Professional Documents
Culture Documents
Trading comps is a relative valuation technique that uses public company information to infer a
valuation on a target company. The valuation works on the premise that similar or comparable
companies tend to be valued on a similar or comparable basis on the public markets.
The method is often used for:
• Buy side M&A
• Sell side M&A
• Fairness opinions
• Initial public offering (IPO) valuations
• Share repurchases
• Follow on financing
• LBO valuations
The method is very popular with investment bankers and research analysts. Clients are also
very receptive to the valuation technique as the concept is very digestible and is not steeped in
technical jargon.
However, there are some issues that analysts should be aware of:
• The quality of the analysis is dependent on the quality of the comparable inputs. The
process is inherently flawed as no two companies are truly comparable.
• Trading comps is often heavily reliant on accounting information. As the initial chapters of
this manual have highlighted, accounting numbers are prone to manipulation and are often
inconsistently applied within the peer group as well as internationally.
• Trading comps will normally use forecast information to perform the valuation. This
Trading comparables
invariable means relying on equity research. This presents no problems if all the
comparable companies are covered. However, equity research houses do not cover all
companies. Trading comps can therefore become an increasingly spurious exercise if
equity research is unavailable.
• Loss making companies often don’t lend themselves well to trading comps valuation due to
the common reliance on the earning metrics.
• The valuation does not include a control premium. This is not a flaw as such, just a
characteristic of the valuation.
1
Trading comps – a four step structured approach
Enterprise value multiples capture the full value of the claims of the capital providers on the company. The
relative metric (the denominator of the multiple) must also therefore relate to the enterprise. For instance, if
the metric is an earnings metric, then the earnings metric must be an enterprise value level metric. That is,
the earnings metric is claimed by both debt and equity capital providers. Enterprise level metrics are
revenue, EBIT or EBITDA for example.
Equity multiples capture the equity investors claim on the company. The metric must again be consistent
with the equity claim. The relevant earnings metric is normally net income, as this is claimed or owned by
equity capital providers.
2
The financial information is then used to calculate valuation multiples such as:
• EV / Revenue
• EV/ EBIT
• EV/EBITDA
• P/E
These multiples provide a basis for comparison of the companies in the comparable universe.
Companies will trade on different multiples. There will always be reasons for differences in the trading
multiples. It is an analyst’s job to make sure that the differences in trading multiple levels are understood
and are justifiable.
A trading comps model will also calculate a plethora of financial ratios that will be used to support the
multiple justifications.
At this stage analysts will have a number of important decisions to make:
• Which comparable companies should be relied on for the target valuation?
• What type of multiple is most appropriate to value the target?
• How does the target company fit into the comparable universe?
• Is the target a company that should be valued at a premium or a discount to the comparable universe?
• What multiple range should be applied to the target?
Once these very important questions have been addressed, the analyst will then have an appropriate range
of multiples with which to value the target. The multiple range is then applied to the financials of the target
to arrive at a valuation. The valuation is driven off the decisions and analysis derived from the comparable
universe.
These drivers are fundamental to understanding what lies behind a multiple and why some companies trade
with multiples that are at a premium or a discount in relation to the rest of their comparable universe.
The three drivers are derived from a simplified DCF valuation model. Whilst the following equations are not
essential front of head knowledge, they do assist in understanding how and why multiples behave in a
particular way.
The ideas behind the drivers are based on the premise that the enterprise value is the present value of the
cash flows that belong to debt and equity capital providers. This cash flow is better known as free cash
flow to the enterprise or free cash flow to the firm (FCFF). This is the basic principle of a DCF valuation. If
we assume, for illustration purposes, that future free cash flows will grow at a constant rate (g) in perpetuity,
then the EV is as follows:
FCF1
(WACC − g )
Therefore EV is the discounted stream of cash flows that are claimed by debt and equity holders.
3
Growth (g) is driven by the rate of reinvestment of earnings (b) and the return on capital generated on the
reinvestment (r).
Where:
FCF Net operating profit less adjusted taxes: (NOPAT) x (1 – the reinvestment rate (b))
g Growth rate, where growth is driven by the rate of reinvested earnings (b) and the return on
invested capital (r): g = r x b
WACC Weighted average cost of capital (See Chapter 13)
This idea can now be converted into a multiple by dividing both sides of the equation by EBITDA.
EV FCF1 ÷ EBITDA
=
EBITDA (WACC − g )
With this equation the drivers of the multiple can be conceptually extracted:
EV FCF ÷ EBITDA
=
EBITDA (WACC − g )
4
The drivers can be further broken down by examining the components of each variable. Thus when
explaining the behaviour of a multiple, an analyst should be prepared to consider the drives below. The
examination can focus on earnings margin development, working capital management, capex spend in
relation to D&A, risk free rates etc. Any one of these variable could explain a multiple’s behaviour in
relation to its peers.
EV FCF1 ÷ EBITDA
=
EBITDA (WACC − g )
g
WACC
=bxr
Cost of debt
Cost of equity
= (Rf + CMRP) x
= Rf + ß(EMRP)
(1-Tc)
Reinvestment
Risk free rates Risk free rate
rates
Rf Rf
b
It is a simple model based on simplistic assumptions. However the purpose is more focused on the
development of a thought process that examines as many variables as possible; rather than just stating a
multiple is high because the market has strong expectations. That is far too thin an explanation when
considering issues on a professional level.
5
Step 1 – Comparable universe identification
The choice of the comparable universe is the bedrock decision for trading comps. Get the comparable
universe wrong and the valuation will be wrong. The key idea to think about when selecting the comparable
universe is that the selection is attempting to replicate the characteristics of the target company through a
portfolio of companies. The portfolio – the comparable universe – will be used to construct a comparable
multiple for valuation purposes. That multiple needs to reflect the cash, risk and growth characteristics that
are indicative of the target company.
6
The comparable universe choice will consider:
When constructing the comparable universe, it is the quality of the comparable that counts, not the quantity
of companies included in the universe. A comparable universe of 20 companies is likely to have a
significant amount of statistical noise. Often the comparable universe is made up of seven to nine high
quality comparables.
7
Get the comparable universe wrong and your trading comp valuation will be
wrong. Make sure you investigate your comparable universe thoroughly and
use all the resources that are available to you:
• Talk to the right people – deal and industry teams
• Review previous presentations
comparable universe
• Recent prospectus
• Company websites often include competitor references
• Equity and credit research reports sometimes include comparable
universes to support their comps work
• Standard Industry code (SIC) run
• Bloomberg descriptions
Assistance in
choosing the
8
Step 2 – Collecting the comps data
With the comparable universe now selected, sufficient information must now be collected to allow the
calculation and justification of the comparable multiples.
Cadbury plc will be our comparable case study company. At this stage most analysts will not be making
any choices about which type (EV/EBITDA, EV/EBIT or P/E) of multiple to calculate. This type of
decision-making is best done when all of the comparable information has been collected.
For the purposes of this illustration however, we will collect sufficient data for an EV comparable multiple.
Collecting data for an EV comp should provide sufficient information to calculate an equity level multiple too.
Enterprise value
EV has been discussed a number of times in this manual. EV is the cost of buying the right to the whole of
an enterprise’s core cash flow. It is the full takeout value of the firm in an M&A situation.
9
Enterprise value can be described as having three components:
• Total EV – the value of all of the entity’s activities. This includes associates, joint ventures, investments
and non-core assets.
• Operating EV – the value of all operating activities (excludes non-operating assets – usually investments,
and sometimes associates and joint ventures)
• Core EV – focuses on the core operations of the entity.
Most valuation multiples will focus on a core EV, as we will examine later.
10
Calculating EV – Equity value component
Equity value is also called market capitalisation or market cap. The mathematics of the calculation is
relatively straight forward, although the practicalities can be more involved.
Market capitalisation = current share price x number of shares outstanding (NOSH)
The current share price can be picked up from:
• The Financial press – The Financial Times, Wall Street Journal etc
• Data service providers – Thomson One, FACTSET, CAPIQ
• Company websites
The difficulty with the basic market capitalisation calculation is the number of shares (NOSH). The NOSH
will be published in the latest set of financials. However, this is unlikely to be sufficiently up to date for
11
valuation purposes. Companies can take a number of weeks to report financials. So even at best the
reported NOSH will be out of date.
There are two options available to the analyst:
1. Rely on a data provider for a NOSH number. Care must be taken here; data providers may not have the
most up to date information in their databases. It is a useful exercise to cross-check the data provider’s
NOSH against another source. This NOSH method is acceptable in many circumstances. However, if
the NOSH has been subject to recent changes and the comp is being used for a live deal or for numbers
that will be subject to client review, reliance on a data provider may not be acceptable.
Key pricing and NOSH information can be accessed through the Bloomberg
company description screen.
Key strokes:
Getting NOSH on
Bloomberg
2. A more precise NOSH number can be derived by rolling forward the NOSH from the latest reported
financials. The NOSH is rolled forward using stock exchange announcement for any equity issues or
buy backs. These roll forwards are normally reserved for deal comps or instances where there is a lack
of trust in the data service numbers.
12
An additional difficulty with the NOSH calculation is the sheer amount of terminology that surrounds the
number. In a set of financials there are a number of NOSH variants such as:
• Authorised – the number of shares the company is legally allowed to issue
• Issued – the number of shares issued by the company (includes treasury shares)
• Outstanding – the number of shares issued – net of treasury shares
• Weighted average – this is a NOSH number used purely for EPS calculations
Analysts need to initially focus on the outstanding number of shares for the basic market cap calculation.
13
Cadbury comp
The Cadbury basic market capitalisation calculation:
Cadbury plc
Currency £
Current share price 5.58
52 week high 5.62
52 week low 4.78
NOSH (m) 1,361
£m
Current share price 5.58
NOSH (m) 1,361
Market capitalisation 7,594
It is a useful idea to present 52 week share price highs and lows as a benchmarking exercise. The share
price dates would also be noted in practice. Market capitalisation is the major component of EV. It is
therefore very useful to get a feel for the EV number in relation to the market cap trading performance. The
dates will give a feel for market sentiment. In this example we can see that Cadbury is trading very near its
52 week high and hence the market cap will be near its maximum.
Some companies have more than 1 class of equity that will feed into the market
capitalisation calculation. We are not talking here about an entity having
common and preferred shares, which are 2 different types of security.
Different classes of share are created when companies wish to issue a certain
class of share to a particular group of investors. These shares are commonly
called Class A and Class B shares. There is normally a voting distinction
between the classes. For instance, sometimes the Class B shares may have
Dual class
inflated voting rights – for instance 10 votes for every share held. Hence key
investors are provided with greater control over the company’s actions.
Many companies list dual class shares. Ford Inc has 2 classes of share. The
shares
B shares are family held and allow the family to control 40% of the vote whilst
holding only 4% of the equity. Berkshire Hathaway, Warren Buffet’s investment
company, has 2 classes of shares. The B shares in Berkshire have 1/30th of the
equity interest of an A share and 1/200th of the voting power.
14
An ADR is a certificate that provides US investors with ownership of shares in
non-US companies. ADRs trade in the US equity markets. ADRs are issued
by US depository banks. The major depository banks are:
• JP Morgan
• Citi
• Deutsche Bank
• Bank of New York Mellon
Receipt (ADR)
price of an ADR normally tracks the underlying share in relation to the ADR ratio.
American
Documenting your work is vital. Your superiors will review your work and will
wish to know the source of your data and any relevant background detail. Good
documentation will make the review more efficient and you will spend a lot less
time justifying your work. Mistakes will be found and resolved quickly if the
reviewer can see the background detail.
Excel makes documentation very straightforward through the use of comments.
Insert a comment (Shift + F2) in your work and record:
• your name (this should be set up on your profile)
• the source of the data
• note any cross referencing/checking
• any adjustments made to the raw data
• any thoughts relevant to the number
• any issues that need further clarification
Documentation
15
The Documentation CA Tip above notes the use of =FDS coding as a source of
share price information. =FDS codes allow FACTSET data to be incorporated
into Excel financial models. This allows up to date information to be streamed
into the workbook.
The coding syntax is straightforward:
=FDS(“Ticker”,”ITEM(SDATE,EDATE,FRQ)”)
ITEM – indicates the FACTSET data item
Using the FACTSET =FDS
keywords
• Step 4 – Highlight a formula, then click Select
• Step 5 – Specify the dates and optional arguments
• Step 6 – Click OK to bring the formula into the spreadsheet
• Step 7 – Modify the formula to =FDS syntax
• Step 8 – Select the FACTSET Excel link then select =FDS Codes > Recalc
All
16
Information requirement =FDS coding syntax
NOSH =FDS(A1,”FF_COM_SHS_OUT(ANN,0,,,RF)”)
17
Many analysts make significant mistakes with the options note. A lack of
understanding or appreciation of the terminology is the main cause of error.
Key option terminology:
• Exercise or strike price – the price at which an option can be exercised.
• WAEP – weighted average exercise price.
• In the money – An option is in the money (ITM) if the exercise price is
below the current market price.
• Out of the money – An option is out of the money (OTM) if the exercise
price is greater than the current market price.
• Exercise or vesting period – is the period the option must be held before
the option can be exercised.
• Outstanding – an option is deemed outstanding if it has been issued.
• Exercisable – an option is exercisable if held beyond the exercise or
vesting period. The option is said to have vested.
Interpreting the options note
The key column to pick up in an options note for the diluted equity value
calculation is the outstanding options column.
18
The treasury method
The treasury method works on the assumption that the proceeds from the share option exercise will be used
to buy back shares on the market at full market value. Therefore the net dilution from the share option
exercise is net of this buyback.
The following steps are required for the treasury method calculation. The numbers below refer to the
following Cadbury example:
1. Calculate the proceeds from the share option exercise (£280.07m).
2. This involves identifying the share options that are in the money (ITM).
3. Given the disclosures in the financials the ITM determination is normally calculated with reference to the
weighted average exercise price (WAEP)
4. The proceeds = number of options ITM x the exercise price
5. These proceeds are used to buy back shares at full market value = proceeds ÷ current share price
(50.19m shares)
6. Therefore the net dilution = number of shares issued through option exercise – buyback = 62.57m –
50.19m = 12.38m shares net dilution
The dilution can be expressed in terms of the net impact on EV = 12.38m shares x current share price =
£69.05m. This net impact on EV comprises two forces:
• The impact on market capitalisation of the new shares issued as a result of the share option exercise
(number of new shares issued x current market price) and
• The cash proceeds received as a result of the option exercise which will increase the cash number and
reduce net debt (number of new shares issued x exercise price).
19