Professional Documents
Culture Documents
Oil Distillation
Chapter 4
Gases
Polymer- Sulfur
ization Plant
Sulfur
LPG
Sat Gas
Gas Plant
Gas Polymerization
Separation & Naphtha
Stabilizer Isom-
erization
Light Naphtha
Alkylate
Aviation
Isomerate
Gasoline
Automotive
Gasoline
Reformate
Naphtha Solvents
Heavy Naphtha
Hydro-
Naphtha Reforming
treating Naphtha
Atmospheric
Distillation
Jet Fuels
Kerosene
Crude
Desalter Kerosene
Oil
Distillate Cat Solvents
AGO Hydro- Naphtha Distillate
cracking Treating &
Hydro-
Blending
Heating Oils
treating
Gas Oil Fluidized
Cat Diesel
LVGO Hydro- Catalytic
treating Cracking Distillates
Vacuum
Distillation
Fuel Oil
HVGO
Cycle Oils
Residual
Fuel Oils
DAO
Solvent
Deasphalting SDA
Coker Asphalts
Bottoms
Naphtha Naphtha
Coke
Updated: July 12, 2018
2
Copyright © 2017 John Jechura (jjechura@mines.edu)
Atmospheric & Vacuum Distillation in U.S.
EIA, Jan. 1, 2018 database, published June 2018
http://www.eia.gov/petroleum/refinerycapacity/
Updated: July 12, 2018
3
Copyright © 2017 John Jechura (jjechura@mines.edu)
Topics
Product Yield Curves – Cut
Point, Overlap, & Tails
Updated: July 12, 2018
4
Copyright © 2017 John Jechura (jjechura@mines.edu)
Configuration:
Atmospheric
Vacuum
Preflash
Updated: July 12, 2018
Copyright © 2017 John Jechura (jjechura@mines.edu)
Atmospheric & Vacuum Tower Complex
Updated: July 12, 2018
6
Copyright © 2017 John Jechura (jjechura@mines.edu)
Atmospheric & Vacuum Tower Complex
Modified drawing from:
“Revamping crude and vacuum units to process bitumen,” Sutikno, PTQ ,Q2 2015
Updated: July 12, 2018
7
Copyright © 2017 John Jechura (jjechura@mines.edu)
Atmospheric Column with Preflash
Modification of figure in “Increasing distillate production at least capital cost,” Musumeci, Stupin, Olson, & Wendler, PTQ, Q2 2015
Updated: July 12, 2018
8
Copyright © 2017 John Jechura (jjechura@mines.edu)
Preflash Options – Tight Oil Example with no AGO
Updated: July 12, 2018
9
Copyright © 2017 John Jechura (jjechura@mines.edu)
Feed Preheat Train & Desalter
Feed Preheat Train Desalter
Initial heat exchange with streams from within Temperature carefully selected — do not let
the tower water vaporize
• Heat recovery important to distillation economics! • Lighter crudes (> 40oAPI) @ 250oF
o First absorb part of the overhead • Heavier crudes (< 30oAPI) @ 300oF
condensation load All crudes contain salts (NaCl, MgCl, …)
o Exchange with one or more of the liquid sides
• Salt present in the emulsified water
streams, beginning with the top (coldest) side
stream • Treated in the field with heat & chemicals to break
oil water emulsions.
• Require flexibility
• Salt can cause damage to equipment
o Changes in crude slate
o Scale in heat exchangers
o Temperature at desalter
o HCl formation can lead to corrosion
o Limits on two‐phase flow through network
o Metals can poison refinery catalysts
Final heating in a direct fired heater
Remove salts & dissolved metals & dirt
• Heat enough to vaporize light portions of the
crude but temperature kept low to minimize • Oil mixed with fresh wash water & demulsifiers.
thermal cracking Separation in electrostatic settling drum
o Inlet typically 550oF, outlet 600 to 750oF. Wash water up to 10% of crude charge
o Heavier crudes cannot be heated to the • ~ 90% of the water can be recovered
higher temperatures
Effluent water treated for benzene
Updated: July 12, 2018
10
Copyright © 2017 John Jechura (jjechura@mines.edu)
Crude Electrostatic Desalting
Drawing by Milton Beychok
http://en.citizendium.org/wiki/File:Desalter_Diagram.png
BFDs from:
Refining Overview – Petroleum Processes & Products,
by Freeman Self, Ed Ekholm, & Keith Bowers, AIChE CD‐ROM, 2000
Updated: July 12, 2018
11
Copyright © 2017 John Jechura (jjechura@mines.edu)
Crude Desalting
Breaking the crude oil/water emulsion important to minimize downstream
problems
Performance of additives
may be crude specific
Picture from:
“Removing contaminants from crude oil”
McDaniels & Olowu, PTQ Q1, 2016
Updated: July 12, 2018
12
Copyright © 2017 John Jechura (jjechura@mines.edu)
Direct Fired Heater
Ref: “Useful tips for fired heater optimisation”
Bishop & Hamilton, Petroleum Technology Quarterly, Q2 2012
Updated: July 12, 2018
13
Copyright © 2017 John Jechura (jjechura@mines.edu)
Atmospheric Distillation Summary
Condenser … Pumparounds
Partial condenser if no Stabilizer Column. Move cooling down column.
Total condenser if Stabilizer Column to Liquid returned above draw tray
remove light ends.
Side draws
… but no reboiler.
Side strippers
Feed preheat exchanger train “Clean up” side products
All of the heat to drive the column comes
from the hot feed. Stripping steam
• As much as 50% of the incoming crude may Reduce hydrocarbon partial pressure
be flashed. Condensed & removed as a second liquid
• “Overflash” phase.
o Extra amount of material vaporized to • Conditions set so it doesn’t condense
ensure reflux between flash zone & within the column – can lead to foaming
lowest side draw • Must be treated as sour water
o Typically 2 vol% of feed
Updated: July 12, 2018
14
Copyright © 2017 John Jechura (jjechura@mines.edu)
Atmospheric Distillation Summary
Wash Zone Side Draws & Strippers
Couple trays between flash zone & gas oil Side strippers remove light component “tail” &
draw. return to main column
Reflux to wash resins & other heavy materials Steam strippers traditional
that may contaminate the products. • Reboiled strippers reduce associated sour water &
may reduce steam usage
Condenser
Typically 0.5 to 20 psig. Trays & Pressure Profile
Balancing act Typically 32 trays in tower
• Low pressures reduce compression on overhead 0.1 psi per tray for design & target for
system operation
• High pressures decrease vaporization but increase • May find as high as 0.2 psi per tray, but probably
flash zone temperatures & furnace duty; affects flooding!
yields Condenser & accumulator
Pumparounds • 3 to 10 psi across condenser
• Liquid static head in accumulator
Reduces overhead condenser load & achieves
more uniform tower loadings Typically 6 to 16 psi across entire column.
Provides liquid reflux below liquid draws
Updated: July 12, 2018
15
Copyright © 2017 John Jechura (jjechura@mines.edu)
Vacuum Distillation
Updated: July 12, 2018
16
Copyright © 2017 John Jechura (jjechura@mines.edu)
Vacuum Distillation – Trays vs. Packing
Packing used in vacuum towers
instead of trays
Lower pressure drops across
the tower – vapor “slides by”
liquid instead of pushing
through the layer on the tray
Packing also helps to reduce
foaming problems
“Foaming in fractionation columns”
M. Pilling, PTQ, Q4 2015
Updated: July 12, 2018
17
Copyright © 2017 John Jechura (jjechura@mines.edu)
Vacuum Distillation Summary
Column Configuration Feed
Vacuum conditions to keep operating Atmospheric residuum
temperatures low All vapor comes from the heated feed
Large diameter column Under vacuum (0.4 psi)
Very low density gases Separate higher boiling materials at
Condenser only for water vapor lower temperatures
Liquid reflux from pumparounds • Minimize thermal cracking
No reboiler Products
Stripping steam may be used
May have multiple gas oils
• Needed for deep cuts (1100oF)
• Usually recombined downstream to FCCU
Common problem – coking in fired after hydrotreating
heater & wash zone Vacuum resid
• Fired heater – high linear velocities to • Blended — asphalt, heavy fuel oil
minimize coke formation
• Further processing — thermal, solvent
• Wash zone – sufficient wash oil flow to
o Depends on products & types of crude
keep the middle of the packed bed wet
Updated: July 12, 2018
18
Copyright © 2017 John Jechura (jjechura@mines.edu)
Vacuum Distillation Summary
Dry System Steam Ejectors & Vacuum Pumps
1050oF+ cut temperature & no stripping steam Vacuum maintained on tower overhead
Smaller tower diameters Steam systems considered more reliable
Reduced sour water production Waste steam is sour & must be treated
Pressure profile Combinations systems — Last steam stage
• Flash zone: 20‐25 mmHg abs & 750 to 770oF. replaced with a vacuum pump
• Top of tower: 10 mmHg abs
Deep Cut System
1100oF+ cut temperature & stripping steam
Steam reduces hydrocarbon partial pressures
Pressure profile
• Flash zone: 30 mmHg abs
• HC partial pressure 10‐15 mmHg abs
• Top of tower: 15 mmHg abs
Drawing from http://www.enotes.com/topic/Injector
Updated: July 12, 2018
19
Copyright © 2017 John Jechura (jjechura@mines.edu)
Example Crude Preheat Trains
Ref: “Improve energy efficiency via Heat Integration”
Rossiter, Chemical Engineering Progress, December 2010
Updated: July 12, 2018
20
Copyright © 2017 John Jechura (jjechura@mines.edu)
“Composite Curve” for Preheat Train
Compare amount of heat
available & at what
temperatures
Goal is to shift the hot &
cold composite curves as
close as possible
“Pinch” technology
This will reduce the
amount of “excess” heat
to be “thrown away” to
the environment
This will also reduce the Ref: “Energy savings in preheat trains with preflash”
Bealing, Gomez‐Prado, & Sheldon, PTQ, Q2 2016
amount of “fresh” heat
added to the system
Updated: July 12, 2018
21
Copyright © 2017 John Jechura (jjechura@mines.edu)
Example – Existing Preheat Train
Ref: “Energy savings in preheat trains with preflash”
Bealing, Gomez‐Prado, & Sheldon, PTQ, Q2 2016
Updated: July 12, 2018
22
Copyright © 2017 John Jechura (jjechura@mines.edu)
Example – Improved Preheat Train
Ref: “Energy savings in preheat trains with preflash”
Bealing, Gomez‐Prado, & Sheldon, PTQ, Q2 2016
Updated: July 12, 2018
23
Copyright © 2017 John Jechura (jjechura@mines.edu)
Product Yield Curves
Updated: July 12, 2018
Copyright © 2017 John Jechura (jjechura@mines.edu)
Typical “Cut Point” Definitions
Updated: July 12, 2018
25
Copyright © 2017 John Jechura (jjechura@mines.edu)
Product Yield Curves – Cut Point, Overlap, & “Tails”
Industrial distillation columns do not provide
perfectly sharp separations
Initial calculations using crude oil assays
assume that all materials at a certain boiling
point goes to one product or another
Imperfect separations result in light‐ends &
heavy‐ends “tails” in adjacent products
Presence of tails complicate the definition of
“cut point”
Analysis
Scale distillation curves to represent the
volume removed
“Cut point“ temperature represents the feed’s
TBP corresponding the cumulative volume
removed
“Tail” represents the light fraction’s amount Ref: R.N. Watkins, Petroleum Refinery Distillation, 2nd ed., 1979
above the cut point & the heavy fraction’s
amount below the cut point
Updated: July 12, 2018
26
Copyright © 2017 John Jechura (jjechura@mines.edu)
Example – Atmospheric Tower Products
Updated: July 12, 2018
27
Copyright © 2017 John Jechura (jjechura@mines.edu)
Example – Atmospheric Tower Products
Updated: July 12, 2018
28
Copyright © 2017 John Jechura (jjechura@mines.edu)
Example – Scale to Fraction of Crude Charge
Updated: July 12, 2018
29
Copyright © 2017 John Jechura (jjechura@mines.edu)
Scale to Fraction of Crude Charge
Updated: July 12, 2018
30
Copyright © 2017 John Jechura (jjechura@mines.edu)
Cut Points & Overlaps for Example
Updated: July 12, 2018
31
Copyright © 2017 John Jechura (jjechura@mines.edu)
Boiling Point Ranges for Example
Updated: July 12, 2018
32
Copyright © 2017 John Jechura (jjechura@mines.edu)
Summary
Updated: July 12, 2018
Copyright © 2017 John Jechura (jjechura@mines.edu) 33
Summary
Reported refinery capacity tied to charge Vacuum column to increase the effective
to crude distillation complex cut points
Increase capacity with Pre‐flash column Vacuum columns large diameter to keep
vapor velocities low
Complex column configurations
Vacuum gas oils recombined – only
No reboilers, heat from feed furnaces separated for operating considerations
• Reuse heat via heat exchange between
feed & internal column streams Pressure drops are important, especially
Side draws, pumparounds, side strippers in the vacuum column
• Pumparounds ensure proper liquid reflux
within the column Steam stripping aids in separation
Stripping steam without cracking
3‐phase condensers Metals are undesirable. Can remove
• Condensed water will have hydrocarbons & some metals via desalters.
dissolved acid gases
Pre‐heat train recycles heat
• Products & internal streams heat the feed
• Feed cools the internal streams & products
Updated: July 12, 2018
34
Copyright © 2017 John Jechura (jjechura@mines.edu)
Supplemental Slides
Updated: July 12, 2018
Copyright © 2017 John Jechura (jjechura@mines.edu)
Crude Distillation Unit Costs
Atmospheric column includes
Side cuts with strippers
All battery limits process
facilities
Heat exchange to cool
products to ambient
temperature
Central control system
Petroleum Refining Technology & Economics, 5th ed.
Gary, Handwerk, & Kaiser
CRC Press, 2007
Updated: July 12, 2018
36
Copyright © 2017 John Jechura (jjechura@mines.edu)
Crude Distillation Unit Costs
Vacuum column includes
Facilities for single vacuum gas
oil
3‐stage vacuum jet system at
30 – 40 mmHg
Heat exchange to cool VGO to
ambient temperature
Petroleum Refining Technology & Economics, 5th ed.
Gary, Handwerk, & Kaiser
CRC Press, 2007
Updated: July 12, 2018
37
Copyright © 2017 John Jechura (jjechura@mines.edu)
Crude Distillation Technologies
Provider Features
Foster Wheeler
Shell Global Solutions Complex of atmospheric & vacuum distillation for initial separation of
crude oil. May include pre‐flash column.
TECHNIP
Updated: July 12, 2018
38
Copyright © 2017 John Jechura (jjechura@mines.edu)
“Typical” Distillation Column
Top of column – condenser to remove heat
Provides liquid reflux through top of column
Partial condenser may have vapor but no liquid distillate product
Coldest temperature – cooling media must be even colder
Lowest pressure
Top section strips heavy components from the rising vapors
Feed
Vapor, liquid, or intermediate quality
Introduced in vapor space between trays
Internals
Trays to contact rising vapors with falling liquids
Pressure drop across trays – overcome static head of liquid on tray, …
Bottom of column – reboiler to add heat
Provides vapor traffic in bottom of column
Highest temperature – heating media must be even hotter
Highest pressure
Bottom section strips light components from the falling liquid
Updated: July 12, 2018
39
Copyright © 2017 John Jechura (jjechura@mines.edu)
Fractionation Columns & Trays
Drawings by Henry Padleckas
http://en.wikipedia.org/wiki/Fractionating_column
Updated: July 12, 2018
40
Copyright © 2017 John Jechura (jjechura@mines.edu)
Fractionation Tray Types
http://www.termoconsult.com/empresas/acs/fractionation_trays.htm
Updated: July 12, 2018
41
Copyright © 2017 John Jechura (jjechura@mines.edu)
Trays & Packing
http://www.ec21.com/product‐details/Tower‐Internals‐‐3942077.html
Updated: July 12, 2018
42
Copyright © 2017 John Jechura (jjechura@mines.edu)
Typical Overall Efficiencies
Typical Typical No. of Drickamer &
Typical No. of
Column Service Overall Theoretical Viscosity Maxwell Bradford in Rules of Thumb for Chemical Engineers, 4th ed.
Actual Trays
Efficiency Trays Ludwig Carl Branan, Gulf Professional Publishing, 2005
Simple Absorber/Stripper 20 – 30 20 – 30 Molal Ave
Ave Viscosity of
Steam Side Stripper 5 – 7 2 cP Viscosity of
liquid on plates
Reboiled Side Stripper 7 – 10 3 – 4 Feed
Reboiled Absorber 20 – 40 40 – 50 0.05 … 98
0.10 104 79
Deethanizer 25 – 35 65 – 75
0.15 86 70
Depropanizer 35 – 40 70 – 80
0.20 76 60
Debutanizer 38 – 45 85 – 90
0.30 63 50
Alky DeiC4 (reflux) 75 – 90 85 – 90 0.40 56 42
Alky DeiC4 (no reflux) 55 – 70 55 – 65 0.50 50 36
Naphtha Splitter 25 – 35 70 – 75 0.60 46 31
C2 Splitter 110 – 130 95 – 100 0.70 43 27
C3 Splitter 200 – 250 95 – 100 0.80 40 23
C4 Splitter 70 – 80 85 – 90 0.90 38 19 Engineering Data Book, 12th ed.
Amine Contactor 20 – 24 4 – 5 1.00 36 17 Gas Processors Association, 2004
Amine Stripper 20 – 24 45 ‐ 55 9 – 12 1.50 30 7
Crude Distillation 35 – 50 50 – 60 20 – 30 1.70 28 5
Stripping Zone 5 – 7 30 2
Flash Zone – 1st draw 3 – 7 30 1 – 2
1st Draw – 2nd Draw 7 – 10 45 – 50 3 – 5
nd rd
2 Draw – 3 Draw 7 – 10 50 – 55 3 – 5
Top Draw – Reflux 10 – 12 60 – 70 6 – 8
Vacuum Column (G.O. Operation)
Stripping 2 – 4 1
Flash Zone – HGO Draw 2 – 3 1 – 2
HGO Section 3 – 5 2
LGO Section 3 – 5 2
FCC Main Fractionator 24 – 35 50 – 60 13 – 17
Quench Zone 5 – 7 2
Quench – HGO Draw 3 – 5 2 – 3
Refinery Process Modeling
HGO – LCGO 6 – 8 3 – 5
Gerald Kaes, Athens Printing Company, 2000, pg. 32
LCGO – Top 7 – 10 5 – 7
Updated: July 12, 2018
43
Copyright © 2017 John Jechura (jjechura@mines.edu)
Vacuum Tower Transfer Lines
Mass transfer effects in the transfer line complicate the effects at the bottom
of the Vacuum Tower
“Myth of high cutpoint in dry vacuum units ,” S. Golden, T. Barletta, & S. White, PTQ, Q2 2014
Updated: July 12, 2018
44
Copyright © 2017 John Jechura (jjechura@mines.edu)