Professional Documents
Culture Documents
Rubber
manila corporation
Machine description:
Mixer Are used for the manufacture of rubber compounds. A rubber base
Roller material is Mixed with several additives, such as fillers, softeners,
processing aids and Colourants here. The two rolls of the rolling mill
rotate in the opposite direction.
Crusher Is used for crushing the rubber blocks into 5-60 mesh rubber powder.
The two roller of rubber crusher make relative rotation indifferent
velocity. Rubber blocks are drawn into the gap of the two roller for
machining. By adjusting the roll gap, we get rubber powder of
different size. The size of the final crumb can reach 5-60 mesh.
larger size has high capacity.
Check noisy x
operation.
Buffing Inspect x
vacuuming
encouraged
to keep dust
to a
minimum.
Use a x
vacuum with
a high CFM
to pick up
dust.
OUR LADY OF LOURDES COLLEGE
COLLEGE OF BUSINESS ADMINISTRATION
Gen. T. De Leon, Karuhatan, Valenzuela City
Label:
Mixer roller
OUR LADY OF LOURDES COLLEGE
01/01/20 Check the components
COLLEGE OFfor lubricant ADMINISTRATION
BUSINESS
Gen. T. De Leon, Karuhatan, Valenzuela City
01/02/20 Maintain the seal
Name of the piece
01/03/20 of equipment:
Protect the mixer Buffing
Hydraulic
Emboss
Coating
Injection
tub Machine
Machine
Machine
Press
Label:
01/04/20 Check the Discharge Gate Operation
Serial number: 075
01/05/20 0456
4560
0563
0654432
897the Coefficient of Variation
987
490
321
Check
Manufacturer: Manila
Slicerrubber
Machine
Manufacturer's contact
02/04/20 person
Thoroughly + contact
clean the slicerdetails: (2)8983
and sharpen the1331
blade.
Date of purchase:
02/10/20 1962sure the blade is clean before sharpening
Make
Date put into service:
Cutter1962
Machine
Person responsible
03/05/20 forthe
Clean equipment: Authorized Assistance
torch body.
Initials of personClean
03/15/20 authorized to use
the torch equipment: Operator
leads
Location of equipment:
03/20/20 Novaliches,
Clean out Caloocan City
the power supply.
Physical condition:
03/30/20 Align and adjust gears and bearing
Service provider(for maintenance
EMBOSS MACHINEand calibration): Technician
COATING MACHINE
INJECTION MACHINE
HYDRAULIC PRESS
ABC LABORATORIES
Equipment Maintenance Logsheet
Maintenance Date of validation Validation performed by: Next
planned on
performed by: before put into maintenance (date):
service:
Buffing weekly 2