Professional Documents
Culture Documents
Water-based pad printing ink for textiles Satin gloss, good opacity, medium-fast Vers. 4
and wood, ABS, PS, PVC, PC, PA, pretrea- drying speed, for textiles ("tagless print- 2021
ted PP, and coated substrates ing") and sensitive applications 13. Apr
Page 1/3
Marabu GmbH & Co. KG • Phone +49 7141 6910 • info@marabu-inks.com • www.marabu-inks.com
Technical Data Sheet
Stress resistance
Textiles:
Maximum washing resistance is reached if
prints are allowed to dry for 2 days at 20 °C. Auxiliaries
The ironing resistance of Maqua® Pad MAP is
excellent, therefore the temperature resistance HW 1 Hardener, for textiles 10%
AR Anti-Rust Additive 5%
of the substrate is crucial. The textile substrates
WV 1 Retarder 3-10%
do not require any special pre-treatment. For UR 3 Cleaner (flp. 42°C)
materials that are treated with a finishing, pre- PLR Cleaner
liminary tests are mandatory. WR 1 Cleaner
Page 2/3
Marabu GmbH & Co. KG • Phone +49 7141 6910 • info@marabu-inks.com • www.marabu-inks.com
Technical Data Sheet
It is recommended to use Cleaner WR 1 for 15–25 °C, the shelf life of the unopened ink
cleaning the working equipment, or alternative- container is 1.5 years. Under different condi- Vers. 4
ly Cleaner PLR or UR 3. tions, particularly differing storage tempera- 2021
tures, the shelf life is reduced. In such cases, the 13. Apr
warranty given by Marabu expires.
Printing Parameters
Note
Clichés
All commercially available clichés made of ce- Our technical advice whether spoken, written,
ramic, photopolymer, thin steel (springsteel or through test trials corresponds to our cur-
quality), and chemically hardened steel (10 rent knowledge to inform about our products
mm) can be used. The recommended cliché and their use. This is not meant as an assurance
depth is 20-35 µm. A fundamental require- for certain properties of the products nor their
ment is the absolute flatness of the base plate suitability for each application.
when using photopolymer or thin steel clichés. You are, therefore, obliged to conduct your
In general, all cliché types must be screened. own tests with our supplied products to con-
Photopolymer clichés should be re-exposed firm their suitability for the desired process or
with a 120 l/cm halftone with a density of ap- purpose. The foregoing information is based on
prox. 85 %. For thin steel or steel clichés, an 80 our experience and should not be used for spec-
l/cm halftone should be chosen if technically ification purposes. All characteristics described
possible. in this Technical Data Sheet refer exclusively to
the standard products listed under "Range",
Printing pads provided that they are processed in accordance
Experience has shown that best results are ach- with their intended use and only when used
ieved with dry or super dry printing pads with with the recommended auxiliaries. The selec-
a minimum of 8 shore. The pads should be tion and testing of the ink for specific applica-
made of materials cross-linked by condensa- tions is exclusively your responsibility. Should,
tion or addition. The steeper the form of the however, any liability claims arise, they shall be
tampon, the better the printing result. limited to the value of the goods delivered by
us and utilised by you with respect to any and
Printing machines all damages not caused intentionally or by gross
Maqua® Pad MAP is suited for closed ink cup negligence.
systems. As for solvent-based ink types, auxil-
iaries can be added during longer print runs in Labelling
order to control the ink’s viscosity. For Maqua® Pad MAP and its auxiliaries, there
are current Material Safety Data Sheets availa-
Printing conditions ble according to EC regulation 1907/2006, in-
Air humidity must not be lower than 40 % r. F. forming in detail about all relevant safety data
and should be regulated with an air humidify- including labelling according to EC regulation
Marabu
ing system. For best results, the room tempera- 1272/2008 (CLP regulation). Such health and
ture must be maintained at 20-25°C. safety data may also be derived from the respec-
tive label.
Shelf Life
Water-based products typically contain isothia-
zolinone biocides, including methyl isothiazoli-
Maqua® Pad MAP is a water-based ink system none, as in-can preservatives. Such biocides
and in order to avoid frost damages, it should may cause allergic skin reactions in already sen-
under no circumstances (not even shortly) be sitised individuals.
exposed to temperatures lower than 5 °C dur-
ing transport and storage.
If permanently stored at a temperature range of
Page 3/3
Marabu GmbH & Co. KG • Phone +49 7141 6910 • info@marabu-inks.com • www.marabu-inks.com