 97.24 116.69 155.58
8.00 50.27 25133 50266 75398 100531 125664 150797
65.0 4.21 8.43 10.53 12.64 16.85 21.07 31.60 42.14 52.67 63.20 84.27 105.34 126.41 168.55
CATV 70-09-04-01
V70 PRINCE MANUFACTURING CORPORATION • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000
URL: www.princehyd.com • E-MAIL: prince@princehyd.com
O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181