Professional Documents
Culture Documents
24
CERAMIC
FILTER
(CERAFIL®)
Murata
Manufacturing Co., Ltd.
Cat.No.P10E-4
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
!CONTENTS INTRODUCTION
Worldwide, AM is used more than any other broadcasting form.
!SFU/SFZ Series 450 - 470kHz ................................... 1 - 2 There are three versions of this broadcasting ... long waves
!High Selectivity Ladder Type (LW), medium waves (MW), and short waves (SW).
SFPS/CFWS Series 450 - 470kHz ............................. 3 - 4 Broadcasting stations send signals at intervals of 9 kHz for
!Wide band Type for AM Stereo LW, 9 or 10 kHz for MW,and 5 kHz for SW. Radio waves travel
SF-/CF-450 Series ................................................... 5 - 6 long distances before they reach receivers ; thus,the primary
!Ultra-small PF- Series 450 - 470kHz ........................ 7 - 8 requirement for receivers is to have high selectivity. This is
!High Selectivity SMD Ladder Type possible only with the help of the high grade intermediate
SFPC Series ..................................................................... 9 frequency filter. Murata's CERAFIL® for AM use is one of the
!Two terminals Resonance Type Series most recommendable IF filters, having such distinctive features
450 - 470kHz .................................................................. 10 as : high selectivity, high stability and adjustment-free
!SF-/PF-/BF-Series Temperature .............................. 11 operation.
!SF-/PF-/BF-Series Application ................................. 12 Additionally its easy matching with IC helps create an easy
!SF-/PF-/BF-Series Application/Notice ...................... 13 circuit design. We have long enjoyed a reputation as one of the
best AM receiver component suppliers around the world.
On the other band, technology of AM receiver has been
outstandingly improved as follows.
"Electric synthesized tuners
"Hi-Fi audio systems
"AM stereo demodulations
"One-chip non-adjustment IC's
"Even smaller, thinner set structure
To cope with these diversifying AM receiver, Murata's
CERAFILS® for AM use are available for every type of AM
receiver.
2
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
!SPECIFICATION
3dB Band Selectivity Insertion
Part Loss Compo-
Number
Width W9kHz off Y9kHz off sition
(kHz) (dB) min. (dB) min. (dB) max.
4.0T0.5
3.5T0.3
" For synthesizers, the types of center frequencies 450, 459 and
468 kHz are available. Standard tolerance is T1 kHz.
MARKING
9.0T0.3
MARKING 9.0T0.3
" The part numbers of the types for synthesizers are as follows. (In
EIAJ EIAJ
case of 450kHz) CODE CODE
3.5 1.75
1.75
(Bottom view)
No-load Qu 105 90
Tuning Capacitance 180pF 180pF
" Matching of CERAFIL® SFU/SFZ series with IFT is decided by the
IFT secondary side impedance, |Z2|.The design target values of
|Z2| are :
For SFU-B : 300Ω
For SFZ-HL/JL/KL : 1kΩ
1
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
!TEST CIRCUIT
"Ceramic Filter Only "CERAFIL® with IFT
SFU-A/C5/B IFT+SFU-B
7pF
3kΩ (1) (3) (1) (3)
IFT
(2) 300kΩ (3) (4) (2)
S.S.G. RF S.S.G. (2) RF
3kΩ
3kΩ
SFZ-HL/JL/KL IFT+SFZ-HL/JL/KL
(3) (4) 7pF (3) (4)
(2) (5) (2) (5)
3kΩ
(1) (6) IFT (1) (6)
300kΩ (3) (4)
RF S.S.G. (2) RF
3kΩ
S.S.G.
3kΩ
0 0 0 0
10 10 10 10
Attennation (dB)
Attennation (dB)
Attennation (dB)
Attennation (dB)
20 20 20 20
30 30 30 30
40 40 40 40
50 50 50 50
60 60 60 60
70 70 70 70
435 445 455 465 475 435 445 455 465 475 435 445 455 465 475 435 445 455 465 475
Frequency (kHz) Frequency (kHz) Frequency (kHz) Frequency (kHz)
"Spurious Characteristics
IFT+SFU455B IFT+SFZ455HL
0 0
10 10
Attennation (dB)
Attennation (dB)
20 20
30 30
40 40
50 50
60 60
70 70
80 80
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
Frequency (MHz) Frequency (MHz)
2
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
!SPECIFICATION
6dB Band Selectivity Insertion Matching
Part Compo-
Number
Width T9kHz off Loss Impedance sition
(kHz) min. (dB) min. (dB) max. (kΩ)
T3.0 4 Elements
SFPS450H 40 (60) 6 (1.5) 2.0 Ladder Type
(T4.0)
T3.0 6 Elements
CFWS450HT 50 (75) 6 (2.0) 2.0 Ladder Type
(T4.0)
( ) : Typ. value SFPS450H CFWS450HT
" For synthesizers, the available center frequencies are 450, 459
and 468 kHz. Standard tolerance is T1 kHz.
" Because of excellent shape factor, wide-band width and high
selectivity, this series is the most suitable to car radios and all- !DIMENSIONS
band radios.
" SFPS 450I, designed for narrow band use, are also available. SFPS450H CFWS450HT
8.0T0.3 11.0T0.5
Please contact us for further information.
7.0T0.3
MARKING
7.0T0.5
MARKING
Type
3.0T0.3 7.0T0.3
3.5T0.5 7.5T0.5
0.3T0.1
1.5max.
SFPS/CFWS-H
Item 0.8T0.1 0.8T0.1
1.5max.
4.3T0.3
1.35T0.5
!TEST CIRCUIT
SFPS450H CFWS450HT
(3)
(5)
2kΩ (1) 2kΩ (1)
(2)
(2) (3) (4)
RF
2kΩ
RF
2kΩ
Volt meter
Volt meter
S.S.G. S.S.G.
(Rg=50Ω) (Rg=50Ω)
3
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
0 0
10 10
Attennation (dB)
Attennation (dB)
20 20
30 30
40 40
50 50
60 60
70 70
430 440 450 460 470 430 440 450 460 470
Frequency (kHz) Frequency (kHz)
"Spurious Characteristics
IFT+SFPS450H IFT+CFWS450HT
0 0
10 10
Attennation (dB)
Attennation (dB)
20 20
30 30
40 40
50 50
60 60
70 70
80 80
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
Frequency (kHz) Frequency (kHz)
4
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
!FEATURES
SFPS/CFWS Series :
wide band, high selectivity, low loss.
CFUS-Y/CFWS-Y Series :
wide band, flat group delay time (GDT) characteristics. (The
frequency fidelity in the high sound area of an AM stereo will
be improved.)
!DIMENSIONS
SFPS450G/F/D CFWS450G/F/D CFUS450GY/FY/DY CFWS450GY/FY/DY
8.0T0.3 11.0T0.5 8.0T0.3 11.0T0.5
7.0T0.5
MARKING 7.0T0.3
7.0T0.5
7.0T0.3
7.3T0.3
3.5T0.5 7.5T0.5
7.0T0.3
0.3T0.1
0.3T0.1
1.5max.
1.5max.
1.5max.
1.5max.
Connection
4.2T0.3
4.3T0.3
Connection Connection
1.35T0.5
1.35T0.5
!SPECIFICATION
6dB Band Width Insertion Loss G. D. T. 20µ Matching
Part Number Selectivity (dB) min. Composition
(kHz) min. (dB) max. Band width (kHz) Impedance (kΩ)
SFPS450G T4.5 (T5.0) T9kHz off2.5 30 (40) 6 (2) Y 2 4 Elements ladder type
SFPS450F T6 (T7.5) T12.5kHz off 40 (50) 6 (1.5) Y 2 4 Elements ladder type
SFPS450D T10 (T12) T20kHz off2. 40 (50) 4 (1.5) Y 1.5 4 Elements ladder type
CFWS450G T4.5 (T5.5) T9kHz off2.5 40 (55) 6 (2.5) Y 2 6 Elements ladder type
CFWS450F T6 (T7.5) T12.5kHz off 50 (70) 6 (2) Y 2 6 Elements ladder type
CFWS450D T10 (T12) T20kHz off2. 50 (70) 6 (2) Y 1.5 6 Elements ladder type
CFUS450GY T4.5 (T5.5) T15kHz off2. 40 (50) 10 (7) (T4.5) 2 4 Elements ladder type
CFUS450FY T6 (T7.5) T17.5kHz off 40 (50) 9 (5.5) (T6) 2 4 Elements ladder type
CFUS450DY T10 (T12) T25kHz off2. 40 (50) 7 (4) (T9) 1.5 4 Elements ladder type
CFWS450GY T4.5 (T5.5) T15kHz off2. 50 (70) 11 (8) (T4) 2 6 Elements ladder type
CFWS450FY T6 (T7.5) T17.5kHz off 50 (70) 10 (6.5) (T5) 2 6 Elements ladder type
CFWS450DY T10 (T12) T25kHz off2. 50 (70) 8 (5) (T8) 1.5 6 Elements ladder type
( ) : Typ. value
" The standard center frequency (f0) tolerance is T1 kHz.
" The recommended IFT specifications are the same as those for the SFPS 450 H/CFWS 450 HT. Set the Qu at approximately 40. If Qu is too
high, ripple will be produced in the waveform, which will narrow the band width.
" Products with other band widths are also available :
5
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
0 0
10 10
Attennation (dB)
Attennation (dB)
20 20
30 30
40 40
50 50
60 60
70 70
430 440 450 460 470 430 440 450 460 470
Frequency (kHz) Frequency (kHz)
IFT+CFUS450FY IFT+CFWS450FY
0 0
Group Delay Time (µsec.)
10
Attennation (dB)
20 200 20 200
30 100 30 100
40 0 40 0
50 50
60 60
70 70
430 440 450 460 470 430 440 450 460 470
Frequency (kHz) Frequency (kHz)
6
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
!SPECIFICATION
Part 3dB Band Selectivity Insertion
Width T9kHz off Loss Composition
Number (kHz) (dB) min. (dB) max.
PFS455A 4.5T1.5 8 (11) 5 (2.5) 1 Element
PFW455J 5.5T1.5 17 (23) 6 (3) 2 Element
PFWCC450J 5.5T1.5 17 (23) 6 (3) 2 Elements SMD
( ) : Typ. value
PFS455A PFW455J PFWCC450J
" Center frequency is available between 450 and 470 kHz .
Standard tolerance is T2kHz.
" For synthesizers, the types of center frequencies 450, 459 and
468 kHz are available. Standard tolerance is T1 kHz.
" PFS/PFW series available on tape. ("-TF01" is added to the part !DIMENSIONS
number for tape. ex. PFS455A-TF01)
PFS455A PFW455J
" PFWCC series is mountable by automatic placers. ("-TC" is
6.0T1.0 6.0T1.0
added to the part number for tape reel. ex. PFWCC450J-TC)
55 J
55 A
6.2max.
5.0T1.0
!THE RECOMMENDED IFT * *
5.0T1.0
1.4T0.1
Item 0.5T0.1
0.5T0.1
Winding specifications (1) - (2) (2) - (3) (4) - (6) (1) - (2) (2) - (3) (4) - (6)
0.3T1.0
0.3T1.0
2.5 2.5 2.5 2.5
S(3) (4)S T0.2 T0.2 T0.2 T0.2
Connection
3.0T1.0
3.0T1.0
(2) (3)
" The matching of CERAFIL® PF - series with the IFT is
5.0T0.3
55J
1.5T0.2
(1) Input
(2) Output
(3) Ground
(4) Ground
(in mm)
!TEST CIRCUIT
"Ceramic Filter Only "CERAFIL® with IFT
PFS/PFB PFS/PFB 7pF
3kΩ (1) (3) (1) (3)
IFT
(2) 300kΩ (3) (4) (2)
S.S.G. RF S.S.G. (2) RF
3kΩ
3kΩ
7
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
!FREQUENCY CHARACTERISTICS
"Frequency Characteristics
Attenuation (dB)
Attenuation (dB)
20 20 20
30 30 30
40 40 40
50 50 50
60 60 60
70 70 70
435 445 455 465 475 435 445 455 465 475 430 440 450 460 470
Frequency (kHz) Frequency (kHz) Frequency (kHz)
"Spurious Characteristics
0 0 0
10 10 10
Attenuation (dB)
Attenuation (dB)
Attenuation (dB)
20 20 20
30 30 30
40 40 40
50 50 50
60 60 60
70 70 70
0.000 1.000 2.000 3.000 4.000 0.000 1.000 2.000 3.000 4.000 0.000 1.000 2.000 3.000 4.000
Frequency (kHz) Frequency (kHz) Frequency (kHz)
!TAPING DIMENSIONS
Item Code Dimensions (mm) Note
PFS/PFW--TF01
Portion to Cut Case of Defect L1 3 min.
∆h ∆h Pitch of Component P 12.7T0.5
P2 P
Pitch of Sprocket Hole P0 12.7T0.2
Length from Hole Center to Lead P1 3.85T0.5
∆S1
Length from Hole Center to
P2 6.35T0.5
Component Center
W2
+0.5
Lead Spacing (1) F 5.0T0.5
- 0.2
H0
L1
W0
PFWCC--TC
1.75T0.1
2.0T0.1 4.0T0.1
φ1.55-01
5.5T0.1
12.0T0.3
6.1T0.1
50J
50J
50J
20 - 60gr
(0.07)
3˚m
Cover Tape
0.3
ax.
10˚
8
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
!SPECIFICATION
6dB Band Selectivity Insertion Matching
Part Compo-
Width T9kHz off Loss Impedance
Number sition
(kHz) min. (dB) max. (dB) min. (kΩ)
T3.0 40 6 4 Elements,
SFPC450H 2.0
(4.0) (60) (1.5) SMD
" Mountable by automatic placers.
("-TC" is added to the part number for tape and reel. ex. SFPC
450 H-TC) SFPC450H
" SFPC 450F/SFPC450G,designed for wide band use, are also
available. Please contact us for further information.
!DIMENSIONS
!TEST CIRCUIT
SFPC450H 7.0T0.3
3.0T0.3
8.4max.
7.5T0.3
2kΩ (1) (3) MARKING
EIAJ
(2) CODE
S.S.G. RF 0.9T0.1
2kΩ
5.0max.
1.5T0.3 2.0T0.3 2.0T0.3 1.5T0.3 1.6T0.3
Connection
(1) (2) (3)
(1) Input
(2) Ground
!DIMENSIONS OF PLASTIC TAPE (3) Output
(in mm)
1.75T0.1
4.0T0.1
2.0T0.1
φ1.5W0.1
Y0.0
6.75T0.1 7.5T0.1
16.0T0.2
9.2T0.1
8.8T0.1
12.0T0.1 5.7T0.1
Direction of feed
Cover tape
7.4T0.1
(in mm)
9
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
!SPECIFICATION
Characteristics Resonant fa-fr Resonant Capacitance
Part Number Frequency (kHz) (kHz) Resistance (Ω) max. (pF)
!IMPEDANCE CHARACTERISTICS
3.5T0.3
7.0T0.3
BFU450C4N 100K
9.0T0.3
50K MARKING
1.5max.
EIAJ
10K CODE
5K
3.5T0.5
0.8T0.1
Impedance (Ω)
1K 1.1T0.1
1.75T0.5
500
0.25T0.05
0.1T0.05
5.0T0.2
100
50 No directivity (in mm)
10
5
1
440 450 460 470
Frequency (kHz)
!APPLICATION CIRCUIT
"BFU450K3 in Tr Circuit "BFU450C4N IN LA1135 (for SD)
CF2 BFU450C4N
Station Det. Out Vcc (+8V)
100µ
+
7.5k
82
100k 430p
V tune 10k 2.7k
AF Out
+
4.7µ
3.3µ
0.033µ
10k
0.047µ
0.047µ
+6V
+ 0.01µ
3k
15k
0.01µ 0.47µ
0.01µ 3k 20 19 18 17 16 15 14 13 12 11
100
µPC1216V2 (NEC)
RF
1k
S.S.G. 1 2 3 4 5 6 7 8 9 10
5k
+
0.022µ
0.022µ
0.022µ
0.022µ
1µ
Volt
1mA
(10mV) BFU
47µ
ANT.
450K3 meter
0.022µ
0.022µ
22µ
75
CF1
0.047µZ2 100µH
100k
51
3.3mH
100k
0.022µ
SFZ450JL3
SFPS450H
10
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
!TEMPERATURE CHARACTERISTICS
SFZ455JL SFPS450H
Center Frequency
Center Frequency
(kHz)
40 60 -20 0 20 40 80
(kHz)
20 80
0 0
-20 0
-1 -1
+1 +1
Insertion Los
Insertion Los
20 40 0 20 40
(dB)
(dB)
0 0
-20 0 60 80 -20 60 80
Temperature (D) Temperature (D)
-1 -1
+1 Temperature (D)
20 40 60 80
(kHz)
20 40 60 80
(kHz)
0 0
-20 0 -20 0
-1 -1
PFW455J
Center Frequency
+1
(kHz)
20 40 60 80
0
-20 0
-1
Temperature (D)
+1
Insertion Los
40 60
(dB)
0
-20 0 20 80
-1 Temperature (D)
3dB Band Width
+1
(kHz)
-20
0
0 20 40 60 80
-1 Temperature (D)
11
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
!APPLICATION CIRCUIT
"Car Radio (SFPS450H/BFU450C4N) "Car Radio (SFZ455JL3/SFU455A3)
BFU450C4N
Station Det. Out Vcc (+8V)
100µ
7.5k
82
Ant
100k 430p Input
V tune 10k 2.7k 120
+ AF Out 4.7µH
4.7µ
3.3µ
0.033µ
10k
22µ
220p
4.7µ
SFU455A3
51p
0.047µ
0.033µ
0.047µ
2200p
10µ
33p
+ 0.01µ
3k
100p 0.01µ
0.47µ
20 19 18 17 16 15 14 13 12 11 2 4 6 8 10 12 14 16 18
µPC1216V2 (NEC)
100
µPC1216V2 (NEC)
1 2 3 4 5 6 7 8 9 10 1 3 5 7 9 11 13 15 17 19
+ 1µ
0.022µ
0.022µ
0.022µ
0.022µ
1µ
Det.
+
47µ
0.022µ
560p
3300p
4.7K
22µ
22µ
3.3µ
10k
100µ
0.022µ
0.022µ
22µ
75
SFPS450H
0.047µZ2 100µH SFZ455JL3 100 Vcc
100k
51
(+13V)
3.3mH
2SK315
100k
100k
0.022µ
FM PF FM OSC
+
R FM/AM
IF FM IF + BAND SELECT
OUT IN
9 7 6 14 17 2 19 25 26 15
FM DISCRI METER REG
Vcc
FM FM IF OUT
FM TUNING RIPPLE 8
12 FRONT AMP REGULATOR +
BPF END DETECTOR METER FILTER
28
AM ANT 13
1
CXA1019M (SONY)
AM AM IF AF
10 FRONT AMP VOL PRE/POWER 27
END DETECTOR AMP + SP
AGC
AM IF AMP
IN AF IN
11 18 20 16 22 23 21 4 24 3
DEP +
AM OSC OUT
+ +
+
AM CERAFIL®
(SFU455B) VOL
12
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
CERAMIC FILTER
CERAFIL® is the Registered Trademark
of Murata Manufacturing Co., Ltd.
CSB
456F16
100k
8p
L3 L1 L2 T1 ST FM
330p
0.1µ
20p
22p
33k
0.015µ
5p
22k
0.015µ
+
4.7µ
10µF -
+ L
0.1µ
MO AM + -
15p + - -
FM + -
FM AM DEF R
AM PF OUT Vcc1 MPX LPF1 LPF2 VCO OUT OUT 4.7µ
OSC OSC OUT IN L R
PF IN
24 23 22 21 20 19 18 17 16 15 14 13
AM AM AM AM/FM Freq
RF MIX DET MONO SW Divider HYS SW
FM AM AM AM L FM FM TUN ST
RF MIX AGC IF DET IF DET LED LED
FM
1 2 FM
3 AM
4 AM
5 6 7 8 9 10 11 12
AM FM
RF IN GND1 MIX MIX AGC Vcc2 IF IN IF IN TUN ST
GND2
+ LED LED QUAD
33µ
BPF 0.033µ
-
T2
560
560
Vcc
10µH + (3V)
0.022µ
22µ
SFU455B SFE10.7MA5Z2 CDA
10.7MG16 -
!NOTICE
" Matching condition should be evaluated to perform stable
electrical characteristics which are specified.
" In case of covering filter with over coat, conditions, such
as material of resin, cure temperature and so on should
be evaluated well.
" Washing of filter is not acceptable due to unsealed
construction.
" Filter might be damaged when an excess stress was
applied.
13
This is the PDF file of catalog No.P10E-4. No.P10E4.pdf 99.5.24
Note:
1. Export Control
< For customers outside Japan >
Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.
< For customers in Japan >
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using our products listed in this catalog for the applications listed below which require
especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property, or when intending to use one
of our products for other applications than specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
r Medical equipment
t Transportation equipment (vehicles, trains, ships,etc.)
y Traffic signal equipment
u Disaster prevention / crime prevention equipment
i Data-processing equipment
o Application of similar complexity and/or reliability requirements to the applications listed in the above
3. Product specifications in this catalog are as of May 1999. They are subject to change or our products in it may be discontinued without advance notice. Please
check with our sales representatives or product engineers before your ordering. If there are any questions, please contact our sales representatives or product
engineers.
4. The parts numbers and specifications listed in this catalog are for information only. You are requested to approve our product specification or to transact the
approval sheet for product specification, before your ordering.
5. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
6. None of ozone depleting substances (ODS) under the Montreal Protocol is used in manufacturing process of us.
http://www.murata.co.jp/products/
Head Office International Division
2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone:81-75-955-6502 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone:81-3-5469-6123 Fax:81-3-5469-6155 E-mail:intl@murata.co.jp