Professional Documents
Culture Documents
Trobelshuting.
• 12v short or short short input voltage can be caused (1) There is a smd ceramic capacitor that
is short / half short on the input voltage line 12v, the output path of the LP2 diode or the FET QP2 or
(2) LX1.2 short output path (FET contained in )
• AVDD is used to supply voltage to the Panel (Gate driver) and Gamma ic. Damage to these two
components will cause AVDD drops, hot CM501 or hot QP2 FET.
• If the voltage on LX1,2 remains the same as 12v, then this indicates CM501 has not
worked. Check the power_on CM501 pin-9 control for voltage.
• Damage to the DP1 diode causes the voltage to not rise to 15v.
• AVDD voltage is also used to supply the VGH generator circuit. Short VGH lines can certainly
also affect AVDD voltage.
• The AVDD voltage is lost, meaning the VGH voltage is also lost