Professional Documents
Culture Documents
KKKR4744 Exam 3
KKKR4744 Exam 3
EXAMINATION 3
SEMESTER I SESI AKADEMIK 2020-2021
SEMESTER I ACADEMIC SESSION 2020-2021
Set: ____________________
Kertas soalan ini mengandungi 2 muka surat bercetak, tidak termasuk muka surat ini.
This question paper consists of 2 printed pages, excluding this page.
Peperiksaan ini berdasarkan Projek Reka Bentuk Tahun Akhir (KKKR4852) anda. Skop
peperiksaan ini merangkumi usaha berpasukan dan juga usaha individu.
This examination is based on your Final Year Design Project (KKKR4852). The scope of this
exam covers both team effort as well as individual effort.
1. Tugasan berkumpulan:
Group tasks:
(a) Huraikan proses yang anda dan kumpulan anda rancang. Ini harus
merangkumi pemilihan proses, deskripsi proses, kapasiti pengeluaran, tapak
yang dicadangkan, penerangan sumber bahan mentah, produk utama dan
produk sampingan berserta gambar yang relevan (seperti keseimbangan jisim
dan tenaga, piping and instrumentation diagram (P&ID), rancangan plot dan
lokasi tapak). (10 markah)
Describe the process that you and your group are designing. This should
include the process selection, process description, production capacity,
proposed site, description on sources of raw materials, main products and
side products along with relevant drawings (such as mass and energy balance,
piping and instrumentation diagram (P&ID), plot plan and site location).
(10 marks)
(b) Kenal pasti bahan berbahaya yang berada dalam projek anda. Pengenalpastian
bahaya hendaklah merangkumi sifat berbahaya dan inventori pengencaman
bahan bahaya. (10 markah)
Identify the hazardous materials that having in your project. The hazard
identification shall cover the hazardous properties and inventory of the
hazardous materials. (10 marks)
(d) Bincangkan sistem bahaya berdasarkan proses dan lokasi yang dipilih
(20 markah)
Discuss the hazard system based on the selected process and location.
(20 marks)
2. Tugasan individu:
Individual tasks:
(a) Lakukan kajian hazard and operability study (HAZOP) mengenai peralatan
utama yang anda reka secara individu.
(25 markah)
1
KKKR4743
(b) Lakukan hazard identification, risk assessment and risk control (HIRARC)
pada peralatan utama yang anda reka. Berdasarkan hasil HIRARC, bincangkan
risiko projek tersebut. (25 markah)
Perform hazard identification, risk assessment and risk control (HIRARC) on
the major equipment that you are designing. Based on the HIRARC results,
discuss the risk of the project. (25 marks)
Nyatakan semua andaian anda dengan jelas dan lampirkan semua maklumat sokongan yang
relevan serta nyatakan tanggungjawab untuk setiap ahli pasukan.
States clearly all your assumptions and attached all relevant supporting information and
states the responsibility for each team member.
2
MS ISO 9001 REG NO. AR 2845