Professional Documents
Culture Documents
Cummins C135 D6 Data Sheet
Cummins C135 D6 Data Sheet
Model: C135 D6
Frequency: 60 Hz
Fuel type: Diesel
Standby Prime
Fuel consumption kVA (kW) kVA (kW)
Ratings 169 (135) 153 (123)
Load 1/4 1/2 3/4 Full 1/4 1/2 3/4 Full
gph 3.5 5.3 8.0 10.6 3.5 4.9 7.8 9.2
L/hr 13.40 19.90 30.30 40.00 13.10 18.50 29.50 35.00
Fuel flow
Maximum fuel flow, L/hr 45
Maximum fuel inlet restriction, mm Hg 101/203 (clean/dirty filter)
Maximum fuel inlet temperature, °C 71
power.cummins.com
©2017 Cummins Inc. | EMERD-5834 (10/17)
Air Standby rating Prime rating
3
Combustion air, m /min 10.73 10.14
Maximum air cleaner restriction, kPa 3.74
Exhaust
3
Exhaust gas flow at set rated load, m /min 36 35
Exhaust gas temperature, °C 490 485
Maximum exhaust back pressure, kPa 10.15
Genset outline
Open set
power.cummins.com
©2017 Cummins Inc. | EMERD-5834 (10/17)
Enclosed set
Outlines are for illustrative purposes only. Please refer to the genset outline drawing for an exact representation of this model.
Alternator data
1 2
Connection Temp rise ºC Duty Alternator Voltage
Wye 163 ESP UCI274E 190 - 200 V & 380 - 400 V
Wye 150 ESP UCI274F 190 - 200 V & 380 - 400 V
Wye 125 PRP UCI274E 190 - 200 V & 380 - 400 V
Wye 105 PRP UCI274F 190 - 200 V & 380 - 400 V
Wye 163 ESP UCI274E 208 - 240 V & 416 - 480 V
Wye 150 ESP UCI274F 208 - 240 V & 416 - 480 V
Wye 125 PRP UCI274E 208 - 240 V & 416 - 480 V
Wye 105 PRP UCI274F 208 - 240 V & 416 - 480 V
Ratings definitions
Emergency Standby Limited-Time Running Prime Power (PRP): Base Load (Continuous)
Power (ESP): Power (LTP): Power (COP):
Applicable for supplying Applicable for supplying Applicable for supplying Applicable for supplying
power to varying electrical power to a constant power to varying electrical power continuously to a
load for the duration of electrical load for limited load for unlimited hours. constant electrical load for
power interruption of a hours. Limited-Time Prime Power (PRP) is in unlimited hours. Continuous
reliable utility source. Running Power (LTP) is in accordance with ISO 8528. Power (COP) is in
Emergency Standby Power accordance with ISO 8528. Ten percent overload accordance with ISO 8528,
(ESP) is in accordance capability is available in ISO 3046, AS 2789,
with ISO 8528. Fuel Stop accordance with ISO 3046, DIN 6271 and BS 5514.
power in accordance with AS 2789, DIN 6271 and
ISO 3046, AS 2789, BS 5514.
DIN 6271 and BS 5514.
©2017 Cummins Inc. All rights reserved. Cummins is a registered trademark of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks of
Cummins Inc. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice.
EMERD-5834 (10/17)