Professional Documents
Culture Documents
TR ANSFORMER SERVICE
Model TXpert BM
All bushing types (oil filled or dry) with tap connector; (some
Application
bushing models may require a custom tap adapter)
Electrical specifications
Voltage input Sensors: 12 VDC ; Evaluation unit: 24 VDC
Max current max 2.0 A
Measurement specifications
Number of bushings 3 – 6 – one evaluation unit, 3 bushing plus 3 reference VT signal
Communication specifications
Communication protocols MODBUS, Connectivity through CoreTec 4: Modbus, DNP 3, IEC60870, IEC61850
CyberSecurity Applicable only with CoreTec 4: EEE 1686, IEC 62443-4-1, IEC 62443-4-2
Environmental specifications
Operating ambient temperature -10°C to 60°C (-50 to +60C with optional cabinet heater)
Operating ambient humidity 5% to 95% RH non-condensing
—
02 TXpert BM - bushing
monitoring solution
—
03 CoreTec 4 - data
aggregator
— —
1ZBG000090 11.2020
Hitachi ABB Power Grids We reserve the right to make technical changes We reserve all rights in this document and in ABB is a registered trademark of ABB Asea
Customer Connect Center or modify the contents of this document the subject matter and illustrations con- Brown Boveri Ltd. Manufactured by/for a
without prior notice. With regard to purchase tained therein. Any reproduction, disclosure Hitachi Power Grids company.
orders, the agreed particulars shall prevail. to third parties or utilization of its contents -
ABB does not accept any responsibility in whole or in parts - is forbidden without
www.hitachiabb-powergrids.com/ whatsoever for potential errors or possible prior written consent of Hitachi ABB Power
contact-us lack of information in this document. Grids Ltd.