Professional Documents
Culture Documents
E-TEST 2
SEMESTER 2 SESI AKADEMIK 2020-2021
SEMESTER 2 ACADEMIC SESSION 2020-2021
Kertas soalan ini mengandungi 5 muka surat bercetak, tidak termasuk muka surat ini.
This question paper consists of 5 printed pages, excluding this page.
No. Pendaftaran: ____________________
1. (a) Namakan DUA (2) operasi unit yang mengendalikan / memproses zarah
pepejal, dan menerangkan prosesnya.
Name TWO (2) unit operations that handle/process solid particles, and
describe the process. (5 markah)
2. (a) Komposit diperkuat gentian fiber dihasilkan daripada 30 vol% silikon karbida
dan 70 vol% matriks polikarbonat; ciri mekanikal kedua-dua bahan ini adalah
seperti di JADUAL Q2.
The stress on the polycarbonate matrix when the silicon carbide fail is 45
MPa. For this composite, compute:
(b) Penguat serat yang paling biasa dimasukkan dalam matriks polimer adalah
kaca, karbon, dan aramid. Berikan DUA (2) sebab mengapa komposit
bertetulang gentian karbon digunakan secara meluas.
The most common fiber reinforcements incorporated in polymer matrices are
glass, carbon, and the aramids. Give TWO (2) reasons why carbon fiber-
reinforced composites are used extensively.
(5 markah)
(c) Nyatakan DUA (2) produk yang diperbuat dari komposit bertetulang gentian
kaca.
Name TWO (2) products which could be made from glass fiber-reinforced
composites.
(5 markah)
Polycarbonate lenses have become the standard for safety glasses, sports
goggles and children's eyewear. In lens manufacturing, a process called
injection molding is commonly used. Briefly describe the process. (10 markah)
3. (a) Keluli tahan karat lebih dipilih dalam proses biologi untuk mengurangkan
pencemaran oleh produk kakisan. Cadangkan DUA (2) kaedah pencegahan
kakisan yang lain.
Stainless steels are preferred in biological processes to reduce contamination
by corrosion products. Propose the other TWO (2) possible corrosion
prevention methods. (5 markah)
(c) Sebagai seorang bakal jurutera, anda akan menghadapi dilema antara
menyeimbangkan perbelanjaan modal dan pemilihan bahan alatan yang
optimum untuk proses dan produk yang berkualiti. Bincangkan pendekatan
yang mungkin akan anda buat.
As a future engineer, you will be facing dilemma in balancing capital
expenditure and optimum equipment material selection for efficient process and
product quality. Discuss the possible approach you will make.
(5 markah)