Professional Documents
Culture Documents
The core is built with high permeability grain oriented silicon steel laminations
for low losses. The windings are copper wire with copper plate double
isolation. The concentric distribution of the coils prevents magnetic flux
leakage, achieving greater accuracy and higher capacity to withstand
mechanical stresses in adverse operating conditions. The cores and windings
are located in the upper part of the transformer. This head is coated with a
conductive layer, which provides an adequate electric field control.
Mechanical characteristics
Insulation Material Colors Weight (lbs.) Creepage distance (in) Strike distance (in)
Resin Gray* 771 109.4 33
H2 H1
13.78” (350)
62” (1576)
13.78” (350)
Terminal
Ground
box
connector
H1 H2
MARKING X1 X2
CONNEC- (Single
TIONS Primary
ONE SECONDARY with tap
Ratio)
H1 H2
Type: PM30MC0-1-4N-E Type: LZ-500 Type: Hex screw
Material: Aluminum Material: Copper Material: Steel
Range: 4/OTRE-500MCM X1 X2 Xn
Electrical characteristics
Power-Frequency
Continuous Withstand Voltage
Current Short- Short-
Thermal Nominal (1 min)
Ratio time time
Code Code Current IEEE Metering Relay Voltage BIL
(Primary: Thermal Mechanical
(CEP) (HCEP) Rating Accuracy Accuracy System (kV) Primary & Secondary
Secondary) Current Current
Factor @ (kV) Secondary Winding
(A) (kA/1s) (kApeak)
30°C (kVrms) (kVrms)
756172005 756170000-H 25/50:5 2.0/1.5 5 9.5 0.3B-1.8/0.3B1.8 T200/T400 69 350 140 2.5
756172006 756170001-H 30/60:5 2.0/1.5 6 11.4 0.3B-1.8/0.3B1.8 T200/T400 69 350 140 2.5
756172010 756170002-H 50/100:5 2.0/1.5 10 19 0.3B-1.8/0.3B1.8 T200/T400 69 350 140 2.5
756172015 756170003-H 75/150:5 2.0/1.5 15 28.5 0.3B-1.8/0.3B1.8 T200/T400 69 350 140 2.5
756172020 756170004-H 100/200:5 2.0/1.5 20 38 0.3B-1.8/0.3B1.8 T200/T400 69 350 140 2.5
756172030 756170005-H 150/300:5 2.0/1.5 30 57 0.3B-1.8/0.3B1.8 T200/T400 69 350 140 2.5
756172040 756170006-H 200/400:5 2.0/1.5 40 76 0.3B-1.8/0.3B1.8 T200/T400 69 350 140 2.5
756172060 756170007-H 300/600:5 2.0/1.5 60 86.7 0.3B-1.8/0.3B1.8 T200/T400 69 350 140 2.5
756172080 756170008-H 400/800:5 2.0/1.5 60 114 0.3B-1.8/0.3B1.8 T200/T400 69 350 140 2.5
756172100 756170009-H 500/1000:5 2.0/1.5 75 142.5 0.3B-1.8/0.3B1.8 T200/T400 69 350 140 2.5
756172120 756170010-H 600/1200:5 2.0/1.5 90 171 0.3B-1.8/0.3B1.8 T200/T400 69 350 140 2.5
756172150 756170011-H 750/1500:5 2.0/1.5 90 171 0.3B-1.8/0.3B1.8 T200/T400 69 350 140 2.5
756172200 756170012-H 1000/2000:5 2.0/1.5 90 171 0.3B-1.8/0.3B1.8 T400/T800 69 350 140 2.5
756172300 756170013-H 1500/3000:5 2.0/1.0 90 171 0.3B-1.8/0.3B1.8 T400/T800 69 350 140 2.5
Notes: