Professional Documents
Culture Documents
LOCTITE® 401™
(TDS for new formulation of Loctite® 401™) February-2012
% Initial Strength @ 22 °C
Tensile Strength, ISO 6922:
Buna-N N/mm² ≥6.9LMS 100
(psi) (≥1,000)
100 °C
75
Cured for 72 hours @ 22 °C 80 °C
Tensile Strength, ISO 6922:
Buna-N N/mm² 13.7 50
120 °C
(psi) (1,900)
25
Lap Shear Strength, ISO 4587:
Steel (grit blasted) N/mm² 20
(psi) (2,900) 0
Aluminum (etched) N/mm² 12.4 0 250 500 750 1000
(psi) (1,800) Exposure Time, hours
Zinc dichromate N/mm² 2.5
(psi) (360) Chemical/Solvent Resistance
ABS * N/mm² 7.5 Aged under conditions indicated and tested @ 22 °C
* (psi) (1,090) % of initial strength
PVC * N/mm² 10
Environment °C 100 h 500 h 1000 h
* (psi) (1,450)
Phenolic * N/mm² 12.6 Motor oil 40 115 85 85
* (psi) (1,820) Unleaded gasoline 22 85 90 95
Polycarbonate * N/mm² 9.6 Water 22 75 80 75
* (psi) (1,400)
Water/glycol 22 85 75 65
Nitrile * N/mm² 1.2
* (psi) (170) Ethanol 22 100 110 130
Neoprene * N/mm² 1.1 Isopropanol 22 115 100 120
* (psi) (160)
98% RH 40 80 65 65
Block Shear Strength, ISO 13445:
Polycarbonate N/mm² 11 Chemical/Solvent Resistance
(psi) (1,600) Aged under conditions indicated and tested @ 22°C.
ABS * N/mm² 23 Lap Shear Strength, ISO 4587, Polycarbonate
* (psi) (3,340)
PVC N/mm² 2.6
(psi) (380) % of initial strength
Phenolic * N/mm² 21.3 Environment °C 100 h 500 h 1000 h
* (psi) (3,090)
Air 22 110 120 115
* substrate failure 98% RH 40 110 120 105
GENERAL INFORMATION
TYPICAL ENVIRONMENTAL RESISTANCE This product is not recommended for use in pure oxygen
Cured for 1 week @ 22 °C and/or oxygen rich systems and should not be selected as
Lap Shear Strength, ISO 4587: a sealant for chlorine or other strong oxidizing materials.
Steel (grit blasted)
For safe handling information on this product, consult the
Safety Data Sheet (SDS).
Hot Strength
Tested at temperature
140
Directions for use:
120
% Strength @ 22 °C
Reference 2.6