Professional Documents
Culture Documents
Price Bid (Packet-Ii) E-Tender No: CEE-P-W-PSI-MUTP-IIIA-01 Dated 06.05.2021 For
Price Bid (Packet-Ii) E-Tender No: CEE-P-W-PSI-MUTP-IIIA-01 Dated 06.05.2021 For
For
Design, Supply, Erection, Testing and Commissioning of 110kV/27kV, single phase
50Hz, AC Traction Substation complete with Double circuit 100kV Two phase incoming
feeder arrangement, two nos. of 110 kV/27kV, 40/56 MVA transformer including
Incoming & Outgoing feeder arrangement including Foundation, Structures & all
Ancillary Equipments at Kanjurmarg Traction sub station & New 3 Nos 25 KV
Sectioning & Paralleling post (SP) at Ghatkopar, Mulund and Dombivali between
CSMT & Kalyan of Mumbai Division in Central Railway.
OFFICE OF THE
CHIEF ELECTRICAL ENGINEER(PROJECT)
WADIBUNDER, MUMBAI – 400 010
M/s. --------------------------------------
--------------------------------------
--------------------------------------
Signature Not
Verified
Digitally signed by
SURESH KUMAR
GUPTA
Date: 2021.05.06
20:09:36 IST
Reason: IREPS-CRIS
Location: New Delhi
INDEX
245
CENTRAL RAILWAY
Chief Electrical Engineer (Project) Wadibunder, Old area Manager’s building 3rd floor, P.D’mello Road
Wadibunder Mumbai 400010 for and on behalf of the President of India invites open E-tender through
website www.ireps.gov.in from reputed Contractors for the following work. Tender submitted manually
shall not be accepted.
TENDER DETAILS
E-Tender No. CEE-P-WB-PSI-MUTP-IIIA-01 dated 06.05.2021
Name of work Design, Supply, Erection, Testing and Commissioning of 110kV/27kV, single
phase 50Hz, AC Traction Substation complete with Double circuit 100kV
Two phase incoming feeder arrangement, two nos. of 110 kV/27kV, 40/56
MVA transformer including Incoming & Outgoing feeder arrangement
including Foundation, Structures & all Ancillary Equipments at Kanjurmarg
Traction sub station & New 3 Nos 25 KV Sectioning & Paralleling post (SP)
at Ghatkopar, Mulund and Dombivali between CSMT & Kalyan of Mumbai
Division of Central Raiway.
Approx. cost Rs. 28,20,58,532.74 ( Rs. Twenty Eight Crore, Twenty Lakh, Fifty Eight
Thousand , Five Hundred Thirty Two and Paise Seventy Four only )
Earnest money NIL.
In lieu of EMD, Bis Security Declaraion as per Proforma avaible on
www.ireps.gov.in is to be ubmitted. whch is mandatory.
Completion period 24 ( Twenty Four ) months from the date of issue of LOA (including monsoon)
Date & Time of All Relevant Documents must be uploaded at the time of participating in the e-
Submission of tender before 15.00 hrs. on 31.05.2021
Tender
Date and Time of opening of Tender The tender will be opened at 15.15 Hours on 31.05.2021
Sale of Tender Tender notice , document can be seen on the above website. Tenderer should
forms be registered themselves for participating in e-tendering.
System of Two Packet System. The tender document along with credentials and
Tendering requisite documents should be signed and uploaded on IREPS website.
Web Address Tender Notice & Tender document can be downloaded from Central Railway’s
web address http://www.ireps.gov.in
Important note 1)Detailed Tender Notice along with eligibility criteria, Tender documents and
for tenderers corrigendum issued from time to time including mode of acceptance of Tender
are available on the web site mentioned above. Changes, if any, would be
posted on this website at least 15 days in advance of opening of tender and
246
may be seen on this website.
2)Tenderers are required to get themselves registered with IREPS website
along with class III Digital signature certificates issued by CCA under IT Act-
2000.
3) Offer entered duly signed shall only be considered.
4)Documents being attached should be signed by the tenderer on its body.
Date & Time of All relevant documents must be uploaded at the time of participating in e-
submission: tender before 15.00 Hrs. on date 31.05.2021
Date and Time of Tender will be opened at 15.15 Hrs on date 31.05.2021.
opening of * Tenderer, who wants to be present at the time of opening of tenders he/they
Technical Bid: may do so.
Eligibility criteria for tenderer, Performance Details can be seen in tender Documents.
Guarantee etc.
Note: 1. For any Corrigendum/Addendum refer to website at least one week in
advance of opening of tender.
2. For any additional information contact Chief Electrical Engineer /Project /WB in his
office on any working day between 10.00 hrs to 17.00 hrs.
( M.S.Rajput)
For Chief Electrical Engineer(Project),
Central Railway,Wadibunder.
for and on behalf of the President of India
Date : 06.05.2021
247
SCHEDULE OF QUANTITIES & PRICES SCHEDULE-01 PART-A ( FOR TSS )
TENDER NO. CEE-P-WB-PSI-MUTP-IIIA-01
Name of Work for Design, Supply, Erection, Testing and Commissioning of 110kV/27kV,
single phase 50Hz, AC Traction Substation complete with Double circuit 110kV Two phase
incoming feeder arrangement, two nos. of 110KV/27kV, 40/56 MVA transformer including
Incoming & Outgoing feeder arrangement including Foundation, Structures & all Ancillary
Equipments at Kanjurmarg Traction Sub station in Mumbai Division of Central Railway.
Item Description Unit QTY Unit Rate in Rs. Total cost
No. Suppl Erection in Rs.
y
1 Designs and drawings for Traction sub station Job 1 0 202769.50 202769.50
feeding post and SP (HW and SW)
2(a)(i) M-20 Concrete For Foundation and Trench in Cu.m 200 0.00 8297.03 1659406.00
hard soil.
(a)(II) M-20 Concrete for Foundation and Trench in Cu.m 200 0.00 9455.18 1891036.00
rock
2(b) M-20 Concrete for foundation and trench other Cu.m 750 0.00 7909.34 5932005.00
than hard soil and rock
2(c )(i) Reinforced concrete for foundation, trench and Cu.m 100 0.00 11961.42 1196142.00
baffle wall or any other work
( c) (ii) Cable trench covers Sq.m 90 0.00 2315.34 208380.60
2(d) Brick work 0.00 0.00 0.00
(i) Brick work for oil sump pit and other works Cu.m 75 0.00 5099.61 382470.75
(ii) Plastering of brick work. Sq.m 350 0.00 213.42 74697.00
3 Supply, fabrication, galvanisation and erection Tonne 100 104243.9 6722.79 11096671.00
of steel gantry, portal and supporting Structure 2
and small part steel work
110KV side equipment 0.00 0.00 0.00
4 Transpotation , erection, testing and Each 2 0 403406 806812.00
commissioning of 110KV/27kV, 40/56 MVA
single phase traction Power Transformer with on
load/off load tap changer as per RDSO's
Specification No. TI/SPC/PSI/ TRNPWR/3200
5 Supply, Transportation, Erection, testing and Set 5 1237363. 40074.94 6387191.55
commissioning of 132 kV double pole SF-6/ 37
Vaccum Circuit Breaker with accessories.
6 Supply, erection, testing and commissioning of Each 10 432523.6 1335.09 4338587.20
132 kV,1200-800-400/5A Current Transformer 3
with accessories. (4 core secondary)
7 Supply, erection, testing and commissioning of Each 4 288346.1 10042.61 1193554.88
132 kV Potential Transformer with accessories. 1
8 Supply, erection , testing & commissioning of Set 8 387071.2 14766.23 3214699.52
132 kV Double pole isolator (manually 1
operated) with earthing heel with accessories
9 Supply, erection, testing and commissioning of Each 8 121464.9 2108.50 988587.28
132 kV (96 KV) 10 KA lightning arrestor 1
10 Supply & erection of Zebra ACSR conductor Mtr 600 383.77 40.14 254346.00
for 110 KV string bus-bar in switch yard.
11 110 KV system TEE to suit zebra 28/ 62 mm Each 48 2567.92 94.96 127818.24
dia ACSR conductor on both ways (ID-11040)
or similar.
12 Rigid terminal connector suitable for 28.62 mm Each 32 2480.79 94.96 82424.00
dia alu.conductor to terminal of 110 kV isolator
and 25 kV PT type-II (ID-11120) or (ID-11200)
248
13 Supply & erection of 132 kV termination with Set 16 20111.81 2530.87 362282.88
disc insulator & adjustor
14 Supply & erection of 132 kV termination with Set 16 18057.38 2530.87 329412.00
disc insulator & without adjustor.
15 Supply & erection of 132 kV support insulator. Each 10 39078.14 1689.50 407676.40
25KV side equipements 0 0.00 0.00
16 Supply, Transportation, erection, testing and Each 4 746672.5 16561.74 3052937.08
commissioning of 25 kV Single pole Vacuum 3
Circuit Breaker capacity 2000 Amps. Or high
current capacity LV suitable for 40/56 MVA
transformer current capacity with accessories
27 Supply & erection of 25 kV support insulator Each 120 6857.90 1156.20 961692.00
28 Supply, erection, testing and commissioning of Each 1 413580.5 12041.70 425622.21
25kV/240V Auxiliary supply transformers 100 1
kVA capacity oil type with all accessories.
30 Supply & erection of 25kV drop out fuse switch Set 1 18226.04 959.42 19185.46
assembly for 100 KVA Auxiliary supply for
100 KVA Auxiliary supply Transformer along
with operation pole
249
31 Supply & erection of 25kV drop out fuse switch Set 1 23115.17 978.02 24093.19
assembly for 25 KVA Auxiliary supply
Transformer along with operation pole
32 Supply of tubular Aluminium bus bar of nominal Metrs 950 1331.15 147.59 1404803.00
pipe size 3 inch IPSS ANSI schedule 80. and
suitable for 40/56 MVA transformers
33 Supply & erection connecting testing & Nos. 0.00 0.00 0.00
commissioning of bus-bar junction, connector
etc. suitable for current capacity of 40/56MVA
transformer
(i) Supply of Rigid bimetallic terminal connector to Each 120 5587.90 87.29 681022.80
suit of nominal pipe size 3 inch Ips ANSI
schedule 80 Aluminum tubular bus bar terminal
pad of 25 KV CT/Isolator .
iii Supply of 25 KV system rigid bus slpice Each 48 5425.16 87.29 264597.60
coonector to suit of nominal pipe size 3 inch
IPS ANSI schedule 80 Aluminum tube on both
ways.
vii Supply of 25 KV system TEE coonector to suit Each 27 5160.03 87.29 141677.64
of nominal pipe size 3 inch IPS ANSI schedule
80 Aluminum tubular Spider AAC conductor.
viii Supply of 25KV system TEE to suit ZEBRA ( Each 60 5205.74 87.29 317581.80
28.58 dia) ACSR coductor on both bays (ID-
11040)
ix Supply of 25KV system TEE to suit 36 O/D Al Each 100 5547.67 87.29 563496.00
bus bar to 50 mm O/D Al Busbar ( ID 11240) .
x Supply of Al busbar connector bus terminal Each 24 4044.64 87.29 99166.32
(6480)
xi Supply of Al bus bar connector Bus splice ( Each 60 4123.27 87.29 252633.60
6490)
xii Supply of Al bus bar connector Bus TEE Each 60 4207.38 87.29 257680.20
connector ( 6500)
xv Supply of Al bus bar connector flexible bus Each 120 9489.92 87.29 1149265.20
splice ( 6550)
xvi Supply of Al bus bar connector terminal Each 120 3172.45 87.29 391168.80
connector bolted type ( 6830-1)
250
(xvii) 25 kV system TEE connector to suit 3inch O/D Each 27 2524.84 94.96 70734.60
alu.tube and Zebra conductor(ID-11140)
(xviii) Rigid connector on SI to suit 3 inch O/D AL Each 60 1551.72 94.96 98800.80
bus bar (ID- 11200).
(xix) Sliding clamp for 3 inch OD AL.bus bar (ID Each 24 1551.72 94.96 39520.32
11190).
xx ) Rigid connector on SI to suit Zebra ACSR Each 12 1594.79 94.96 20277.00
conductor (ID-11050 or similar)
34 Supply & erection of 240V L.T. Distribution Each 1 54310.03 7721.37 62031.40
Board in the switch yard for 100 KVA L.T.
Supply Transformer.
34 A Supply, erection, laying & commissioning of 0.00 0.00 0.00
Cables ( armoured and fire retatdent ) :
a For transformer alarm/ trip circuits and Tap Mtr 1350 398.45 19.58 564340.50
changer Control. (10 core X 2.5 sqmm Cu).
b For transformer alarm/trip circuits and Tap Mtr 5000 231.04 18.60 1248200.00
changer Control. (7 core X 2.5 sqmm Cu ).
c For transformer bushing CT circuits and110 V Mtr 600 231.04 15.66 148020.00
DC circuits. (4 core X 4.0 mm2Copper).
d Current Transformer circuits, 110 V DC and Mtr 9000 103.77 15.66 1074870.00
240V AC Supply circuit (2 core 4.0 mm2
Copper).
e Potential Transformer circuits, 110 V DC and Mtr 4500 103.77 15.66 537435.00
240V AC Supply circuit (2 core 2.5 mm2
Copper).
f 240 V heater circuit ( 2 C x 4.0 mm2 cu ) Mtr 600 103.77 15.66 71658.00
g For L.T. Power supply from 100 KVA transf- Mtr 30 1727.94 60.70 53659.20
ormer to control room 2 x 300sqmm Al XLPE
h For connecting Battery to charger and control Mtr 100 231.04 18.60 24964.00
panel 2C x 10 sqmm copper cable
i For L.T. Power supply from 25 KVA transf- Mtrs 50 305.45 15.66 16055.50
ormer to control room 2 x 70 sqmm Al XLPE
35 Supply and erection of Earth system 0.00 0.00 0.00
a Earth electrode as per IS 3043 and RDSO Each 40 4044.66 1476.62 220851.20
specification for TSS and SP
(b)(i) Earth lead 75 X 8 mm GI strip. 0.00 0.00 0.00
(b)(ii) Laid in the ground. Mtr 1500 488.52 154.68 964800.00
(c) Laid exposed. Mtr 800 488.52 94.96 466784.00
(c )(i) Earth lead 50 X 6 mm GI strip 0.00 0.00 0.00
(c )(ii) Laid in the ground Mtr 1500 247.69 94.96 513975.00
(d) Laid exposed Mtr 1500 247.69 76.36 486075.00
(e) 8 SWG G.I. wire for earthing Mtr 200 34.27 14.69 9792.00
f 32/36/40 mm dia MS rod for earth mat Mtr 2000 188.95 14.69 407280.00
g Supply and erection of earth screen wire of size Mtr 200 388.66 25.45 82822.00
19/2.5mm.
36 a Supply and erection of fencing panel at Rly.TSS Mtr 400 3536.15 228.11 1505704.00
and FP.
36 b Supply and erection of fencing upright. Tonne 6 74957.14 7721.37 496071.06
37 Supply and erection of gates. Mtr 4.3 6326.30 383.77 28853.30
38 Supply and erection of anti climbing device at Mtr 400 247.69 58.74 122572.00
TSS & Feeding arrangement
39 Supply and spreading of pebbles/ballast/gravel Cu.m 1000 1383 193.84 1576840.00
in the switch yard.
41 Supply & erection of 110 V,300AH LMLA Set 1 517135.2 7267.12 524402.33
batteries. For TSS 1
Supply & erection of Battery charger for 110 Set 2 455705.9 1201.23 913814.26
42
V,300 AH LMLA Batteries. For TSS 0
43 Supply & erection of 240V L.T. Distribution Each 1 162937.9 7267.12 170205.03
Board in the switch yard for 100 KVA L.T 1
supply Transformer for TSS
44 Supply & erection of 110V D.C. Distribution Each 1 181851.2 2329.04 184180.25
Boards for TSS . 1
45 Supply, fabrication, and erection of Steel MT 1 50867.86 2677.57 53545.43
chequered plate for trench covers inside control
room
46 Design, supply, erection testing & 0.00 0.00 0.00
commissioning of outgoing feeder arrangement
between the bipolar Isolator gantry & out going
feeder gantry with zebra/ copper conductor as
given below
i Supply,erection,testing &commissioning of 25 Set 50 12944.34 4338.93 864163.50
KV, 9 tonne insulator with turn buckle double
strap single clevis and fixing/termination
arrangement ending clamp for Zebra/copper
conductor.
ii Supply,erection,testing &commissioning of 25 SET 20 10703.41 4338.93 300846.80
KV, 9 tonne insulator without turnbuckle double
strap single clevis and fixing /termination
arrang-ement ending clamp forZebra/copper
conductor
iii Transportation , erection , testing and Mtr 1000 0.00 40.14 40140.00
commissioning of 150 sq.mm Cu. Catenary wire
for crossfeeder on top gantry or running as
feeder line.
47 Transportation , laying, testing and Kms 0.5 0.00 1564689.70 782344.85
commissioning of 66 KV, single core 400 sq
mm copper conductor cable .( Cable and 24 Nos
termnation will be supplied by Railway.
48 Supply, erection, testing and commissioning of Mtr 450 1585.98 40.14 731754.00
160 sq.mmCu. Jumper wire for connection to
feeders & OHE.
49 Supply & erection of bus bar junction & other 0.00 0.00 0.00
connectors.
i Connector for 150 sq.mm feeder wire to 150 Each 36 1551.72 94.96 59280.48
sq.mm jumper wire.
ii Connector for 150 sq.mm feeder wire to 160 Each 36 1551.72 94.96 59280.48
sq.mm jumper wire.
iii Connector for 160 sq.mmjumper wire & Each 24 1551.72 94.96 39520.32
129/242 sqmm auxiliary wire.
iv Connector for 160 sq.mmjumper wire & 193 Each 24 1551.72 94.96 39520.32
sq.mmcontact wire.
50 Indicating Board (Details as Annex-A1) for LS 1 62688.31 5143.67 67831.98
TSS
51 Office Equipment for S/S (Detail as Annex.- LS 1 256326.6 0.00 256326.68
B-1) for TSS 8
52 Supply of Spares for Control & Relay Panel LS 1 3515901. 0.00 3515901.04
(Detail as per Annex- C-1 for TSS 04
53 Portable Fire Fighting Eqpt (Details as LS 1 160913.3 0.00 160913.34
Annex.D-1 for TSS 4
54 Supply of Spares for TSS (Details as LS 1 3472560. 0.00 3472560.97
Annex.E1) 97
55 Supply of TSS Maint-ainance Tools and Plants LS 1 2094888. 0.00 2094888.68
(Details as Annex. F I) 68
252
56 Internal wiring of the control room and LS 1 642615.6 269202.48 911818.08
Illumination of traction substation yard ( Detail 0
as Annexure -H-1 for TSS
57 Splicing & extension of OHE Span 6 13792.24 19549.27 200049.06
58 Conversion of existing uninsulated overlap Each 6 30410.56 21885.12 313774.08
58 A Supply & erection of 9 Ton cut insulators 0.00 0.00 0.00
i for 193 sq mm contact wire Each 12 8661.77 1331.77 119922.48
ii For 129/242 sq mm catenary wire Each 12 8682.74 1331.77 120174.12
59 Supply and erection of 25KV Caution 0.00 0.00 0.00
Boards/Plates
i Warning Board Each 50 815.32 157.30 48631.00
ii Caution board for special location on restricted 150 532.18 178.27 106567.50
Each
clearances.
iii 500 m board. Each 10 907.07 178.27 10853.40
iv 250 m board. Each 10 2013.39 159.92 21733.10
v Panto lower board for Loco / EMU. Each 10 1423.53 157.30 15808.30
vi Panto up board for Loco / EMU. Each 10 1423.53 157.30 15808.30
viii DJ’off’ board. Each 10 1531.01 146.81 16778.20
viii DJ ‘ON’ board. Each 10 1531.01 146.81 16778.20
60 Provisin of Burried Rail earthing system as per Each 1 32000.00 16000.00 48000.00
RDSO SMI No. TI/SMI /0032(Rev-2 or latest)
Rs. Eleven Crore, Eleven Lakh, Twelve Thousand Nine Hundred Nineteen and Paise Fifty seven 111112919.57
only
253
SCHEDULE-02 PART B (SP)
Tender Schedule for Design, Supply, Erection, Testing and Commissioning
of 3 Nos SP at Ghatkopar, Mulund and Dombivali of Mumbai Division in
Central Railway.
Item Description Unit QTY Unit rate Total
No. cost in
Rs.
Supply Erection
1 Designs and drawings & Each 3 0 50000.00 150000.00
preparation of Drwaing lay out of
equipments.
2(a)( M-20 Concrete For Foundation Cu.m 30 0.00 8297.03 248910.90
i) and Trench in hard soil.
(a)(I M-20 Concrete for Foundation Cu.m 30 0.00 9455.18 283655.40
I) and Trench in rock
2(b) M-20 Concrete for foundation Cu.m 150 0.00 7909.34 1186401.00
and trench other than hard soil
and rock
2(c Reinforced concrete for Cu.m 60 0.00 11961.42 717685.20
)(i) foundation, trench and baffle
wall or any other work
( c) Cable trench covers Sq.m 135 0.00 2315.34 312570.90
(ii)
2(d) Brick work 0.00 0.00 0.00
(i) Brick work for oil sump pit and Cu.m 90 0.00 5099.61 458964.90
other works
(ii) Plastering of brick work. Sq.m 320 0.00 213.42 68294.40
3 Supply, fabrication, galvanisation Tonne 110 104243.92 6722.79 12206338.1
and erection of steel gantry, 0
portal and supporting Structure
and small part steel work
4 Supply, Transportation, erection, Each 62 704723.36 15631.69 44662013.1
testing and commissioning of 25 0
kV Single pole Vacuum Circuit
Breaker capacity 1600 Amps.
with accessories
5 Supply, erection, testing and Each 62 123458.75 7104.60 8094927.70
commissioning of 25kV double
pole isolator 1600A with
accessories
6 Supply, erection, testing and Each 40 74741.76 5025.21 3190678.80
commissioning of 25kV Single
pole isolator 1600A with
accessories
7 Extra for interlocking between 25 Each 62 2712.81 307.41 187253.64
kV side of SP and also FP-CB
and isolators.
8 Supply , erection, testing and Each 46 79262.78 3044.69 3786143.62
commissioning of 25 kV
254
potential transformer Type -II
(protection) with accessories
9 Supply, erection, testing and Each 62 110762.10 2419.11 7017235.02
commissioning of 25 kV, 1500-
750/5A two core CT (PS class)
with accessories.
10 Supply, erection, testing and Each 40 40895.77 1422.49 1692730.40
commissioning of 42 kV class 25
KV system metal oxide, station
type Lightning Arrestors 10 KA
(TR Protection) with accessories
11 Supply & erection of 25 kV Each 180 6857.90 1156.20 1442538.00
support insulator
12 Supply, erection, testing and Each 3 253369.12 12669.24 798115.08
commissioning of 25kV/240V
Auxiliary supply transformers
25kVA capacity oil type with all
accessories.
(Railway Supply)
13 Supply & erection of 25kV drop Set 3 23115.17 978.02 72279.57
out fuse switch assembly for 25
KVA Auxiliary supply
Transformer along with operation
pole
14 Supply, erection, testing and Meter 2400 597.19 269.23 2079408.00
commissioning of Tubular
aluminium busbar 50 x 39 mm
dia.
14 A Supply, erection, of Busbar Junction and other Connectors. 0.00
i Rigid bimetallic terminal Each 660 2614.91 94.96 1788514.20
connector suitable for 50mm dia
AL. tubular bus bar terminal pad
of 25 KV Isolator /CT (ID-
11090)
ii 25 kV system rigid bus splice Each 60 2524.84 94.96 157188.24
connector to suit 50 mm O/D dia
AL tube on both ways. ID
11180.
iii 25 KV system TEE connector to Each 144 2524.84 94.96 377251.20
connector to suit AL. 50 O/D alu.
Tubular bus bar ( ID-11150)
iv Rigid through connector to suit Each 78 2482.74 94.96 201060.60
50 mm O/D Al.tubular busbar
and 160 sqmm of Jumper for PT
type-II & 42kV LA (ID11110)
v Rigid connector on SI to suit Each 132 1551.72 94.96 217361.76
50mm O/D and 7 mm dia wire
(ID-11200).
vi Sliding clamp for 50mm OD AL. Each 60 1551.72 94.96 98800.80
bus bar (ID 11190).
255
vii Rigid bimetallic terminal Each 192 1551.72 94.96 316162.56
connector suitable for 50mm dia
AL. tubular bus & 160 Sq.mm
Jumper Wire(ID-11120).
15 Supply & erection of 240V L.T. Each 3 54310.03 7721.37 186094.20
Distribution Board in the switch
yard for 100 KVA L.T. Supply
Transformer.
16 Supply, erection, laying & commissioning of Cables ( armoured 0.00 0.00 0.00
and fire retatdent ) :
a For transformer alarm/trip Mtr 4800 231.04 18.60 1198272.00
circuits and Tap changer Control.
(7 core X 2.5 sqmm Cu ).
b Current Transformer circuits, 110 Mtr 600 131.19 16.64 88698.00
V DC and 240V AC Supply
circuit (2 core 4.0 mm2 Copper).
c Potential Transformer circuits, Mtr 3900 103.77 15.66 465777.00
110 V DC and 240V AC Supply
circuit (2 core 2.5 mm2 Copper).
d 240 V heater circuit ( 2 C x 4.0 Mtr 600 103.77 15.66 71658.00
mm2 cu )
e For L.T. Power supply from 25 Mtrs 150 305.45 15.66 48166.50
KVA transformer to control room
2 x 70 sqmm Al XLPE
17 Supply and erection of Earth 0.00 0.00 0.00
system
a Earth electrode as per IS 3043 Each 60 4044.66 1476.62 331276.80
and RDSO specification for TSS
and SP
b Earth lead 75 X 8 mm GI strip. 0.00 0.00 0.00
bi Laid in the ground. Mtr 1050 488.52 154.68 675360.00
bii Laid exposed. Mtr 1050 488.52 94.96 612654.00
c Earth lead 50 X 6 mm GI strip 0.00 0.00 0.00
ci Laid in the ground Mtr 6000 247.69 94.96 2055900.00
cii Laid exposed Mtr 6000 247.69 76.36 1944300.00
d 8 SWG G.I. wire for earthing Mtr 500 34.27 14.69 24480.00
18.1 Supply and erection of Mtr 400 3536.15 228.11 1505704.00
galvanoised fencing panel at
Rly.TSS and FP.
18.2 Supply and erection of Tonne 3.6 74957.14 7717.46 297628.56
galvanised fencing upright.
18.3 Supply and erection of gates. ( Mtr 3.6 6326.30 383.77 24156.25
Size 1.5 Mtrs L x 3.5 Mtrs H)
18.4 Supply and erection of anti Mtr 400 247.69 58.74 122572.00
climbing device at TSS &
Feeding arrangement
19 Supply and spreading of Cu.m 150 1383 193.84 236526.00
pebbles/ballast/gravel in the
switch yard.
256
20 Design,supply, erection,testing Set 3 6115505.6 321868.77 19312123.0
and commissioning of Control 8
Panel & Relay panel suitable for
SP for 6 /8 track section (12
Nos./16 Nos. , 25KV Feeder CB
& 1 No. 25kV bus coupler or as
per site requirement) as per rly
spec. No.TI/SPC
/PSI/PROTECT/4050 or latest
for SP
21 Supply, erection testing and Set. 3 497244 6987.12 1512693.36
commisioning of 110 V ,200 AH
LMLA batteries at SP. Along
with its battery charger .
22 Supply & erection of 240V LT Each 3 54310 7717.46 186082.38
supply distribution board for SP.
23 Supply, erection, testing & Each 3 181850 2329.04 552537.81
commissioning of 110 V DC supply
distribution board suitable for SP .
24 Supply, fabrication, and erection MT 1.5 50868 2677.57 80318.36
of Steel chequered plate for
trench covers inside control room
25 Design, supply, erection testing & commissioning of outgoing 0.00 0.00 0.00
feeder arrangement between the bipolar Isolator gantry & out
going feeder gantry with zebra/ copper conductor as given below
i Supply,erection,testing Set 108 12944.34 4338.93 1866593.16
&commissioning of 25 KV, 9
tonne insulator with turn buckle
double strap single clevis and
fixing/termination arrangement
ending clamp for Zebra/copper
conductor.
ii Supply,erection,testing SET 200 10703.41 4338.93 3008468.00
&commissioning of 25 KV, 9
tonne insulator without
turnbuckle double strap single
clevis and fixing /termination
arrang-ement ending clamp
forZebra/copper conductor
iii Transportation , erection , testing Mtr 4170 0.00 40.14 167383.80
and commissioning of 150
sq.mm Cu. Catenary wire for
crossfeeder on top gantry or
running as feeder line
iv Transportation, laying, testing Kms 6 0.00 1564689.70 9388138.20
and commissioning of 66 KV,
single core 400 sq mm copper
conductor cable . ( Cable and 120
Nos termination will bew
supplied by Railway).
26 Supply, erection, testing and Mtr 600 1585.98 40.14 975672.00
commissioning of 160 sq.mmCu.
257
Jumper wire for connection to
feeders & OHE.
27 Supply & erection of bus bar junction & other connectors. 0.00
i Connector for 150 sq.mm feeder Each 192 1551.72 94.96 316162.56
wire to 150 sq.mm jumper wire.
ii Connector for 150 sq.mm feeder Each 192 1551.72 94.96 316162.56
wire to 160 sq.mm jumper wire.
iii Connector for 160 sq.mmjumper Each 192 1551.72 94.96 316162.56
wire & 129/242 sqmm auxiliary
wire.
iv Connector for 160 sq.mmjumper Each 192 1551.72 94.96 316162.56
wire & 193 sq.mmcontact wire.
28 Name Board & other indication Sets 3 37240.18 0.00 111720.54
boards as per Annexure-A2
29 Supply of office Equipment LS 3 15543 0.00 46629.00
Anexure-B-2
30 Standby & maintenance spres Set 3 62091 0.00 186273.00
Annexure- C-2
31 Supply & installation of Fire Sets 3 61389 0.00 184167.00
fighting equipments as per
Annexture -D-2
32 Supply of tools & plants Ses 3 22100 0.00 66300.00
AnnexureE-2
33 First Aid Equipment in box & Sets 3 4535.71 0.00 13607.13
one streture
34 Internal wiring of the control LS 3 62108 13459.29 226701.87
room and yard lighting as per
Railway's drwaing as per
enclosed Annexture -F-2
35 Provision of PTFE ( PTFE Will Nos. 20 13850 10073.85 478477.00
be supplied by Railway.) .
36 Provisin of Burried Rail earthing Each 3 32000.00 16000.00 144000.00
system as per RDSO SMI No.
TI/SMI /0032(Rev-2 or latest)
TOTAL Rs 141474242.34
TOTAL Rs. Fourteen Crore, Fourteen Lakh Seventy Four Thousand Two Hundred Forty
Two and Paise Thirty Four only
258
SCHEDULE OF QUANTITIES & PRICES
259
8 1 KV Digital Insulation Tester, Voltage Range from 50V to 1 No. 1,74,018
100V, CAT IV 600V applications, TRMS & DC Voltage
measurement, insulation testing up to 1000 V and 200
continuity testing at 200 mA or 20 mA down to 0.01 pass/fail
limit alarms, Combined Analogue and dual digital display,
PI/DAR and Timer function, Test result storage, Bluetooth
wireless data transfer, the instruments meet IEC61010-1 to
600 V phase to earth, Category IV. Refer to safety warnings
supplied, EMC in accordance with IEC61326-1, IP 54
protected against dust and
splashing water as per specification.
9 CT & PT Analyses, testing ability PT and CT & CT knee 1 No. 58,09,300
points up to 30KV, CT grouped testing includes
Demagnetization, knee points, Ratios , saturations Curves,
Winding Resistances, polarities and phase deviation (on all
taps of multi-ratio CTs), VT testing including
demagnetizations, Ratio Winding Resistance, Polarity and
Phase Deviation, Integrated 1 KVDC insulation test system,
Automatic testing according to ANSI C57.13; IEC 60044-6; or
IEC61869-2 on Relaying/protection class CTs., and IEC
61869-3 on inductive Voltage Transformers should Excellent
noise immunity from energized power lines in substations, Test
Current on Load: ImA at min pass values of insulation (as
specified in BS7671, HD 384 and IEC 364) as per
specification.
10 Power Quality Analyzer, Meets IEC61000-4-30 class A 1 No. 24,95,072
compliance, power off of phase A voltage as/de 1000 V dc
range with Four voltage & 5 Current Channels, along with 10
A CT, On-board data analysis, RMS voltage/current
measurement total harmonic distortion, DC voltage, total
demand distortion, DC current (requires DC CT), Harmonics
Phase-to-phase voltage, inter-harmonics, Power parameters
(KW,KVAR,KVA,DFA,TPF) Energy parameters ( KWH,
KVARH, KVAH), Voltage sags/dips and swells, power
harmonics phase angles, Harmonic direction, current sags/dips
and swells, IEC flicker, Transient down to 1 m sec Rapid
voltage change, IEC unbalance and ANSII unbalance, phase
angle deviation, frequency compliance should be
safety/EMC/Vibration IEC61326, IEC61000-4-30 IEC60529,
IEC60529, IEC61000-4-15 MIL-STD-810 G IEC61000-4-27
IEEE1453, IEC61010-1 IEEE1459 CAN/CSA-C22 No.1010.1-
92 as per specification
11 Circuit Breaker Analyser, along with Linear & Rotary 1 No. 29,64,840
Transducer, Suitable for testing timing and travel on all circuit
breakers with single interrupter per phase, Two separate timing
channels for measurement of auxiliary contacts, Analog
measurement channels for travel transducers or general
voltage/current measurements, EMC 2004/108/EC, LVD
20006/95/EC
12 Static & Dynamic Resistance Measurement of Circuit 1 No. 11,30,036
Breaker, Number of operations can be run with short waiting
260
intervals, Voltage (max) 12 V DC, Voltage 10V/250 A, short
circuit current (max) 100 mA, should be IP 43, LVD
2006/95/EC,EMC2004/108 as per specification.
13 Primary Current injection Test System for 2000 Amp, Primary 1 No. 37,20,145
current injection testing and breaker testing should be possible,
Testing current transformers, polarity testing, Heat runs,” Automatic
re closers and sectionalizes, Testing integrity of ground grids and
safety ground devices, EMC 2004/108/EC,LVD 2006/95/EC weight
should be less then 20kg, with 2 meter lead set. As per specification.
Relative permittivity Measurement Range 1 to 30,
14 3Phase Relay Test set toolbox for substation 3s- phase testing three 1 No. 55,83,823
currents and four voltages, Rugged and reliable for field use,
Generation of 900V and 105 A in single phase mode, Secondary and
primary testing, should provide Binary inputs & output, shock and
vibration IEC 60068-2-27 Vibration IEC 60068-2-6, EMC
IEC61326-1, LVD IEC61010-1:2010
15 Phase sequence Indicator, LED clockwise and counter clockwise 1 No. 30,015
phase rotation indication, Audible indication of direction voltage
Range up to 500V for frequency of 50 HZ, the instrument complies
with IEC61010 CAT IV600 V, A Specification
16 Multifunction Tester, Instruments for testing of low voltage 1 No. 3,73,122
electrical installations to BS7671, along with insulation test at 250V,
500V and 1000 V,2-wire loop test Non-trip (RCD)and high-current
testing including phase-to-phase, Prospective fault current
measurement up to 20 KA along with RCD testing including
&Continuity and resistance measurement.
17 Tools Box Universal for substation as per specification 1 No. 95,127
18 Helmets Class E- Electrical Hard Hat- White should comfort in 1 No. 4,950
mind and features multiple adjustment points for a personalized
comfortable fit Compliance with ANSI Z89.1-2014 Type 1, Class E
CSA Z94.12015 Type 1, Class E
19 Contact type Voltage Detector for up to 235 KV live ling detection, 1 No. 7,65,503
Equipment provide continuous monitoring with no on/off switch.
They respond to minimum phase-to-ground. Voltages as outlined by
ANSI C84.1 standards, with conformance to IEC guidelines for
capacitive high-voltage test instruments, Operating voltage Range:-
67 to 235 KV Spine fitted for attachment to a universal hot line pole
Electronic, with red LED and audible indication Min voltage range
phase to ground 0 to 38 KV weight should be less then 1 kg as per
specification
Total Cost Rs. 24975738
18% GST on total cost 4495632.84
TOTAL COST of Schedule- 03 Part- C 2,94,71,370.84
SUMMARY
Particulras TOTAL COST Rs.
Sr.No. Type of Schedule
1 Schedule 1-Part A Traction sub station 11,11,12,919.56
2 Schedule 1-Part B SP 141474242.34
Testing and measuring 29471370.84
3 Schedule 1-Part C instrument
TOTAL TENDERED COST Rs. Rs.28,20,58,532..74
261
Notes:
1) Tenderer shall not quote for individual items.
2) Tenderer shall quote percentage below/at par or above of the Railways estimated cost.
3) The tenderer shall quote their firm rates inclusive of sales tax/VAT & other duties
& taxes, GST etc. Octroi exemption certificate form will be issued by the Rlys. On demand as and when
required. No reimbursement will be accepted on this account.
4) The successful tenderer has to provide the materials/items (minor items/accessories items/assembly items
required for completion/commissioning of work which may not be included in the above tender schedule but
considered necessary for the erection and commissioning of assets. No extra cost will be paid to the contractor
for the same.
5) All the work shall be carried out as per IE Rules & Acts.
6) All materials to be used must be of CEE/CR, CORE / RDSO approved make only
262
ANNEXURE TO THE TENDER SCHEDULE 01 ( PART –A ( TSS PORTION)
AND SCHEDULE-02 PART-B (SP Portion) .
******************************************************************
ANNEXURE- A I
ITEM No.-50 of SCHEDULE-01 : Part-A ( TSS Portion)
Indication Boards
Grand
Details Unit Qty. Unit rate Total
Total
SN
Erecti Erecti
Supply Supply
on on
263
ANNEXURE- B I
264
ANNEXURE- C I
265
ANNEXURE- D I
Total of
SN Details Unit Qty. Unit rate Supply &
Supply Erection Erection
TOTAL 164365
Considering Less 2.1% on total cost 160913.34
266
ANNEXURE- E I
ITEM No.-54 of SCHEDULE-01 : Part-A ( TSS Portion)
SUPPLY OF SPARE FOR TSS
267
ANNEXURE- F I
268
ANNEXURE- G I
ITEM No.-55 of SCHEDULE-01 : Part-A ( TSS Portion)
TENDER SCHEDULE FOR ELECTRIFICATION OF
CONTROL ROOMS AND YARD AT TRACTION SUBSTATION
Total of
Unit Rate Total Value
Sr. S &E
Description of Work Qty Unit
No. Erectio Erecti
Supply Supply
n on
ELECTRIFICATION OF
1
CONTROL ROOMS
Supply,erection,testing and
commissioning of point wiring in
PVC casing caping inclusive of
PVC control board with insulated
wire of 1.5 sq.mm and submain
1.1 wiring with 4 Sq mm PVC 20 No 806 93 16120 1860 17980
insulated copper wire of 1.1 kV
grade alongwith 14 SWG tinned
Copper earth wire for FT fitting,
C/Fan, Exhaust fan and Bulk head
fitting.
Erection of Rly Supply F.T.fitting
0 0 0
& ceiling fans
Supply of material and errection of
Rly supplied Ceiling fan with
electronic regulator for
2 TSS.(Ceiling fans with regulators 6 No 108 99 648 594 1242
shall be supplied by Purchaser).
Ceiling Hooks to be provided by
contractor , if not available.
1 x 40 watt 4’ long box type indoor
light with tube blast and other
associate accessories on 2 nos T W
3 15 No 72 87 1080 1305 2385
round blocks ( Box type fitting
along with tubes shall be supplied
bty Railway.
Supply,erection,testing and
commissioning of fire proof bulk
4 1 No 687 72 687 72 759
head fitting with 60 W bulb on
suitable size T W board
Supply,erection,testing and
commissioning of exhaust fan as
per ISS-2312,single phase 380 mm
sweep 1400 RPM complete with
5 1 No 8942 452 8942 452 9394
blades,capacitors,mounting
arrangement of metalic structure,
complete with grills,for battery
room of TSS
269
Supply, erection, testing and
commissioning of 30" sweep, 3
blade type air-circulators complete
with all accessories such as motor,
blades, wire guard, fixing
6 arrangement to work on 230 V 6 No. 19821 1982 118926 11892 130818
single phase, wall mounted with
base plate, GI clamps, nuts&bolts.
The work also includes termination
of fan to mains. The fan shall be
conforming to IS 2997.
Supply,erection,testing and
commissioning of flush type 6pins
5 A/ 15 A socket outlet alongwith
7 wiring in casing capping with 4 14 No 1048 148 14672 2072 16744
sqmm ,pvc insulated ,copper
conductor wire and 14 SWG tinned
copper earth wire
Sheet enclosed 32A MCB
controlled three pin,20A plug socket
8 3 No 2680 112 8040 336 8376
of MDS or equivalent Railway
approved make
Supply,erection,testing and
commissioning of sheet metal MDS
or reputed make distribution board
with 1 No 63 Amps DP incoming
switch and with,4Nos 32A SP,7Nos
16 A SP,2Nos 6A SP outgoing
MCB with 1+1coppre busbar and
two ON/OFF timers for two circuits.
The panel shall be suitable for wall
9 1 No 36765 1598 36765 1598 38363
cum floor mounting arrangements.
It should be hinge type and having
suitable locking arrangement.
Indication neon lamps to be
provided on all the incoming /
outgoing MCB. The panel should be
fabricated by 14 SWG MS sheet and
panel should be powder coated
confirming to relevant ISS.
Illumination of traction sub
0 0 0
station yard
Supply of erection of street light
steel tubular swaged type welded
pole of ISWP 24 designation of 11
Mtr.long having outsidedia &
thickness bottom 168.3 mm x6.3
mm,middle 139.7 mm x 4.5 mm,top
10 4 No 17584 639 70336 2556 72892
114.3 mm x 3.6 5mm as per ISS
2713-1980 or latest. . Holes for
junction box connection wire entry
& stud for earthing connection
should be done before painting &
erection.
Supply of erection of street light
steel tubular swaged type welded
pole of ISWP 13 designation of 9
11 Mtr.long having outsidedia & 9 No 10710 640 96390 5760 102150
thickness bottom 152.4 mm x4.5
mm,middle 127.0 mm x 4.5 mm,top
101.6 mm x 3.6 5mm as per ISS
270
2713-1980 or latest. . Holes for
junction box connection wire entry
& stud for earthing connection
should be done before painting &
erection.
Excavation of pit in all type of soil
size 0.5 x 0.5 x1.8 mtr-4 nos.and
size 0.5 x 0.5 x1.5 mtr-9 nos. and
casting of foundation for grouting of Cu
12 12 0 8407 0 100884 100884
mast with 1:3:6 concrete ratio with Mtr
40 mm grade stone aggregate and
muffing of plinth of 0.3x0.3 M x
0.45 mtr.
Supply,erection,testing and
commissioning of fibre glass
13 13 No 1966 137 25558 1781 27339
reinforced plastic sheet junction
boxes confirming to relevant ISS.
Excavation,laying,filling,testing and
commissioning of 4 core x16 sq.mm
Aluminium cable with roundsteel
GI armoured wire XLPE insulated
and PVC sheathed for 1.1 kV grade
14 750 Mtr. 43 32250 32250
insulation to IS-7098(part-I) 1988
amended uptodate.Cable to be laid
in trench/wall with suitable size
clamps / in GI pipe as per site
requirement.
Supply,erection,testing and
commissiioning of duplicate
earthing arrangement conforming to
15 IS-3040 or latest complete with 8 No 2974 1084 23792 8672 32464
earth pit with , chorcoal and
salt,earthing electrode,GI wire of 8
SWG,GI bolts,nuts,etc.
Supply and erection of 50 mm dia
"B" class GI pipe with brass gland
bushing,GI bent,GI coupling GI
16 30 Mtr. 687 57 20610 1710 22320
clamp GI Bolts,nuts,washers etc.for
cable protection on light poles and
on control room wall
Excavation of 450 mm widex750
mm deep cable trench and refilling
17 959 Mtr. 0 87 83433 83433
and re surfacing the same after
laying of cable
271
Supply,Erection,Testing,Wiring and
Commissioning of 250 Watt LED
flood light Luminaire complete
with control gear & lamp to be fixed
on tubular pole with suitable fixing
20
arrangement .Wiring is to be done
4 No 18644 152 74576 608 75184
from the junction box to luminaire
by 2.5 sq mm pvc insulated copper
conductor wire in GI pipe with
clamp.
Supply,Erection,Testing,Wiring and
Commissioning of 30-33 Watt
outdoor type LED Luminarries
complete with control gear and
lamp to be fixed on tubular pole
21 11 No 2228 222 24508 2442 26950
with suitable fixing arrangement
.Wiring is to be done from the
junction box to luminaire by 2.5 sq
mm pvc insulated copper conductor
wire in GI pipe with clamp.
656400 274977 931377
Considering Less 2.1% on total cost 642615.6 269201 911818.08
272
ANNEXURE-A-2
Unit rate
SN Details Unit Qty. Grand Total
Supply Erection
273
ANNEXURE-B-2
TOTAL 15876
274
ANNEXURE-C-2
275
ANNEXURE-D-2
TOTAL 62706
Considering Less 2.1% on total cost 61389
For 3 Nos SP 184168
ANNEXURE-E-2
TOTAL 22574
276
ANNEXURE-F -2
Total
Sr. Unit Rate Total Value of S & E
Description of Work Qty. Unit
No. Supp Erecti Supp Erecti
ly on ly on
ELECTRIFICATION OF
1 CONTROL ROOMS
1.1 Supply,erection,testing and comm
issioning of point wiring in PVC
casing caping inclusive of PVC
control board with insulated wire of
1.5 sq.mm/submain wiring with 4Sq 10 No 614 72 6140 720 6860
mm PVC insulated copper wire of
1.1 kV grade alongwith 14 SWG
tinned Copper earth wire for
LT,C/Fan and Exhaust fan .
2 Erection of Rly Supply F.T.fitting &
0 0 0 0 0
ceiling fans
2.1 Supply of material and errection of
Rly supplied Ceiling fan with
regulator at SP / SSP.(Ceiling fans
with regulators shall be supplied by 1 No 82 77 82 77 159
Purchaser). Ceiling Hooks to be
provided by contractor , if not
available.
2.2 1 x 40 Watts 4' long box type
indoor tube light fitting with
tube,ballast and other associated
accessaries.on 02 nos T W round 2 No 55 66 110 132 242
blocks .(Box type fittings alongwith
tubes shall be supplied by
Purchaser)
3 Supply,erection,testing and
commissioning of flame proof bulk
1 No 524 55 524 55 579
head fitting with 60 W bulb on
suitable size T W board
4 Supply,erection,testing and commi
ssioning of exhaust fan as per ISS-
2312,single phase 380 mm sweep 1400
RPM complete with blades, 1 No 6820 344 6820 344 7164
capacitors,mounting arrangement of
metalic structure, complete with grills,for
battery room of TSS
5 Supply,erection,testing and comm
issioning of flush type 6pins 5 A/ 15 A
socket outlet alongwith wiring in casing
capping with 4 sqmm ,pvc insulated 2 No 798 113 1596 226 1822
,copper conductor wire and 14 SWG
tinned copper earth wire on separate
control board.
6 Sheet enclosed MCB controlled three
pin , industrial type 32A plug socket
2 No 2044 85 4088 170 4258
of MDS or equivalent Railway
approved make
277
7 Supply,erection,testing and
commissioning of sheet metal MDS or
reputed make distribution board with 1
No 63 Amps DP incoming switch and
with,3Nos 32A SP,3Nos 6A SP outgoing
MCB with 1+1copper busbar and one
ON/OFF timers along with two pole
contactors of 6 Amp for one circuits. The
panel shall be suitable for wall cum floor 1 No 20728 1219 20728 1219 21947
mounting arrangements. It sould be
hinged type and having suitable locking
arrangement. Indication Neon lamps to
be provided on all the incoming/
outgoing MCB. The panel should be
fabricated by 14 SWG MS sheet and panel
should be powder coated confirming to
relevant ISS.
8 Illumination of SP/SSP yard 0 0 0 0 0
8.1 Supply of erection of street light
steel tubular swaged type welded
pole of ISWP 24 designation of 11
Mtr.long having outsidedia &
thickness bottom 168.3 mm x6.3
mm,middle 139.7 mm x 4.5 mm,top 0 No 0 0 0
114.3 mm x 3.6 5mm as per ISS
2713-1980 or latest. . Holes for
junction box connection wire entry &
stud for earthing connection should
be done before painting & erection.
8.2 Supply of erection of street light
steel tubular swaged type welded
pole of ISWP 13 designation of 9
Mtr.long having outsidedia &
thickness bottom 152.4 mm x4.5
mm,middle 127.0 mm x 4.5 mm,top 1 No 7409 488 7409 488 7897
101.6 mm x 3.6 5mm as per ISS
2713-1980 or latest. . Holes for
junction box connection wire entry &
stud for earthing connection should
be done before painting &erection.
8.3 Excavation of pit size 0.5 x 0.5 x1.8
mtr- for item No.8.1 and size 0.5 x
0.5 x1.5 mtr- for item No.8.2 and
casting of foundation with 1:3:6 Cu
1 0 6412 6412 6412
concrete ratio with 40 mm grade Mtr
stone aggregate and plinth of
0.3x0.3 M x 0.45 mtr.with cement
plastering on tubular poles.
8.4 Supply,erection,testing and
commissioning offibre glass
reinforced plastic sheet pole
1 No 1966 137 1966 137 2103
junction boxes with one No.16A
porcelein cut out confirming to
relevant ISS.
9 Supply,Erection,Testing,Wiring and
Commissioning of 250 W outdoor type
metal Halide Luminaire complete with
control gear & lamp to be fixed on
tubular pole with suitable fixing 0 No 11,566 576 0 0 0
arrangement .Wiring is to be done from
the junction box to luminaire by 2.5
sqmm pvc insulated copper conductor
wire in GI pipe with clamp.
278
10 Supply,Erection,Testing,Wiring and
Commissioning of 70 W flood light type
metal Halide Luminaire complete with
control gear & lamp to be fixed on
tubular pole with suitable fixing 2 No 4766 238 9532 476 10008
arrangement .Wiring is to be done from
the junction box to luminaire by 2.5
sqmm pvc insulated copper conductor
wire in GI pipe with clamp.
11 Transportation of
cable,excavation,laying,filling,testing
and commissioning of 4 core x16
sq.mm Aluminium cable with
roundsteel GI armoured wire XLPE
insulated and PVC sheathed for 1.1
30 Mtr. 0 28 0 840 840
kV grade insulation to IS-7098(part-
I) 1988 amended uptodate.Cable to
be laid in trench/wall with suitable
size clamps/in GI pipe as per site
requirement (Cable will be supplied
by Railways at nominated depot)
12 Supply,erection,testing and
commissiioning of duplicate
earthing arrangement conforming to
IS-3043 or latest complete with earth 1 No 2974 1084 2974 1084 4058
pit with , chorcoal and salt,earthing
electrode,GI wire of 8 SWG,GI
bolts,nuts,etc.
13 Supply and erection of 50 mm dia
"B" class GI pipe with brass gland
bushing,GI bent,GI coupling GI
1 Mtr. 687 57 687 57 744
clamp GI Bolts,nuts,washers etc.for
cable protection on light poles and
on control room wall
14 Excavation of 450 mm widex750
mm deep cable tranch and refilling
10 Mtr. 0 56 0 560 560
and re surfacing the same after
laying of cable
15 Supply & laying of RCC warning
20 Nos 35 2 700 40 740
covers
16 Supply & laying of 8 SWG GI wire for
earthing of junction box on tubular 25 Mtr. 21 10 525 250 775
pole
TOTAL 77188
Considering Less 2.1% on total cost
75567.29
For 3 Nos SP
279
ANNEXURE-4
The purchaser will supply the items stated as Rly supply items in explanatory
note to schedule items enclosed in the tender document. These items will be
supplied to the contractor from their depots at Curry road/PNVL/PEN or any
where in Mumbai suburban region. The Contractor has to load, lift, un-load
and transport the materials from the depots mentioned above to site of
works at his own cost. List of major items to be supplied by purchaser and
scope of supply involved is as following:-
280
Form 1
Summery of Prices
From : M/s……………………
………………………
To,
The President of India,
Acting through the Chief Electrical Engineer
(Project) Wadibunder, Central Railway, Mumbai
Dear Sir,
(a) Schedule 1 part A- at *-------------%*( in figures) above/ at par/or below ( in figures) above/ at
par/or below-------------------------------------------------------------------percentage (in words) of the
Railway's schedule of rates of Tender
(b) Schedule 2 part B- at *-------------%*( in figures) above/ at par/or below ( in figures) above/ at
par/or below-------------------------------------------------------------------percentage (in words) of the
Railway's schedule of rates of Tender
(c) Schedule 3 part C- at *-------------%*( in figures) above/ at par/or below ( in figures) above/ at
par/or below-------------------------------------------------------------------percentage (in words) of the
Railway's schedule of rates of Tender
Note:- Contractor must give his offer in words as well as in figures wherever applicable. In case of any
discrepancies between the rates quoted in figures and words, the rate quoted in words will prevail.
(Tenderer shall not quote for individual item, Percentage rates to be quoted both in figures & words)
TOTAL NET QUOTED COST (as per Tender SCHEDULE) = Rs. ……………………
II. It is certified that I/We have inspected the site of work & acquainted myself/ourselves with
local conditions.
III. I/We have carefully gone through the Specifications, Special Conditions etc. attached with the
tender documents.
IV. I/We undertake to keep this offer valid for period indicated in “Tender Form” from the date of
opening of tender and further not to revoke the same before the expiry of such period.
Date:____________
***
281
Form-2
CERTIFICATE OF OFFER
From : *------------------------------------
------------------------------------
To,
The President of India,
Acting through the General Manager,
or his successor,
Office of the Chief Electrical Engineer(Project),
Central Railway,
Wadibunder, Mumbai CST-400010.
Dear Sir,
Sub: Tender No. CEE-P-WB-PSI-MUTP-IIIA-01 dated 06.05.2021 for Design, Supply, Erection, Testing
and Commissioning of 110kV/27kV, single phase 50Hz, AC Traction Substation complete with Double
circuit 110kV Two phase incoming feeder arrangement, two nos. of 110 kV/27kV, 40/56 MVA
transformer including Incoming & Outgoing feeder arrangement including Foundation, Structures & all
Ancillary Equipments at Kanjurmarg Traction sub station & New 3 Nos 25 KV Sectioning &
Paralleling post (SP) at Ghatkopar, Mulund and Dombivali between CSMT & Kalyan of Mumbai
Division of Central Raiway.
********
1. I/We, the undersigned hereby offer to execute the works relating to Tender for Tender No. CEE-P-
WB-PSI-MUTP-IIIA-01 dated 06.05.2021 for Design, Supply, Erection, Testing and Commissioning of
110kV/27kV, single phase 50Hz, AC Traction Substation complete with Double circuit 100kV Two phase
incoming feeder arrangement, two nos. of 110 kV/27kV, 40/56 MVA transformer including Incoming & Outgoing
feeder arrangement including Foundation, Structures & all Ancillary Equipments at Kanjurmarg Traction sub
station & New 3 Nos 25 KV Sectioning & Paralleling post (SP) at Ghatkopar, Mulund and Dombivali between
CSMT & Kalyan of Mumbai Division of Central Raiway in the above mentioned section within a period of
------------months from the date of issue of letter of intent/letter of Acceptance of Tender and in strict
compliance with the provisions detailed in the Tender Papers appended hereto including Instructions
to Tenderers and conditions of Tendering, Conditions of contract and specifications as included therein
and as modified by this Tender at such rates as are specified in schedule and of this Tender enclosed
within a sealed cover. Summary of prices given in Packet-II.
2. I/we agree that this/these tender's shall not be restricted or withdrawn and shall remain open for
acceptance for and during the period of ____ months from the date fixed for opening the same
subject to the stipulation mentioned in clause 1.1.5. and will continue to be open even beyond the
period of ______ months till withdrawn or rejected or accepted as the case may be.
3. I/we fully understand the terms, conditions and other provisions as contained in the Tender papers
and I/we agree that same shall apply to my/our Tender/s as modified by my/our Tender/s and I/we
shall be bound by them.
(a) I/we do not execute the contract documents within 21 days of receipt of notice by the
Railways that such documents are ready or
(b) I/we do not commence work within 10 days of receipt of the instructions to that effect.
4. I/we enclose the Income-tax Clearance Certificate in the prescribed form or a declaration to that
effect as required under para 1.1.6. of the Tender papers pertaining to me/us for the year.
282
5. I/we have no retired engineer or retired gazetted officer of the Engineering Department of any of
the Railways owned and administered by the President of India.
OR
The list of retired engineers or retired gazetted officers who are associated with me/us, is included as
an enclosure to this offer letter. ***
Yours Faithfully,
Seal of the Tenderer
2. Signature
Name in Block Letters
Address
283