Professional Documents
Culture Documents
Gauge 1676mm
Height 4201mm
Width 3137mm
Weight 126T
BLOCK DIVISION
ENGINE DIVISION
LOCO DIVISION
BLOCK DIVISION:
i. Heavy Weld Shop
Loco Divisions:
ii. Heavy Machine Shop
i. Loco Frame Shop
ii. Pipe Shop
iii. Truck Machine Shop
Engine Divisions:
iv. Sheet Metal Shop
i. Light Machine Shop
ii. Engine Erection Shop v. Traction Assembly Shop
iii. Engine Testing Shop vi. Loco Assembly Shop
iv. Sub Assembly Shop vii. Loco Test Shop
v. Rotor Shop
viii. Loco Paint Shop
vi. Heat Treatment Shop
Production Flow Chart:
Machine Testing
Marking Cutting CAD/ And cutting And
Assembly
out To Size CAM Machinin Joint Evaluatio
g Process n
CHEMICAL & METALLURGICAL TESTING LAB
Chemical & Metallurgical Testing is domain of material science and
engineering that studies the physical and chemical behaviour of metallic
elements, and their intermetallic compounds and their mixture before
used in manufacturing process define/calculate its various properties via
testing for good quality & safety purpose.
Breakdown Maintenance:
Breakdown maintenance is maintenance performed on equipment that has broken down.
Breakdown maintenance may be either planned or it can be unplanned.
Break down of machine can occur due to the following two reasons:
a. Due to unpredictable failure of component which cannot be prevented.
b. Due to gradual wear and tear of the parts of the machine which can be
prevented by regular inspection known as preventive maintenance.
Preventive maintenance:
Preventive maintenance (PM) is a fundamental, planned maintenance activity designed to
improve equipment life and avoid any unplanned maintenance activity.
• Also termed as “planned maintenance” or “systematic
maintenance” .
• An extremely important function for the reduction of the
maintenance cost and to keep the good operational condition
of equipment.
objective of preventive maintenance
reducing shut down period to a maximum.
To keep the machine in proper condition so as to maintain the quality of the product.
For safety purpose from dust particle used glass, rubber, builder plates,cables. And resist from
dust particle, Loco is spry by EZP (EPOXY ZINC PHOSPHATE).
Epoxy Surfacer:-
It is a process in paint (epoxy paint) is used for fill up all the gaps properly.
Fig. paint shop
EXPORTED LOCOMOTIVE:-
In DLW, Figures of some standard locomotive which is exported out of country,