Professional Documents
Culture Documents
Ovation™ Remote
Node Interface
Module
Features
Provides a flexible, cost-effective means to
distribute Ovation™ I/O modules to strategic
locations throughout the plant
Secure and reliable 100 Mbps fast Ethernet
redundant communication with the Ovation
controller for mission-critical control applications
UTP or fiber connectivity options
Can be deployed in star or ring network
architecture
Provides “bumpless” automatic fail-over between
redundant remote node interfaces
Supports all Ovation I/O modules in remote
locations
Up to 16 remote node interfaces can be assigned
to a single controller
Redundant power supplies deliver system
reliability
Standardized LED status indicators, controller
diagnostics and system viewer provides pertinent
diagnostic information
Introduction
Emerson’s Ovation™ control technology is designed to The Ovation remote node interface, available in
support long-term process reliability and expandability. Ovation 3.6 systems and above, communicates to
With modular plug-in components, Ovation I/O delivers the Ovation controller through a 100 Mbps Ethernet
embedded advanced control applications with built-in protocol.
fault tolerance and system diagnostics.
Page - 1
PWS_009935 [3]
Ovation™ Remote Node Interface Module Data Sheet
Page - 2
PWS_009935 [3]
Ovation™ Remote Node Interface Module Data Sheet
Supported network topology Star/tree and ring architecture using DIN rail mounted remote I/O network switches
G01: 100 meter using UTP cable; more than 2 Km with single mode fiber cable
Distance & and SFP/media converters
G02: 2 Km using multimode fiber optic cable
Redundancy Redundancy support using two remote node interface modules
64 Ovation I/O modules per remote node interface (8 branches with 8 modules per
Capacity
branch)
Each controller supports up to 16 remote node interface modules using DIN rail
Controller support
mounted remote I/O network switches
G01: 5.4 W typ., 6.0 W max @ 24 V DC
Power
G02: 5.9 W typ., 6.5 W max @ 24 V DC
Safety
Low Voltage Directive, 2006/95/EC EN 61131-2: Programmable controllers, Part 2 Equipment requirements and tests
for CE Mark certification (Pollution degree 2, Installation Category II)
Page - 3
PWS_009935 [3]
Ovation™ Remote Node Interface Module Data Sheet
LED - E (red) External error: Ovation controller is not communicating with the module
Electromagnetic Capability
The Ovation remote node interface modules meet electromagnetic compatibility requirements as per EMC Directive
EMC/104/EC. It meets the following international standards for CE Mark compliance.
CISPR 11 / EN55011: Meets the requirements of the Competent Body for CE Mark
Emissions
approval
Electrostatic Discharge Immunity EN61000-4-2: (4 kV contact, 8 kV air discharge). Meets the requirements for CE
Test (at the cabinet) Mark approval – Criteria B
EN61000-4-3: 80 MHz to 1000 MHz carrier wave field strength of 3 V rms/m with
Radiated, Radio-frequency,
sinusoidal amplitude modulation of 1 kHz @ 80% modulation depth.
Electromagnetic Field Immunity Test
Meets the requirements for CE Mark approval – Criteria A
Electrical Fast Transient/Burst
Not applicable
Immunity Test
Surge Immunity Test Not applicable
Immunity to Conducted Disturbances
Not applicable
Induced by Radio-Frequency Fields
EN 61000-4-11: Meets the requirements of the Competent Body for CE Mark
Voltage Dips and Interruptions
approval – Criteria A
Environmental
Temperature 0 ºC – 60 ºC
©2017-2018 Emerson. All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Co. Ovation™ is a mark of one of the Emerson Automation Solutions
family of business units. All other marks are the property of their respective owners. The contents of this publication are presented for information purposes only, and while effort has been
made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or
applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at
any time without notice.
Page - 4
PWS_009935 [3]