You are on page 1of 2

|  Sbis molut lam ra ium quid  |

| Incubation |

Pas Reform
SmartPro™ Combi
Incubator
For hen eggs
Designed to meet the specific requirements of small,
Bovendorpsstraat 11
specialised hatcheries
7038 CH Zeddam
The Netherlands

Phone +31 314 659 111


info@pasreform.com
www.pasreform.com
Setting and hatching functions in one

SmartPro™ Combi Incubator cabinet

Benefits How it works Related products


The SmartPro™ Combi Incubator has been – The SmartPro™ Combi Incubator is
SmartTray™ 150
designed to incorporate the features and constructed from heavy duty, waterproof
advantages of Pas Reform’s larger SmartPro™ panels and equipped with electronic SmartBasket™
incubation technologies, to meet the specific temperature and humidity controls
SmartTouch™
requirements of small, specialised hatcheries. – The machine incorporates a reliable, fully
The Combi offers controlled setting and automatic, mechanical turning device which
hatching functions in one cabinet and can be rotates the eggs through 90° at programmable
used for various species, including hen, ostrich, time periods
duck, goose or turkey. Flexible in operation, the – SmartTouch™ multi-language user interface
unit can be used solely as a setter, a hatcher or design makes operation simple and easily
as a combination of both. Easily manoeuvrable accessible to operators of all skill levels
when fitted with large swivel wheels, the – The Combi is shipped fully assembled, and is
SmartPro™ Combi Incubator is supplied pre- simple to install and operate
tested, ready to plug in and start incubating.

Technical Specifications
Hen egg capacity C-21 C-41 C-61 C-82*
(150 tray)
Setting > 600 > 900 > 1,200 > 1,800
Hatching > 600 > 900 > 1,200
Setting/Hatching > 300/150 > 600/150 > 900/150
Dimensions (LxWxH) > 1640x810x1080 mm > 1640x810x1340 mm > 1620x810x1590 mm > 1620x810x1990 mm
Dimensions movable > 1280x820x130 mm > 1280x820x130 mm > 1280x820x130mm > 1280x820x130 mm
frame (optional)
* C-82 only suitable for incubation up to day 11
Bovendorpsstraat 11
Electrical requirements > 230 volts / 4 amp. / 50 Hz / 1 Ph + 0 + PE 7038 CH Zeddam
Installed power > 750W The Netherlands
Water temperature > 12° - 15° C
Water pressure > 2.5 bar Phone +31 314 659 111
Water consumption > 5 ltr/min info@pasreform.com
www.pasreform.com
Due to continuous product development specifications are subject to change without prior notice. Version 2020_03

You might also like