1. Do you use tension rods for the diagonal brace for the roof and sides?
If not, what section do you use?
2. I noticed on the CDC plans that the type of bolt was not specified. Do you use A307, A325 or GI 8.8, or do you have other kinds of bolt? 3. Also for the weld, is it common for you to use Electrode E60xx or E70xx? If not, which electrodes do you use? 4. Do you also have a geotechnical report reference that I can use in designing the footing of the boat port?
7am to 4 or 5pm
Importance level – 2
Deeper block
Landgate –
Camera icon, buy aerial photo, dropdown box, little bit of idea for the terrain,