Professional Documents
Culture Documents
74HC4051 74HCT4051: 1 General Description
74HC4051 74HCT4051: 1 General Description
1 General description
The 74HC4051; 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable
for use in analog or digital 8:1 multiplexer/demultiplexer applications. The switch features
three digital select inputs (S0, S1 and S2), eight independent inputs/outputs (Yn), a
common input/output (Z) and a digital enable input (E). When E is HIGH, the switches
are turned off. Inputs include clamp diodes. This enables the use of current limiting
resistors to interface inputs to voltages in excess of VCC.
3 Applications
• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
Nexperia
74HC4051; 74HCT4051
8-channel analog multiplexer/demultiplexer
4 Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74HC4051D -40 °C to +125 °C SO16 plastic small outline package; 16 leads; SOT109-1
body width 3.9 mm
74HCT4051D
74HC4051DB -40 °C to +125 °C SSOP16 plastic shrink small outline package; 16 leads; SOT338-1
body width 5.3 mm
74HCT4051DB
74HC4051PW -40 °C to +125 °C TSSOP16 plastic thin shrink small outline package; 16 leads; SOT403-1
body width 4.4 mm
74HCT4051PW
74HC4051BQ -40 °C to +125 °C DHVQFN16 plastic dual in-line compatible thermal enhanced SOT763-1
very thin quad flat package; no leads; 16 terminals;
74HCT4051BQ
body 2.5 x 3.5 x 0.85 mm
5 Functional diagram
VCC
16
13 Y0
S0 11 14 Y1
15 Y2
S1 10 12 Y3
LOGIC 1 Y4
1-OF-8
LEVEL
DECODER
CONVERSION
S2 9 5 Y5
2 Y6
E 6 4 Y7
3 Z
8 7
GND VEE 001aad543
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
11
0
10 0
8X
9 7
2
6
G8
Y0
13
S0 Y1 MUX/DMUX
11 14
13
S1 Y2 0
10 15 14
1
S2 Y3
9 12 15
2
Y4
1 12
3 3
Y5 1
5 4
Y6 5
2 5
E Y7 2
6 4 6
3
4
7
Z
001aad541 001aad542
VCC VEE
VCC VCC
VCC VEE
VEE Z
from
logic
001aad544
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
6 Pinning information
6.1 Pinning
74HC4051
74HCT4051
16 VCC
terminal 1
Y4
index area
1
Y6 2 15 Y2
Z 3 14 Y1
Y7 4 13 Y0
Y5 5 12 Y3
74HC4051
74HCT4051 E 6 VCC(1) 11 S0
VEE 7 10 S1
Y4 1 16 VCC
9
Y6 2 15 Y2
S2
GND
001aad540
Z 3 14 Y1
Y7 4 13 Y0 Transparent top view
Y5 5 12 Y3
(1) This is not a supply pin. The substrate is attached
E 6 11 S0
to this pad using conductive die attach material. There
VEE 7 10 S1
is no electrical or mechanical requirement to solder this
GND 8 9 S2
pad.However, if it is soldered, the solder land should remain
001aad539 floating or be connected to VCC.
Figure 5. Pin configuration SO16, and (T)SSOP16 Figure 6. Pin configuration DHVQFN16
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
7 Function description
[1]
Table 3. Function table
Input Channel ON
E S2 S1 S0
L L L L Y0 to Z
L L L H Y1 to Z
L L H L Y2 to Z
L L H H Y3 to Z
L H L L Y4 to Z
L H L H Y5 to Z
L H H L Y6 to Z
L H H H Y7 to Z
H X X X switches off
8 Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS = 0 V (ground).
Symbol Parameter Conditions Min Max Unit
[1]
VCC supply voltage -0.5 +11.0 V
IIK input clamping current VI < -0.5 V or VI > VCC + 0.5 V - ±20 mA
ISK switch clamping current VSW < -0.5 V or VSW > VCC + 0.5 V - ±20 mA
ISW switch current -0.5 V < VSW < VCC + 0.5 V - ±25 mA
IEE supply current - ±20 mA
ICC supply current - 50 mA
IGND ground current - -50 mA
Tstg storage temperature -65 +150 °C
[2]
Ptot total power dissipation SO16, (T)SSOP16, and - 500 mW
DHVQFN16 package
P power dissipation per switch - 100 mW
[1] To avoid drawing VCC current out of terminal Z, when switch current flows into terminals Yn, the voltage drop across the bidirectional switch must not
exceed 0.4 V. If the switch current flows into terminal Z, no VCC current will flow out of terminals Yn, and in this case there is no limit for the voltage drop
across the switch, but the voltages at Yn and Z may not exceed VCC or VEE.
[2] For SO16 packages: above 70 °C the value of Ptot derates linearly with 8 mW/K.
For SSOP16 and TSSOP16 packages: above 60 °C the value of Ptot derates linearly with 5.5 mW/K.
For DHVQFN16 packages: above 60 °C the value of Ptot derates linearly with 4.5 mW/K.
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
001aad545 001aad546
10 10
VCC - GND VCC - GND
(V) (V)
8 8
6 operating area 6
operating area
4 4
2 2
0 0
0 2 4 6 8 10 0 2 4 6 8 10
VCC - VEE (V) VCC - VEE (V)
Figure 7. Guaranteed operating area as a function of Figure 8. Guaranteed operating area as a function of
the supply voltages for 74HC4051 the supply voltages for 74HCT4051
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
10 Static characteristics
Table 6. RON resistance per switch for 74HC4051 and 74HCT4051
VI = VIH or VIL; for test circuit see Figure 9.
Vis is the input voltage at a Yn or Z terminal, whichever is assigned as an input.
Vos is the output voltage at a Yn or Z terminal, whichever is assigned as an output.
For 74HC4051: VCC - GND or VCC - VEE = 2.0 V, 4.5 V, 6.0 V and 9.0 V.
For 74HCT4051: VCC - GND = 4.5 V and 5.5 V, VCC - VEE = 2.0 V, 4.5 V, 6.0 V and 9.0 V.
Symbol Parameter Conditions Min Typ Max Unit
Tamb = 25 °C
RON(peak) ON resistance (peak) Vis = VCC to VEE
[1]
VCC = 2.0 V; VEE = 0 V; ISW = 100 μA - - - Ω
VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA - 100 180 Ω
VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA - 90 160 Ω
VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA - 70 130 Ω
RON(rail) ON resistance (rail) Vis = VEE
[1]
VCC = 2.0 V; VEE = 0 V; ISW = 100 μA - 150 - Ω
VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA - 80 140 Ω
VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA - 70 120 Ω
VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA - 60 105 Ω
Vis = VCC
[1]
VCC = 2.0 V; VEE = 0 V; ISW = 100 μA - 150 - Ω
VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA - 90 160 Ω
VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA - 80 140 Ω
VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA - 65 120 Ω
ΔRON ON resistance mismatch Vis = VCC to VEE
between channels VCC = 2.0 V; VEE = 0 V
[1]
- - - Ω
VCC = 4.5 V; VEE = 0 V - 9 - Ω
VCC = 6.0 V; VEE = 0 V - 8 - Ω
VCC = 4.5 V; VEE = -4.5 V - 6 - Ω
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
[1] When supply voltages (VCC - VEE) near 2.0 V the analog switch ON resistance becomes extremely non-linear. When using a supply of 2 V, it is
recommended to use these devices only for transmitting digital signals.
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
mnb047
110
(1)
RON
(Ω)
90
Vsw 70
(2)
V
(3)
VCC 50
from select Sn
input
Yn Z 30
10
001aan389 0 1.8 3.6 5.4 7.2 9.0
Vis (V)
Vis = 0 V to (VCC - VEE).
Vis = 0 V to (VCC - VEE).
(1) VCC = 4.5 V
(2) VCC = 6 V
(3) VCC = 9 V
Figure 9. Test circuit for measuring RON Figure 10. Typical RON as a function of input voltage Vis
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
VCC
from select Sn
input Isw Isw
nYn nZ
A A
001aah827
VCC
HIGH
Sn
from select
input Isw
nYn nZ Vos
A
001aah828
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
11 Dynamic characteristics
Table 9. Dynamic characteristics for 74HC4051
GND = 0 V; tr = tf = 6 ns; CL = 50 pF; for test circuit see Figure 15.
Vis is the input voltage at a Yn or Z terminal, whichever is assigned as an input.
Vos is the output voltage at a Yn or Z terminal, whichever is assigned as an output.
Symbol Parameter Conditions Min Typ Max Unit
Tamb = 25 °C
[1]
tpd propagation delay Vis to Vos; RL = ∞ Ω; see Figure 13
VCC = 2.0 V; VEE = 0 V - 14 60 ns
VCC = 4.5 V; VEE = 0 V - 5 12 ns
VCC = 6.0 V; VEE = 0 V - 4 10 ns
VCC = 4.5 V; VEE = -4.5 V - 4 8 ns
[2]
ton turn-on time E to Vos; RL = ∞ Ω; see Figure 14
VCC = 2.0 V; VEE = 0 V - 72 345 ns
VCC = 4.5 V; VEE = 0 V - 29 69 ns
VCC = 5.0 V; VEE = 0 V; CL = 15 pF - 22 - ns
VCC = 6.0 V; VEE = 0 V - 21 59 ns
VCC = 4.5 V; VEE = -4.5 V - 18 51 ns
[2]
Sn to Vos; RL = ∞ Ω; see Figure 14
VCC = 2.0 V; VEE = 0 V - 66 345 ns
VCC = 4.5 V; VEE = 0 V - 28 69 ns
VCC = 5.0 V; VEE = 0 V; CL = 15 pF - 20 - ns
VCC = 6.0 V; VEE = 0 V - 19 59 ns
VCC = 4.5 V; VEE = -4.5 V - 16 51 ns
[3]
toff turn-off time E to Vos; RL = 1 kΩ; see Figure 14
VCC = 2.0 V; VEE = 0 V - 58 290 ns
VCC = 4.5 V; VEE = 0 V - 31 58 ns
VCC = 5.0 V; VEE = 0 V; CL = 15 pF - 18 - ns
VCC = 6.0 V; VEE = 0 V - 17 49 ns
VCC = 4.5 V; VEE = -4.5 V - 18 42 ns
[3]
Sn to Vos; RL = 1 kΩ; see Figure 14
VCC = 2.0 V; VEE = 0 V - 61 290 ns
VCC = 4.5 V; VEE = 0 V - 25 58 ns
VCC = 5.0 V; VEE = 0 V; CL = 15 pF - 19 - ns
VCC = 6.0 V; VEE = 0 V - 18 49 ns
VCC = 4.5 V; VEE = -4.5 V - 18 42 ns
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Vis input 50 %
tPLH tPHL
Vos output 50 %
001aad555
VI
E, Sn inputs VM
0V
tPLZ tPZL
Vos output 50 %
10 %
tPHZ tPZH
90 %
50 %
Vos output
001aad556
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
tW
VI
90 %
negative
pulse VM VM
10 %
0V
tf tr
tr tf
VI
90 %
positive
pulse VM VM
10 %
0V
tW
VI Vos RL S1
PULSE
DUT open
GENERATOR
RT CL
GND
VEE
001aae382
[1] tr = tf = 6 ns; when measuring fmax, there is no constraint to tr and tf with 50 % duty factor.
[2] VI values:
For 74HC4051: VI = VCC
For 74HCT4051: VI = 3 V
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
[1] Adjust input voltage Vis to 0 dBm level (0 dBm = 1 mW into 600 Ω).
[2] Adjust input voltage Vis to 0 dBm level at Vos for 1 MHz (0 dBm = 1 mW into 50 Ω).
VCC
Sn
10 µF
Yn/Z Z/Yn
Vis Vos
VEE GND RL CL dB
001aan385
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
VCC
Sn
0.1 µF
Yn/Z Z/Yn
Vis Vos
VEE GND RL CL dB
001aan386
- 40
- 60
- 80
- 100
10 102 103 104 105 106
fi (kHz)
Sn, E
Vct
Yn Z
001aan387
Figure 18. Test circuit for measuring crosstalk between control input and any switch
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
VCC
Sn
10 µF
Yn/Z Z/Yn
Vis Vos
VEE GND RL CL dB
001aan385
-1
-3
-5
10 102 103 104 105 106
f (kHz)
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
12 Package outline
SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1
D E A
X
y HE v M A
16 9
Q
A2
(A 3) A
A1
pin 1 index
θ
Lp
1 8 L
e w M detail X
bp
0 2.5 5 mm
scale
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
99-12-27
SOT109-1 076E07 MS-012
03-02-19
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1
D E A
X
c
y HE v M A
16 9
Q
A2 A
A1 (A 3)
pin 1 index
θ
Lp
L
1 8 detail X
w M
e bp
0 2.5 5 mm
scale
mm
0.21 1.80 0.38 0.20 6.4 5.4 7.9 1.03 0.9 1.00 8o
2 0.25 0.65 1.25 0.2 0.13 0.1
0.05 1.65 0.25 0.09 6.0 5.2 7.6 0.63 0.7 0.55 0o
Note
1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
99-12-27
SOT338-1 MO-150
03-02-19
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1
D E A
X
y HE v M A
16 9
Q
A2 (A 3 )
A
A1
pin 1 index
θ
Lp
L
1 8
detail X
w M
e bp
0 2.5 5 mm
scale
mm
0.15 0.95 0.30 0.2 5.1 4.5 6.6 0.75 0.4 0.40 8o
1.1 0.25 0.65 1 0.2 0.13 0.1
0.05 0.80 0.19 0.1 4.9 4.3 6.2 0.50 0.3 0.06 0o
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
99-12-27
SOT403-1 MO-153
03-02-18
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
DHVQFN16: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;
16 terminals; body 2.5 x 3.5 x 0.85 mm SOT763-1
D B A
A
A1
E c
terminal 1 detail X
index area
terminal 1 C
e1
index area
e b v M C A B y1 C y
w M C
2 7
1 8
Eh e
16 9
15 10
Dh
X
0 2.5 5 mm
scale
DIMENSIONS (mm are the original dimensions)
A(1)
UNIT
max.
A1 b c D (1) Dh E (1) Eh e e1 L v w y y1
02-10-17
SOT763-1 --- MO-241 ---
03-01-27
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
13 Abbreviations
Table 13. Abbreviations
Acronym Description
CDM Charged Device Model
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
MM Machine Model
14 Revision history
Table 14. Revision history
Document ID Release date Data sheet status Change notice Supersedes
74HC_HCT4051 v.9 20170926 Product data sheet - 74HC_HCT4051 v.8
Modifications: • The format of this data sheet has been redesigned to comply with the identity guidelines of
Nexperia.
• Legal texts have been adapted to the new company name where appropriate.
74HC_HCT4051 v.8 20160205 Product data sheet - 74HC_HCT4051 v.7
Modifications: • Type numbers 74HC4051N and 74HCT4051N (SOT38-4) removed.
74HC_HCT4051 v.7 20120719 Product data sheet - 74HC_HCT4051 v.6
Modifications: • CDM added to features.
74HC_HCT4051 v.6 20111213 Product data sheet - 74HC_HCT4051 v.5
Modifications: • Legal pages updated.
74HC_HCT4051 v.5 20110513 Product data sheet - 74HC_HCT4051 v.4
74HC_HCT4051 v.4 20110117 Product data sheet - 74HC_HCT4051 v.3
74HC_HCT4051 v.3 20051219 Product specification - 74HC_HCT4051_CNV_2
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
15 Legal information
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple
devices. The latest product status information is available on the Internet at URL http://www.nexperia.com.
15.3 Disclaimers Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
Limited warranty and liability — Information in this document is believed
damage to the device. Limiting values are stress ratings only and (proper)
to be accurate and reliable. However, Nexperia does not give any
operation of the device at these or any other conditions above those
representations or warranties, expressed or implied, as to the accuracy
given in the Recommended operating conditions section (if present) or the
or completeness of such information and shall have no liability for the
Characteristics sections of this document is not warranted. Constant or
consequences of use of such information. Nexperia takes no responsibility
repeated exposure to limiting values will permanently and irreversibly affect
for the content in this document if provided by an information source outside
the quality and reliability of the device.
of Nexperia. In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation -
lost profits, lost savings, business interruption, costs related to the removal Terms and conditions of commercial sale — Nexperia products are
or replacement of any products or rework charges) whether or not such sold subject to the general terms and conditions of commercial sale, as
damages are based on tort (including negligence), warranty, breach of published at http://www.nexperia.com/profile/terms, unless otherwise agreed
contract or any other legal theory. Notwithstanding any damages that in a valid written individual agreement. In case an individual agreement is
customer might incur for any reason whatsoever, Nexperia's aggregate and concluded only the terms and conditions of the respective agreement shall
cumulative liability towards customer for the products described herein shall apply. Nexperia hereby expressly objects to applying the customer’s general
be limited in accordance with the Terms and conditions of commercial sale of terms and conditions with regard to the purchase of Nexperia products by
Nexperia. customer.
Right to make changes — Nexperia reserves the right to make changes No offer to sell or license — Nothing in this document may be interpreted
to information published in this document, including without limitation or construed as an offer to sell products that is open for acceptance or
specifications and product descriptions, at any time and without notice. This the grant, conveyance or implication of any license under any copyrights,
document supersedes and replaces all information supplied prior to the patents or other industrial or intellectual property rights.
publication hereof.
Export control — This document as well as the item(s) described herein
Suitability for use — Nexperia products are not designed, authorized or may be subject to export control regulations. Export might require a prior
warranted to be suitable for use in life support, life-critical or safety-critical authorization from competent authorities.
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Non-automotive qualified products — Unless this data sheet expressly design and use of the product for automotive applications beyond Nexperia's
states that this specific Nexperia product is automotive qualified, the standard warranty and Nexperia's product specifications.
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia Translations — A non-English (translated) version of a document is for
accepts no liability for inclusion and/or use of non-automotive qualified reference only. The English version shall prevail in case of any discrepancy
products in automotive equipment or applications. In the event that customer between the translated and English versions.
uses the product for design-in and use in automotive applications to
automotive specifications and standards, customer (a) shall use the product
without Nexperia's warranty of the product for such automotive applications,
use and specifications, and (b) whenever customer uses the product for
automotive applications beyond Nexperia's specifications such use shall be
15.4 Trademarks
solely at customer’s own risk, and (c) customer fully indemnifies Nexperia Notice: All referenced brands, product names, service names and
for any liability, damages or failed product claims resulting from customer trademarks are the property of their respective owners.
74HC_HCT4051 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Contents
1 General description ............................................ 1
2 Features and benefits .........................................1
3 Applications .........................................................1
4 Ordering information .......................................... 2
5 Functional diagram ............................................. 2
6 Pinning information ............................................ 4
6.1 Pinning ............................................................... 4
6.2 Pin description ................................................... 4
7 Function description ...........................................5
8 Limiting values .................................................... 5
9 Recommended operating conditions ................ 6
10 Static characteristics .......................................... 7
11 Dynamic characteristics ...................................15
11.1 Additional dynamic characteristics ...................22
12 Package outline .................................................25
13 Abbreviations .................................................... 29
14 Revision history ................................................ 29
15 Legal information .............................................. 30
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section 'Legal information'.