Professional Documents
Culture Documents
CONTENTS
Alarm Systems
Chapter 20.1
DESCRIPTION................................................................................... 20.1-1
BASIC ALARM SYSTEM INTERCONNECTION DIAGRAMS . 20.1-2
Basic Alarm System - Without Alarm Status................................. 20.1-2
Basic Alarm System - With Alarm Status...................................... 20.1-3
ENHANCED ALARM SYSTEM INTERCONNECTION
DIAGRAMS ..................................................................................... 20.1-4
Enhanced Alarm System - Without Status ..................................... 20.1-4
Enhanced Alarm System - With Alarm Status............................... 20.1-5
Enhanced Alarm System for Medium/High
Security Interconnection Diagram ................................................. 20.1-6
CONNECTOR ASSIGNMENT........................................................20.1-13
ALARM TERMINATION PANEL - BASIC
WITHOUT STATUS ......................................................................20.1-13
Silent Alarm Connector, J1...........................................................20.1-13
Door Switch Connector, J2...........................................................20.1-13
Alarm Output Connector, J3.........................................................20.1-13
Vibration Sensor Connector, J4 ...................................................20.1-14
ALARM TERMINATION PANEL - BASIC WITH STATUS .....20.1-14
Silent Alarm Connector, J1...........................................................20.1-14
Door Switch Connector, J2...........................................................20.1-14
Alarm Output Connector, J3.........................................................20.1-15
Vibration Sensor Connector, J4 ....................................................20.1-15
ALARM TERMINATION PANEL - ENHANCED
WITHOUT STATUS ......................................................................20.1-16
Silent Alarm Connector, J1...........................................................20.1-16
Door Switch Connector, J2...........................................................20.1-16
Alarm Output Connector, J3.........................................................20.1-16
Composite Attack Connector, J4 ..................................................20.1-17
ALARM TERMINATION PANEL - ENHANCED
WITH STATUS ..............................................................................20.1-17
Silent Alarm Connector, J1...........................................................20.1-17
Door Switch Connector, J2...........................................................20.1-17
Alarm Output Connector, J3.........................................................20.1-18
Composite Attack Connector, J4 ..................................................20.1-18
I/O PANEL ALARM OUTPUT CONNECTOR............................20.1-19
CONTENTS
Chapter 20.1
Alarm Systems
DESCRIPTION
The alarm system provides an interface between a series of alarm
sensors and an external environment, such as a Bank’s existing
alarm scheme.
There are three types of alarm systems:
z Basic
z Enhanced
z Enhanced for medium/high security.
For the first two systems there is a further option of status
reporting. This feature reports the status of the alarm signals to the
ATM application program. The enhanced alarm system for medium/
high security is supplied with status reporting as standard.
A silent alarm, operated by a special combination lock, is an
option with the basic and enhanced systems.
If the silent alarm is not fitted, the following turnaround plug
(NCR part number 445-0591539) will be installed in connector J1
on the alarm termination panel:
z 1 x 009-0006439, connector 2 x 3 plug
z 2 x 009-0006427, terminal #18 (female)
z 50 mm x 006-5830020, wire #18 white.
6 5 4
3 2 1
NOTE: * Fitted with the turnaround plug if the silent alarm is not
present.
NOTE: * Fitted with the turnaround plug if the silent alarm is not
present.
NCR — CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
JUNE 2008 20.1-3
ALARM SYSTEMS
NOTE: *Fitted with the turnaround plug if the silent alarm is not
present.
NOTE: * Fitted with the turnaround plug if the silent alarm is not
present.
NCR — CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
JUNE 2008 20.1-5
ALARM SYSTEMS
STRAPPING
None.
TEST TOOLS
A spring gauge (Chatillon, NCR part number 603-9000057 or an
equivalent) is required for the vibration detector adjustment
procedure.
ADJUSTMENTS
The vibration detector will normally be adjusted for optimum
performance by the representative of the alarm company
responsible for connecting the ATM to a local alarm system (they
have the expertise and local knowledge to adjust the unit for a
particular site). For test purposes, however, NCR presets the unit to
an initial adjustment as follows:
INTERNAL CABLES
+ 12V_RTN
+ 12V_RTN
Terminal
strip
2
9
Seismic Detector 009-0010985
3
7
14
11
10
1
15
009-0010986
Terminal
strip
2
9
009-0010986
Terminal
strip
2
9
Seismic Detector 009-0022984
15
14
11
10
009-0010986
TROUBLESHOOTING INFO
None.
CONNECTOR ASSIGNMENT
N/C 4 1 N/C
SAL_CM 5 2 N/C
SAL_NO 6 3 SAL_NC
DAL_CM 3 1 N/C
DAL_NC 4 2 DAL_NO
N/C 1 2 DAL_NO
N/C 3 4 DAL_CM
N/C 5 6 DAL_NC
N/C 7 8 SAL_NO
N/C 9 10 SAL_CM
N/C 11 12 SAL_NC
N/C 13 14 CAL_NC
N/C 15 16 CAL_CM
N/C 17 18 N/C
N/C 19 20 N/C
N/C 21 22 N/C
N/C 23 24 N/C
N/C 25 26 N/C
N/C 27 28 N/C
N/C 29 30 N/C
N/C 1 2 N/C
N/C 3 4 N/C
N/C 5 6 N/C
N/C 7 8 N/C
N/C 9 10 N/C
VIB+HEAT 11 12 N/C
N/C 13 14 N/C
N/C 15 16 CAL_CM
N/C 4 1 N/C
+12V 5 2 N/C
N/C 6 3 SREL
+12V 3 1 N/C
DREL 4 2 N/C
TAL_NC 1 2 DAL_NO
TAL_CM 3 4 DAL_CM
N/C 5 6 DAL_NC
N/C 7 8 SAL_NO
N/C 9 10 SAL_CM
N/C 11 12 SAL_NC
N/C 13 14 CAL_NC
CSTS_CM 15 16 CAL_CM
DSTS_CM 17 18 CAL_NO
SSTS_CM 19 20 CSTS_NC
TSTS_CM 21 22 DSTS_NC
N/C 23 24 SSTS_NC
N/C 25 26 TSTS_NC
N/C 27 28 +12V
GND 29 30 N/C
N/C 1 2 N/C
N/C 3 4 N/C
N/C 5 6 N/C
N/C 7 8 N/C
N/C 9 10 N/C
VIB 11 12 N/C
N/C 13 14 N/C
N/C 15 16 GND
N/C 4 1 N/C
SAL_CM 5 2 N/C
SAL_NO 6 3 SAL_NC
DAL_CM 3 1 N/C
DAL_NC 4 2 DAL_NO
TAL_NC 1 2 DAL_NO
TAL_CM 3 4 DAL_CM
TAL_NO 5 6 DAL_NC
TAL_OUT 7 8 SAL_NO
TAL_IN 9 10 SAL_CM
N/C 11 12 SAL_NC
N/C 13 14 CAL_NC
CSTS_CM 15 16 CAL_CM
DSTS_CM 17 18 CAL_NO
SSTS_CM 19 20 CSTS_CN
TSTS_CM 21 22 DSTS_CN
CTST_OP 23 24 SSTS_NC
CTST_OUT 25 26 TSTS_NC
CTST_IN 27 28 +12V
GND 29 30 N/C
N/C 1 2 +12V
N/C 3 4 N/C
N/C 5 6 CTST_OP
N/C 7 8 CTST_OUT
N/C 9 10 CTST_IN
N/C 11 12 CAL_NC
TAL_OUT 13 14 N/C
TAL_CM 15 16 GND
N/C 4 1 N/C
+12V 5 2 N/C
N/C 6 3 SREL
+12V 3 1 N/C
DREL 4 2 N/C
TAL_NC 1 2 DAL_NO
TAL_CM 3 4 DAL_CM
TAL_NO 5 6 DAL_NC
TAL_OUT 7 8 SAL_NO
TAL_IN 9 10 SAL_CM
N/C 11 12 SAL_NC
N/C 13 14 CAL_NC
CSTS_CM 15 16 CAL_CM
DSTS_CM 17 18 CAL_NO
SSTS_CM 19 20 CSTS_NC
TSTS_CM 21 22 DSTS_NC
CTST_OP 23 24 SSTS_NC
CTST_OUT 25 26 TSTS_NC
CTST_IN 27 28 +12V
GND 29 30 N/C
N/C 1 2 +12V
N/C 3 4 N/C
N/C 5 6 CTST_OP
N/C 7 8 CTST_OUT
N/C 9 10 CTST_IN
N/C 11 12 CAL_OUT
TAL_OUT 13 14 N/C
GND 15 16 GND